Search

The condition assessment of oil–paper insulation is a vital issue in transformer management. To investigate the effect of moisture content on the accuracy of the prediction model, accelerated ageing experiments were performed with different initial moisture content (IMC) in laboratory condition. Two types of multi-parameter lifetime prediction models, e.g. with and without consideration of IMC, were presented for comparison purpose. The authors found that a better accuracy for its prediction results could be achieved by establishing the prediction models with the consideration of IMC. Besides, models considering IMC have better economic feasibility than that without considering IMC(non-IMC) as its total cost is cheaper according to life cycle cost (LCC) calculations. In addition, failure probability based on the proposed prediction models was also calculated as a direct indicator for evaluating the oil–paper insulation status. [ABSTRACT FROM AUTHOR]

Nomex insulation paper has been widely used in mining dry type transformer insulation because of its excellent performance. However, the injection of space charge can affect the electrical properties of the Nomex paper and accelerate the ageing process of the insulation system, which causes the insulation system failure or even breakdown. Therefore, it is of great practical value to study the space charge characteristics of Nomex insulation paper in different hygrothermal ageing conditions. The accelerated hygrothermal ageing tests of Nomex insulation specimens with different initial moisture contents were conducted. The space charge distribution of specimens impregnated by varnish were measured by the pulsed electro‐acoustic method at different ageing stages. Simultaneously, the space charge characteristics during polarising and depolarising phases were deeply analysed. Experimental results show that negative charges accumulate between the varnish‐paper interface in specimens near the anode. The number of negative charges gradually decreases with the increase of ageing degree. Under the influence of humidity, Nomex paper can be hydrolysed, which increases the trap density and trap level. Finally, a large amount of positive and negative charges in aged specimens would result in the distortion of the local electric field, which could decrease the breakdown strength of Nomex insulation specimens and be a threat to transformer insulation. [ABSTRACT FROM AUTHOR]

The AC breakdown properties of Kraft paper, pressboard and the enamel insulation layer in riceoil, peanut oil and corn oil were investigated under both new and agedconditions. The ageing of paper insulators and the enamel insulation layer inoils with the open cup method was carried out at 130 oC for 500 h in an aircirculation oven. The puncture breakdown strength was determined by varying thenumber of layers and thickness of Kraft paper, while various electrode gapdistances were used to measure the surface breakdown strength. Experimentalresults show that the breakdown strength and the tensile strength of paperinsulators impregnated with these vegetable oils are comparable to that inmineral oil, and the surface breakdown strength of paper insulators is slightlyaffected by types of impregnating oils. The ageing significantly reduces boththe breakdown strength and the tensile strength of paper insulators ininvestigated oils. In addition, it was also found that the enamel layer invegetable oils withstood higher puncture breakdown strength than in mineral oil,and the ageing process significantly reduced the puncture breakdown strength ofthe enamel layer. This enamel layer was observed to markedly enhance the surfacebreakdown strength of pressboard. [ABSTRACT FROM AUTHOR]

To investigate the effect of aging on surface discharge of the pressboard on the shielding electrode at the end of bushing, a thermal aging preparation methods of different aging degrees of pressboard samples, surface defect model, and the associated hemisphere are designed and the step‐up method is used for subsequent experimental work. Finally, the partial discharges (PDs) under different degrees of aging are compared and combined with Fourier Transform Infrared spectra and electric field simulation. Results show that the pre‐discharge occurs mainly in the oil gap between the hemispherical electrode edge and the pressboard. The aging of the pressboard exerts no obvious effect on the discharge characteristics in the initial stage of PD; with the development of the discharge, the development of aging of pressboard leads to a higher electric field intensity acting over a greater area, the more intense the discharge, the faster the relative discharge increases and the larger its amplitude. This discharge will cause decomposition of the oil in the pores of the aging pressboard thus generating gas bubbles which will move as discharge develops. When the bubbles reach the surface of the pressboard, the local electric field intensity will increase and the discharge will become more intense. [ABSTRACT FROM AUTHOR]

The oil‐impregnated transformer is an important part of the power system. The ageing degree of the internal oil‐paper insulation determines the service life of the transformer. The low frequency of the frequency domain dielectric spectroscopy can effectively characterise the ageing degree of transformer oil‐paper insulation. For accurately and quantitatively evaluate the aging state of oil‐paper insulation of transformer, the physical process of low‐frequency electrode polarisation is theoretically analysed in this work. Considering the polarisation of the low‐frequency electrode, the theoretical expression of the dielectric response of the equivalent XY model of the transformer is obtained. Meanwhile, to verify the rationality of the theoretical expression, the accelerated thermal ageing test of the oil‐paper insulation samples were carried out under laboratory conditions. The DC conductivity, ion mobility and FDS tests of oil‐paper insulation samples were tested on ageing 5, 10 and 15 days, respectively. The test results were combined with the theoretical expression of the low‐frequency dielectric response. It is found that the difference between the calculated result and the measured result is small. Therefore, the theoretical expression of the transformer equivalent XY model can be applied to calculate the dielectric parameters of the oil‐paper insulation at low‐frequency. [ABSTRACT FROM AUTHOR]

The service life of a transformer depends on the ageing degree of the internal oil–paper insulation. In order to reliably predict the remaining service life of oil–paper insulation for a single transformer, this study proposes a method based on monitoring the performance degradation data of oil–paper insulation. In this study, the remaining life prediction model of oil–paper insulation is established according to the Wiener stochastic process. The parameters of the model are iteratively updated by using the Bayesian rule and maximum expectation algorithm. The objective of remaining service life prediction of transformer oil–paper insulation is achieved. In the laboratory, multiple groups of oil–paper insulation samples undergo an ageing test at 130°C. Certain amount of performance degradation data is obtained by continuously monitoring the oil–paper insulation. Along with the prediction method of remaining life, the accuracy of the remaining life prediction of transformer oil–impregnated paper is verified when the model parameters are updated. This is a significant guiding factor for predicting the remaining life through the performance degradation data of the continuously operating transformer. [ABSTRACT FROM AUTHOR]

Induction period evaluated from time domain dielectric response of oil‐paper insulation (OPI) contains information related to heat dissipating property of oil. In the present paper, effect of aging sensitive oil properties on the value of induction period is investigated. Three types of dielectric liquids (pure mineral oil, synthetic ester, mixture of synthetic ester, and mineral oil) are considered for the present work. A neural network (NN) is used for modelling the non‐linear relationship between induction period and various oil properties. The trained network is subsequently used to study the influence of various oil properties on induction period. [ABSTRACT FROM AUTHOR]

Near Infrared Spectroscopy (NIRS), as one of analysis technologies, has shown promisingly industrial applications for significant properties for recent decades such as fast response, preciseness, non-intrusion etc. Here, the authors employed NIRS coupled with a series of physical and chemical tests to assess the ageing condition of oil-paper insulation, which is responsible for the main insulation type of high-voltage power transformer. Among these procedures, the data analytic algorithms are of utmost importance to determine the evaluation precision. After plenty of trial-and-error, Savitzky-Golay (S-G) convolution was finally utilised to de-noise samples and improve the spectral data quality. The competitive adaptive reweighted sampling (CARS) was used to select the optimal wavelength combination of NIRS, which is found able to fully extract the effectively spectral information and reduce dimensions of spectral data. Based on the above-mentioned techniques, the quantitative analysis model of NIRS was established by partial least squares (PLS), which could synthetically process the spectral data and the degree of polymerisation (DP) of paper samples. The results indicated that compared with the traditional detection methods, the NIRS analysis is a powerful and informative tool to characterise the condition of oil-paper insulation without intrusion or damage to transformers. [ABSTRACT FROM AUTHOR]

Study of alternate fluids for transformer and their combination with traditional ones is an interesting area of research. The intent of this work is to investigate the thermal ageing performance of ester oils (synthetic and natural), and mixed oil vis‐à‐vis mineral oil. All the samples were thermally stressed at 110, 140, 160, and 185°C for 2 weeks each. Dissolved decay contents in oil and linear thermal expansion coefficients of solid insulation have been studied using ultraviolet visible infrared spectroscopy and dilatometry analysis, respectively, as per ASTM standards. Change in functional groups of the insulation oils with ageing have been understood by Fourier transform infrared spectroscopy analysis. Additionally, diffusion of oil–moisture mixture into paper with ageing and the corresponding effect on dielectric strength of paper has been also examined using ASTM standards. It is observed that the use of synthetic ester (SE) and addition of SE to mineral insulating oil lead to improved performance of oil–paper insulation system with retarding the rate of degradation of the insulation system. [ABSTRACT FROM AUTHOR]

The existing research on furfural analysis mainly focuses on the relationship between the furfural content in oil and the degree of polymerization (DP) of the paper, which are always obtained by accelerated thermal aging at high temperatures. However, the operating temperature of a winding is relatively low, approximately 60°C to 90°C. Thus, the relationship established at high temperature may be not suitable for the operating temperatures. In this research, aging tests of oil‐paper systems at different temperatures (from 100°C to 130°C) were carried out, with the DP, furfural content in oil and furfural content in paper being measured regularly to analyze the effect of temperature variation on the production and diffusion behavior of furfural in oil–paper insulation. The results show that temperature influences the production of furfural, i.e., there is no obvious difference in the amount of furfural produced by paper in the initial aging periods; however, a higher temperature results in more furfural being produced when the DP decreases to values below 600. An obvious diffusion process occurs after furfural is produced in paper in accelerated aging experiments, resulting in most of the furfural content remaining in the cellulose paper in the initial aging period. [ABSTRACT FROM AUTHOR]

The frequency domain dielectric response method has been one of the most effective approaches for condition assessment of an electrical insulation system. The low‐frequency part is more effective for diagnosing the moisture content and aging status of oil‐paper insulation. To facilitate the study of the low‐frequency dielectric spectrum of oil‐paper insulation, a model applicable to the low‐frequency dielectric response of insulation oil is proposed in this study, which is based on the ionic motion of insulation oil. The creation of charge carriers under field test conditions mainly derives from the dissociation of ionic pairs. During testing, ionic motion of insulation oil is jointly affected by thermal diffusion and the electric field; moreover, dissociation and recombination of negative and positive ions also occur. Therefore, the above factors were all considered in the modelling process. The applicability of the model is verified against measured results. For further interpreting the proposed model, the characteristics of the ionic concentration distribution, the relation between ionic distribution and dielectric properties, and the application of the proposed model are analysed. [ABSTRACT FROM AUTHOR]

This study investigated the inhibitory effects of adsorption treatment on the degradation of oil–paper insulation and corrosive sulphur in oil. A thermal ageing experiment at 130°C was conducted using five different adsorbents to adsorb some impurities in oil on the 15th day of a 30 day ageing test, the related characteristics of oil–paper insulation before and after the adsorption treatment were measured and analysed. Meanwhile, a thermal ageing experiment at 150°C was also conducted before using five different adsorbents to adsorb dibenzyl disulphide (DBDS) in oil, energy dispersive X‐ray was used to evaluate the degree of the corrosion of windings. The result indicates that adsorption treatment is an effective method to inhibit the degradation of oil–paper insulation. A molecular sieve, silica gel and activated alumina can effectively improve the performance of oil–paper insulation. By contrast, the antioxidant (2, 6‐di‐tert‐butyl‐p‐cresol) can be also adsorbed by adsorbents, which accelerate the ageing degradation of the insulating oil. On the other hand, the adsorbents can adsorb DBDS in oil, but cannot remove all DBDS. The effect achieved from silica gel is especially significant, which not only effectively improves the performance of oil–paper insulation but also adsorbs DBDS in oil. [ABSTRACT FROM AUTHOR]

Frequency domain spectroscopy (FDS) is being used to assess the insulation condition of oil–paper power transformers. However, it has to date only been implemented on de‐energised transformers, which requires the transformers to be shut down for an extended period and may cause significant costs. To solve this issue, a newly improved monitoring method based on the FDS principle is proposed to implement the dielectric measurement on energised transformers. Moreover, a chirp waveform excitation and its novel processing method are introduced. Compared with the conventional FDS results, dielectric results from the energised insulation system have higher tanδ values because of the increased losses. To further understand the insulation ageing process, the effects of the geometric capacitance are removed from the measured imaginary admittance of the insulation system to enhance the ageing signature. The resulting imaginary admittance is then shown to correlate well with the central time constant in return voltage measurements results. The proposed methods address the issues on techniques used on energised transformers and provide a clue for on‐line FDS diagnostic application. [ABSTRACT FROM AUTHOR]