Search

Due to the controllable degrees of freedom of frequency diverse array in the distance dimension, the frequency diverse multiple‐input multiple‐output (FDA‐MIMO) radar can easily deal with mainlobe interference, which is often difficult to solve in traditional phased arrays. Nevertheless, the performance of FDA‐MIMO radar will suffer from degradation in the scenario where spectrum interferences and signal‐dependent interferences coexist. In order to solve this problem, a novel FDA‐MIMO radar framework via antenna switching is proposed. Based on this framework, an effective method for jointly optimising antenna selection and beamforming against spectrum interferences and signal‐dependent interferences is developed. The resulting optimization problem is nonconvex and NP‐hard owing to the integer constraints caused by antenna selection. By relaxing the integer constraints, the original problem can be transformed into a convex optimization form and an iterative reweighting strategy is used to force the obtained solution to satisfy the integer constraints. Simulation examples show that the proposed algorithm has better performance in output signal‐to‐interference‐plus‐noise ratio (SINR) and beampattern radiation performance than the existing competitive methods. [ABSTRACT FROM AUTHOR]

The radome can protect the enclosed antenna from harsh weather and environmental conditions; however, it will cause a non‐negligible effect particularly transmission loss on the wideband signal which has been widely used in electronic systems. For this, a novel transmission loss compensation method for radome based on non‐linear frequency modulation (NLFM) waveform design is proposed. First, the transmission coefficient calculation process is given, Then, the detailed NLFM waveform design method is described in detail. Finally, the simulation experiments are demonstrated to verify the effectiveness of the proposed compensation method. Based on the designed NLFM waveform, the transmission loss can be compensated and a flat frequency response can be obtained, which can achieve excellent performance of pulse compression in the range direction. The proposed NLFM design method has great potential application value in the electronic system. [ABSTRACT FROM AUTHOR]

The number of antennas in automotive frequency‐modulated continuous wave (FMCW) multiple‐input multiple‐output (MIMO) radar systems is increasing. Existing greedy or subspace‐based methods cannot quickly and accurately estimate the direction of arrival (DoA) of the target. Therefore, we propose a fast and accurate DoA estimation algorithm for the automotive FMCW MIMO radar. To achieve both fastness and accuracy, we exploit the group sparsity in DoA estimation by defining the problem as a multiple measurement vector (MMV) compressive sensing and extend the step‐learnt iterative soft‐thresholding algorithm (SLISTA) to the MMV problem. To apply the extended SLISTA, we train the network in an unsupervised manner and normalise the input. We conduct experiments to evaluate the performance of the proposed method. Compared to the algorithms such as ISTA/FISTA/MFOCUSS that solve the same optimisation problem, the extended SLISTA exhibits the most accurate DoA estimation results for actual targets, with less execution time than a subspace‐based method. Moreover, the results show that the extended SLISTA prevents false detections, whereas greedy and subspace‐based methods do not. [ABSTRACT FROM AUTHOR]