Search

Conjugated polymers with tailorable composition and microarchitecture are propitious for modulating catalytic properties and deciphering inherent structure‐performance relationships. Herein, we report a facile linker engineering strategy to manipulate the electronic states of metallophthalocyanine conjugated polymers and uncover the vital role of organic linkers in facilitating electrocatalytic oxygen reduction reaction (ORR). Specifically, a set of cobalt phthalocyanine conjugated polymers (CoPc‐CPs) wrapped onto carbon nanotubes (denoted CNTs@CoPc‐CPs) are judiciously crafted via in situ assembling square‐planar cobalt tetraaminophthalocyanine (CoPc(NH2)4) with different linear aromatic dialdehyde‐based organic linkers in the presence of CNTs. Intriguingly, upon varying the electronic characteristic of organic linkers from terephthalaldehyde (TA) to 2,5‐thiophenedicarboxaldehyde (TDA) and then to thieno/thiophene‐2,5‐dicarboxaldehyde (bTDA), their corresponding CNTs@CoPc‐CPs exhibit gradually improved electrocatalytic ORR performance. More importantly, theoretical calculations reveal that the charge transfer from CoPc units to electron‐withdrawing linkers (i.e. TDA and bTDA) drives the delocalization of Co d‐orbital electrons, thereby downshifting the Co d‐band energy level. Accordingly, the active Co centers with more positive valence state exhibit optimized binding energy toward ORR‐relevant intermediates and thus a balanced adsorption/desorption pathway that endows significant enhancement in electrocatalytic ORR. This work demonstrates a molecular‐level engineering route for rationally designing efficient polymer catalysts and gaining insightful understanding of electrocatalytic mechanisms. [ABSTRACT FROM AUTHOR]

Developing efficient and anti‐corrosive oxygen reduction reaction (ORR) catalysts is of great importance for the applications of proton exchange membrane fuel cells (PEMFCs). Herein, we report a novel approach to prepare metal oxides supported intermetallic Pt alloy nanoparticles (NPs) via the reactive metal‐support interaction (RMSI) as ORR catalysts, using Ni‐doped cubic ZrO2 (Ni/ZrO2) supported L10−PtNi NPs as a proof of concept. Benefiting from the Ni migration during RMSI, the oxygen vacancy concentrations in the support are increased, leading to an electron enrichment of Pt. The optimal L10−PtNi−Ni/ZrO2−RMSI catalyst achieves remarkably low mass activity (MA) loss (17.8 %) after 400,000 accelerated durability test cycles in a half‐cell and exceptional PEMFC performance (MA=0.76 A mgPt−1 at 0.9 V, peak power density=1.52/0.92 W cm−2 in H2−O2/−air, and 18.4 % MA decay after 30,000 cycles), representing the best reported Pt‐based ORR catalysts without carbon supports. Density functional theory (DFT) calculations reveal that L10−PtNi−Ni/ZrO2−RMSI requires a lower energetic barrier for ORR than L10−PtNi−Ni/ZrO2 (direct loading), which is ascribed to a decreased Bader charge transfer between Pt and *OH, and the improved stability of L10−PtNi−Ni/ZrO2−RMSI compared to L10−PtNi−C can be contributed to the increased adhesion energy and Ni vacancy formation energy within the PtNi alloy. [ABSTRACT FROM AUTHOR]

Conjugated polymers with tailorable composition and microarchitecture are propitious for modulating catalytic properties and deciphering inherent structure‐performance relationships. Herein, we report a facile linker engineering strategy to manipulate the electronic states of metallophthalocyanine conjugated polymers and uncover the vital role of organic linkers in facilitating electrocatalytic oxygen reduction reaction (ORR). Specifically, a set of cobalt phthalocyanine conjugated polymers (CoPc‐CPs) wrapped onto carbon nanotubes (denoted CNTs@CoPc‐CPs) are judiciously crafted via in situ assembling square‐planar cobalt tetraaminophthalocyanine (CoPc(NH2)4) with different linear aromatic dialdehyde‐based organic linkers in the presence of CNTs. Intriguingly, upon varying the electronic characteristic of organic linkers from terephthalaldehyde (TA) to 2,5‐thiophenedicarboxaldehyde (TDA) and then to thieno/thiophene‐2,5‐dicarboxaldehyde (bTDA), their corresponding CNTs@CoPc‐CPs exhibit gradually improved electrocatalytic ORR performance. More importantly, theoretical calculations reveal that the charge transfer from CoPc units to electron‐withdrawing linkers (i.e. TDA and bTDA) drives the delocalization of Co d‐orbital electrons, thereby downshifting the Co d‐band energy level. Accordingly, the active Co centers with more positive valence state exhibit optimized binding energy toward ORR‐relevant intermediates and thus a balanced adsorption/desorption pathway that endows significant enhancement in electrocatalytic ORR. This work demonstrates a molecular‐level engineering route for rationally designing efficient polymer catalysts and gaining insightful understanding of electrocatalytic mechanisms. [ABSTRACT FROM AUTHOR]

Developing efficient and anti‐corrosive oxygen reduction reaction (ORR) catalysts is of great importance for the applications of proton exchange membrane fuel cells (PEMFCs). Herein, we report a novel approach to prepare metal oxides supported intermetallic Pt alloy nanoparticles (NPs) via the reactive metal‐support interaction (RMSI) as ORR catalysts, using Ni‐doped cubic ZrO2 (Ni/ZrO2) supported L10−PtNi NPs as a proof of concept. Benefiting from the Ni migration during RMSI, the oxygen vacancy concentrations in the support are increased, leading to an electron enrichment of Pt. The optimal L10−PtNi−Ni/ZrO2−RMSI catalyst achieves remarkably low mass activity (MA) loss (17.8 %) after 400,000 accelerated durability test cycles in a half‐cell and exceptional PEMFC performance (MA=0.76 A mgPt−1 at 0.9 V, peak power density=1.52/0.92 W cm−2 in H2−O2/−air, and 18.4 % MA decay after 30,000 cycles), representing the best reported Pt‐based ORR catalysts without carbon supports. Density functional theory (DFT) calculations reveal that L10−PtNi−Ni/ZrO2−RMSI requires a lower energetic barrier for ORR than L10−PtNi−Ni/ZrO2 (direct loading), which is ascribed to a decreased Bader charge transfer between Pt and *OH, and the improved stability of L10−PtNi−Ni/ZrO2−RMSI compared to L10−PtNi−C can be contributed to the increased adhesion energy and Ni vacancy formation energy within the PtNi alloy. [ABSTRACT FROM AUTHOR]

Simultaneously improving activity and stability is a crucial yet challenge in the development of metallic single‐atom‐based catalysts. In current work, a novel approach is introduced to address this issue by combining post‐adsorption and secondary pyrolysis techniques to create a synergistic catalytic system, in which the single atoms (SAs) Fe sites played in the NC matrix (Fe─NC) are coupled with high‐entropy atomic clusters (HEACs). Theoretical calculations reveal that the incorporation of HEACs lead to a rehybridization of the 3d orbital configuration of Fe‐N4, which helps to balance the adsorption/desorption energy of oxygenated intermediates. In situ spectroscopy further reveals that the rate‐limiting step of OH* desorption on HEAC/Fe─NC in oxygen reduction reaction (ORR) is more facile compared to atomic Fe─NC, implying a higher ORR activity. Moreover, the synergistic effect of diffusion activation barriers and configuration entropy contributes to the structural stability of HEAC/Fe─NC, resulting in remarkable durability. Consequently, this unique catalyst exhibits half‐wave potentials of 0.927 and 0.828 V in an aqueous solution of KOH (0.1 m) and HClO4 (0.1 m), respectively, along with excellent durability. The findings propose a novel strategy for modulating the electronic structure of metallic SAs catalysts and enhancing their stability through strong interactions between SAs and HEACs. [ABSTRACT FROM AUTHOR]

Comprehensive Summary Key Scientists The electrochemical processes of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) play a crucial role in various energy storage and conversion systems. However, the inherently slow kinetics of reversible oxygen reactions present an urgent demand for the development of efficient oxygen electrocatalysts. Recently, metal‐organic framework (MOF) derivatives have attracted extensive attention in electrocatalysis research due to their unique porous structure, abundant active sites, and tunable structural properties. Especially, the optimization of the electronic structure of active sites in MOF derivatives has been proven as an effective strategy to enhance the catalytic activity. In this review, we provide an overview of the electronic structure optimization strategies for active sites in MOF derivatives as advanced catalysts in various O—O bond activation reactions, including the construction of synergistic effects between multiple sites, the development of heterogeneous interfaces, the utilization of metal support interactions, and the precise modulation of organic ligands surrounding catalytic active sites at the atomic level. Furthermore, this review offers theoretical insights into the oxygen activation and catalytic mechanisms of MOF derivatives, as well as the identification of active sites. Finally, the potential challenges and prospects of MOF derivatives in electrocatalysis are discussed. This review contributes to the understanding and advancement of efficient oxygen electrocatalysis in energy systems. [ABSTRACT FROM AUTHOR]

In this study, Co/Ni‐NC catalyst with hetero‐diatomic Co/Ni active sites dispersed on nitrogen‐doped carbon matrix is synthesized via the controlled pyrolysis of ZIF‐8 containing Co2+ and Ni2+ compounds. Experimental characterizations and theoretical calculations reveal that Co and Ni are atomically and uniformly dispersed in pairs of CoN4‐NiN4 with an intersite distance ≈0.41 nm, and there is long‐range d–d coupling between Co and Ni with more electron delocalization for higher bifunctional activity. Besides, the in situ grown carbon nanotubes at the edges of the catalyst particles allow high electronic conductivity for electrocatalysis process. Electrochemical evaluations demonstrate the superior ORR and OER bifunctionality of Co/Ni‐NC catalyst with a narrow potential gap of only 0.691 V and long‐term durability, significantly prevailing over the single‐atom Co‐NC and Ni‐NC catalysts and the benchmark Pt/C and RuO2 catalysts. Co/Ni‐NC catalyzed Zn–air batteries achieve a high specific capacity of 771 mAh g−1 and a long continuous operation period up to 340 h with a small voltage gap of ≈0.65 V, also much superior to Pt/C‐RuO2. [ABSTRACT FROM AUTHOR]

The shortage and unevenness of fossil energy sources are affecting the development and progress of human civilization. The technology of efficiently converting material resources into energy for utilization and storage is attracting the attention of researchers. Environmentally friendly biomass materials are a treasure to drive the development of new‐generation energy sources. Electrochemical theory is used to efficiently convert the chemical energy of chemical substances into electrical energy. In recent years, significant progress has been made in the development of green and economical electrocatalysts for oxygen reduction reaction (ORR). Although many reviews have been reported around the application of biomass‐derived catalytically active carbon (CAC) catalysts in ORR, these reviews have only selected a single/partial topic (including synthesis and preparation of catalysts from different sources, structural optimization, or performance enhancement methods based on CAC catalysts, and application of biomass‐derived CACs) for discussion. There is no review that systematically addresses the latest progress in the synthesis, performance enhancement, and applications related to biomass‐derived CAC‐based oxygen reduction electrocatalysts synchronously. This review fills the gap by providing a timely and comprehensive review and summary from the following sections: the exposition of the basic catalytic principles of ORR, the summary of the chemical composition and structural properties of various types of biomass, the analysis of traditional and the latest popular biomass‐derived CAC synthesis methods and optimization strategies, and the summary of the practical applications of biomass‐derived CAC‐based oxidative reduction electrocatalysts. This review provides a comprehensive summary of the latest advances to provide research directions and design ideas for the development of catalyst synthesis/optimization and contributes to the industrialization of biomass‐derived CAC electrocatalysis and electric energy storage. [ABSTRACT FROM AUTHOR]

Proton exchange membrane fuel cells (PEMFCs) and alkaline membrane fuel cells (AEMFCs) have received great attention as energy devices of the next generation. Accelerating oxygen reduction reaction (ORR) kinetics is the key to improve PEMFC and AEMFC performance. Platinum‐based catalysts are the most widely used catalysts for the ORR, but their high price and low abundance limit the commercialization of fuel cells. Non‐noble metal‐nitrogen‐carbon (M−N−C) is considered to be the most likely material class to replace Pt‐based catalysts, among which Fe−N−C and Co−N−C have been widely studied due to their excellent intrinsic ORR performance and have made great progress in the past decades. With the improvement of synthesis technology and a deeper understanding of the ORR mechanism, some reported Fe−N−C and Co−N−C catalysts have shown excellent ORR activity close to that of commercial Pt/C catalysts. Inspired by the progress, regulation strategies for Fe−N−C and Co−N−C catalysts are summarized in this Review from 5 perspectives: (1) coordinated atoms, (2) environmental heteroatoms and defects, (3) dual‐metal active sites, (4) metal‐based particle promoters, and (5) curved carbon layers. We also make suggestions on some challenges facing Fe−N−C and Co−N−C research. [ABSTRACT FROM AUTHOR]

Fe–N–C catalysts are emerging as promising alternatives to Pt‐based catalysts for the oxygen reduction reaction (ORR), while they still suffer from sluggish reaction kinetics due to the discontented binding affinity between the Fe‐N4 sites and oxygen‐containing intermediates, and unsatisfactory stability. Herein, a flexible multichannel carbon fiber membrane immobilized with atomically dispersed Fe‐N4 sites and neighboring Fe nanoclusters/nanoparticles (FeN4‐FeNCP@MCF) is synthesized. The optimized geometric and electronic structures of the Fe atomic sites brought by adjacent Fe nanoclusters/nanoparticles and hierarchically porous structure of the carbon matrix endow FeN4‐FeNCP@MCF with outstanding ORR activity and stability, considerably outperforming its counterpart with FeN4 sites only and the commercial Pt/C catalyst. Liquid and solid‐state flexible zinc–air batteries employing FeN4‐FeNCP@MCF both exhibit outstanding durability. Theoretical calculation reveals that the Fe nanoclusters can trigger remarkable electron redistribution of the FeN4 sites and modulate the hybridization of central Fe 3d and O 2p orbitals, facilitating the activation of O2 molecules and optimizing the adsorption capacity of oxygen‐containing intermediates on FeN4 sites, and thus accelerating the ORR kinetic. This work offers an effective approach to constructing coupling catalysts that have single atoms coexisting with nanoclusters/nanoparticles for efficient ORR catalysis. [ABSTRACT FROM AUTHOR]

Tuning the electrocatalytic selectivity and long‐term stability for industrially significant, yet reactively unfavorable products, remains a challenge in oxygen reduction. Herein, the Au/TiO2 catalysts with strong metal–support interactions (SMSI) are designed and synthesized through an in situ auto‐reduction of Au‐modified Ti‐MOF. Highly dispersed ultra‐low loading of Au NPs strongly capsulated in porous TiO2 substrate, together with conductive carbon derivated from MOFs, enables Au/TiO2 electrocatalysts to achieve excellent H2O2 electrosynthesis through the two‐electron oxygen reduction reaction (2e ORR). Au(1.0)/TiO2 (0.52 wt% Au loading) exhibited a high selectivity of 90%, a remarkable Faradaic efficiency of 98%, and 72.2 mg L−1 h−1 H2O2 production. Highly dispersed Au NPs promote active site exposure, while the conductive carbon and the porous superstructure enhance mass diffusion. Notably, the SMSI between Au NPs and TiO2 substrate leads to superb stability (over 168 h) of the electrocatalysts, as it ensures continuous electronic interactions. Experimental characterizations and density functional theory (DFT) simulations further revealed that the SMSI effect medicates the activation of the *OOH intermediate formation and the d‐band center, which are conductive to 2e ORR. Moreover, this strategy provides a potential way toward high‐performance electrocatalysts in flow system devices for continuously purifying sewage and chemical bleaching in extreme environments. [ABSTRACT FROM AUTHOR]

The oxygen reduction reaction (ORR) in neutral media is of great importance due to its potential to optimize energy generation and storage application. With the increasing urgency for sustainable and efficient energy solutions, comprehensively understanding and enhancing ORR performance in such media have become crucial. This review aims to shed light on this critical yet challenging area. This review encapsulates the fundamental principle of ORR and the latest breakthrough in the field of electrocatalysts, with a distinct focus on innovative synthesis strategies for creating novel, efficient, and robust electrocatalysts. A succinct evaluation of the strengths, limitations, performance, and reaction mechanism is presented. The essential findings are analyzed and their implications for future research directions. Finally, an outlook on current advances, challenges, and future research recommendations is provided. This review serves as a stepping‐stone toward harnessing the underutilizing energy potential within the extensive aquatic environment. [ABSTRACT FROM AUTHOR]

The insufficient durability of Pt‐based catalysts and the sluggish kinetics of oxygen reduction reaction (ORR) is hampering the development of proton exchange membrane fuel cells (PEMFCs) for commercialization. Herein, a single atom Ti‐modified activated nitrogen‐doped porous carbon (Ti‐a‐NPC) is designed to equalize O2‐activation/*OH‐removal through regulating the charge rearrangement of ultra‐small L12‐Pt3Co for efficient and durable oxygen reduction. The Ti single‐atom modified in the surface/pore of Ti‐a‐NPC can anchor the Pt‐based intermetallic nanoparticles (NPs) not only guarantees Pt‐based intermetallics’ ultra‐fine size (≈2.62 nm) but also maintains Pt‐based intermetallics during ORR process. The enhanced catalyst (L12‐Pt3Co/Ti‐a‐NPC) achieves 11‐fold mass activity (1.765 A mgPt−1) compared to commercial Pt/C. Notably, after 30 000 cycles of accelerated durability tests, the mass activity of the L12‐Pt3Co/Ti‐a‐NPC only decreased by 3.7%, while that of commercial Pt/C decreased by 37.1%. Rationalized by theoretical simulation, the introduction of Ti atoms can form charge channels between L12‐Pt3Co NPs and Ti‐a‐NPC, accelerating the charge transfer in the ORR process. Furthermore, the charge of L12‐Pt3Co will accumulate to Ti atoms and buffer the electron transfer of L12‐Pt3Co to the N atoms, thus optimizing the adsorption performance of the active site to the oxygen‐containing intermediate and improving the intrinsic activity of the catalyst. [ABSTRACT FROM AUTHOR]

Shifting from the typical 4e– pathway to H2O in electrochemical oxygen reduction to the 2e– pathway to H2O2 is increasingly recognized as an environmentally friendly approach for producing H2O2. However, the competitive 4e− pathway is a significant obstacle to the production of H2O2 since H2O is the thermodynamically favored product. Here, a series of Pt, Pd, and Rh active atoms diluted within inert‐Au matrices with precisely controlled atomic arrangements and coordination environments are synthesized via facet engineering for O2‐to‐H2O2 production. Surprisingly, individually dispersed Pt atoms within the Au surface enclosed by the square atomic arrangements exhibit superior H2O2 selectivity and achieve a maximum selectivity of 90% at 0.36 V versus the reversible hydrogen electrode. Operando synchrotron ambient pressure X‐ray photoelectron spectroscopy identifies the presence of *OOH key intermediates on these isolated Pt active sites. Grand canonical density‐functional theory also reveals that the kinetic energy barrier for the 2e− pathway (0.08 eV; OOH* + H+ + e− → H2O2) on the isolated Pt sites is significantly lower than the 4e− pathway (0.29 eV; OOH* + H+ + e− → O* + H2O). This work enables atomic‐scale control in dilute binary alloy surfaces with specific configurations of isolated active atoms and provides essential guidance for catalyst design to boost O2‐to‐H2O2 production. [ABSTRACT FROM AUTHOR]

Iron‐nitrogen‐carbon (Fe‐N‐C) single‐atom catalysts are promising sustainable alternatives to the costly and scarce platinum (Pt) to catalyze the oxygen reduction reactions (ORR) at the cathode of proton exchange membrane fuel cells (PEMFCs). However, Fe‐N‐C cathodes for PEMFC are made thicker than Pt/C ones, in order to compensate for the lower intrinsic ORR activity and site density of Fe‐N‐C materials. The thick electrodes are bound with mass transport issues that limit their performance at high current densities, especially in H2/air PEMFCs. Practical Fe‐N‐C electrodes must combine high intrinsic ORR activity, high site density, and fast mass transport. Herein, it has achieved an improved combination of these properties with a Fe‐N‐C catalyst prepared via a two‐step synthesis approach, constructing first a porous zinc‐nitrogen‐carbon (Zn‐N‐C) substrate, followed by transmetallating Zn by Fe via chemical vapor deposition. A cathode comprising this Fe‐N‐C catalyst has exhibited a maximum power density of 0.53 W cm−2 in H2/air PEMFC at 80 °C. The improved power density is associated with the hierarchical porosity of the Zn‐N‐C substrate of this work, which is achieved by epitaxial growth of ZIF‐8 onto g‐C3N4, leading to a micro‐mesoporous substrate. [ABSTRACT FROM AUTHOR]

Isolated dual‐atom catalysts (DACs) have sparked enormous research enthusiasm in new energy community due to their great potentials to substitute the state‐of‐the‐art Pt‐based catalysts. Nevertheless, explicitly unraveling the underlying catalytic mechanisms is of critical significance for performance enhancement, yet remains a huge challenge. Herein, the study reports a reliable hard template‐mediated strategy to accomplish the construction of atomically isolated binuclear Co2‐N6 sites stabilized by ultrathin hollow carbon nanospheres (abbreviated as Co2‐DAs@CHNSs). Systematic spectroscopy characterization and theoretic calculations uncover that the Co2‐N6 sites follow a self‐adjusting mechanism caused by the intrinsic OH intermediate. The involvement of the ‐OH energy‐level modifier is found to induce the electron redistribution and alternation of antibonding orbital fillings for the generated Co2‐N6‐OH site, leading to reduced potential‐determining step (PDS) energy barrier, and thus boosted intrinsic activity. Consequently, the well‐managed Co2‐DAs@CHNSs afford outstanding oxygen reduction reaction (ORR) activity with a half‐wave potential of 0.87 V in alkaline electrolyte, overmatching the Pt benchmark. Furthermore, the Co2‐DAs@CHNSs‐assembled aqueous and all‐solid‐state rechargeable zinc–air batteries (ZABs) demonstrate high power density, large specific capacity, and robust stability. The findings offer an innovative avenue to rationally manipulate the electronic structures of active sites for DACs via a powerful self‐ligand modification strategy. [ABSTRACT FROM AUTHOR]

Doping–dedoping chemistry lays the cornerstone for converting heteroatom dopants into intrinsic defects as the emerging active sites of carbon catalysts, but the defect content is yet hindered by inadequate doping efficiencies. Comprehending crucial factors behind the doping of pristine carbon and their correlation to the catalytic properties of dedoped carbon is thus of high significance. Here, the overlooked impact of native defects in pristine carbon on dopant‐mediated defect engineering of carbon catalysts is explicitly unveiled. Intact fullerene (C60), C60‐derived carbon, and carbon black in distinct pentagon/edge defect states are employed as respective precursors to undergo a nitrogen doping–dedoping treatment. Theoretical and experimental evidence consistently indicates that native pentagons change the preferred N doping site from the edge to the basal plane, leading to a substantially higher doping level. Importantly, in addition to pentagons from the removal of zigzag‐edged pyridinic N, N dopants in in‐plane pentagons are more easily dedoped than those in hexagons, generating even more pentagons in a new pentagon–heptagon–pentagon structure as oxygen reduction active sites. The optimized defect‐rich carbon gives an outstanding half‐wave potential of 0.834 V (0.846 V for Pt/C) via the four‐electron pathway, excellent long‐term durability, and prospective applicability in zinc–air batteries. [ABSTRACT FROM AUTHOR]

Recent years have witnessed great research interests in developing high‐performance electrocatalysts for the two‐electron (2e−) oxygen reduction reaction (ORR) that enables the sustainable and flexible synthesis of H2O2. Carbon‐based electrocatalysts exhibit attractive catalytic performance for the 2e− ORR, where oxygen‐containing functional groups (OFGs) play a decisive role. However, current understanding is far from adequate, and the contribution of OFGs to the catalytic performance remains controversial. Therefore, a critical overview on OFGs in carbon‐based electrocatalysts toward the 2e− ORR is highly desirable. Herein, we go over the methods for constructing OFGs in carbon including chemical oxidation, electrochemical oxidation, and precursor inheritance. Then we review the roles of OFGs in activating carbon toward the 2e− ORR, focusing on the intrinsic activity of different OFGs and the interplay between OFGs and metal species or defects. At last, we discuss the reasons for inconsistencies among different studies, and personal perspectives on the future development in this field are provided. The results provide insights into the origin of high catalytic activity and selectivity of carbon‐based electrocatalysts toward the 2e− ORR and would provide theoretical foundations for the future development in this field. [ABSTRACT FROM AUTHOR]

S‐scheme heterojunction has emerging as a new star in the field of photocatalysis, attributing to its superior separation of photogenerated charge carriers and strong redox abilities. The general designing criteria and several types of S‐scheme heterojunction were provided. Advanced characterization techniques, including Kelvin probe force microscopy, electron paramagnetic resonance spectroscopy, and in‐situ irradiated X‐ray photoelectron spectroscopy, were presented for disclosing the transfer mechanism in S‐scheme heterojunctions. The recent innovations in the application of photocatalytic oxygen reduction reaction in S‐scheme heterojunction based polymeric carbon nitride photocatalyst were discussed. To conclude, this concept highlights the role of S‐scheme heterojunction in photocatalysis and gives future perspectives on their further applications. [ABSTRACT FROM AUTHOR]

Carbon nanomaterials doped with N and B could activate nearby carbon atoms to promote charge polarization through the synergistic coupling effect between N and B atoms, thus facilitating adsorption of O2 and weakening O−O bond to enhance oxygen reduction reaction. Herein, a simple and controllable self‐assembly strategy is applied to synthesize porous B, N co‐doped carbon‐based catalysts (BCN‐P), which employs the macrocyclic molecule cucurbit[7]uril (CB7) as nitrogen source, and 3D aromatic‐like closo‐[B12H12]2− as boron source. In addition, polystyrene microspheres are added to help introduce porous structure to expose more active sites. Benefitting from porous structures and the synergistic coupling effect between N and B atoms, BCN‐P has a high onset potential (Eonset=0.846 V) and half‐wave potential (E1/2=0.74 V) in alkaline media. The zinc‐air battery assembled with BCN‐P shows high operating voltage (1.42 V), peak power density (128.7 mW cm−2) and stable charge/discharge cycles, which is even comparable with Pt/C. [ABSTRACT FROM AUTHOR]

Designing effective electrocatalysts tailored for targeted reactions requires fundamental insights into the structure dependence of the reaction microenvironment. Herein, inspired by finite element simulations, N,O co‐doped carbon nanosheets featuring a hierarchical micro/mesoporous structure to form an oxygen‐rich and local alkaline‐like microenvironment for the two‐electron oxygen reduction reaction (2e− ORR) in a neutral medium are designed. The in situ and ex situ test results confirmed that the micro/mesoporous carbon architecture can elevate the local pH and accelerate the generation of intermediates (*O2, *OOH), leading to high‐efficiency H2O2 production. Utilizing this favorable microenvironment, N,O‐CNS0.5 demonstrated exceptional H2O2 electrosynthesis performance in neutral media, achieving a superior H2O2 yield rate (6705 mmol gcatalyst−1 h−1 in a flow cell). Additionally, comparative experiments and density‐functional theory calculations provided confirmation of the bi‐doping of N and O as the active origin responsible for the electrochemical 2e− ORR. This study synergistically manipulates the reaction microenvironment and active sites, providing an opportunity for efficient H2O2 electro‐production in a neutral medium. [ABSTRACT FROM AUTHOR]

Significant advancements in the activity of nitrogen‐coordinated iron single‐atom catalysts (Fe–N–C) have attracted attention as potential alternatives to Pt‐based cathodes in proton exchange membrane fuel cells. However, their limited stability in acidic environments hinders their practical application. Moreover, achieving a synchronous enhancement of both the activity and stability of the Fe sites while preventing demetallation or carbon corrosion remains a formidable challenge. Herein, a synthesis method for Fe–N–C is introduced that exhibits remarkable durability, featuring a protective carbon encapsulation formed by applying an additional heterocyclic organic compound coating. It is demonstrated that stability can be enhanced by converting edge‐rich Fe sites into highly stable FeN4 moieties through precise control of the robustness and packing density of the carbon encapsulation. Furthermore, electrochemical redox behavior along with in situ spectroscopies and online differential electrochemical mass spectrometry provide insights into the structural characteristics of each Fe site and their stabilities. The accelerated stress testing and a long‐term test (>100 h) exhibit that the robust carbon encapsulation can successfully prevent corrosion of carbon support and ensure durable Fe sites during operation. [ABSTRACT FROM AUTHOR]

Covalent organic frameworks (COFs) are promising photocatalysts for H2O2 production from water via oxygen reduction reaction (ORR). The design of COFs for efficient H2O2 production indubitably hinges on an in‐depth understanding of their ORR mechanisms. In this work, taking an imine‐linked COF as an example, we demonstrate that protonation of the functional units such as imine, amine, and triazine, is a highly efficient strategy to upgrade the activity levels for H2O2 synthesis. The protonation not only extends the light absorption of the COF but also provides proton sources that directly participate in H2O2 generation. Notably, the protonation simplifies the reaction pathways of ORR to H2O2, i.e. from an indirect superoxide radical ( O2•- ${{O}_{2}^{\bullet -}}$ ) mediated route to a direct one‐step two‐electron route. Theoretical calculations confirm that the protonation favors H2O2 synthesis due to easy access of protons near the reaction sites that removes the energy barrier for generating *OOH intermediate. These findings not only extend the mechanistic insight into H2O2 photosynthesis but also provide a rational guideline for the design and upgradation of efficient COFs. [ABSTRACT FROM AUTHOR]

The main group metals are commonly perceived as catalytically inert in the context of oxygen reduction reactions (ORR) due to the delocalized valence orbitals. Regulating the local environment and structure of metal center coordinated by nitrogen ligands (M‐Nx) is a promising approach to accelerate catalytic dynamics. Herein, we, for the first time, report the atomically dispersed Al catalysts coordinated with N and C atoms for 4‐electron ORR. The axial coordinated pyrrolyl N group (No) is constructed in the Al‐N4‐No moiety to regulate the p‐band structure of Al center, effectively steering the local environment and structure of the square planar Al‐N4 sites, which typically exhibit too strong interaction with ORR intermediates. The dynamic covalency competition of axial Al‐No and Al‐O bonding could endow the Al center with moderate hybridization between Al 3p orbital and O 2p orbital, alleviating the binding energy of ORR intermediates. The as‐prepared Al‐N4‐No electrocatalyst exhibits excellent ORR activity, selectivity, and durability, along with the rapid kinetics as demonstrated by in situ Raman spectroscopy. This work offers a fundamental comprehension of the fine regulation on p‐band and guides the rational design of main‐group metal‐based single atom catalysts. [ABSTRACT FROM AUTHOR]

The main group metals are commonly perceived as catalytically inert in the context of oxygen reduction reactions (ORR) due to the delocalized valence orbitals. Regulating the local environment and structure of metal center coordinated by nitrogen ligands (M‐Nx) is a promising approach to accelerate catalytic dynamics. Herein, we, for the first time, report the atomically dispersed Al catalysts coordinated with N and C atoms for 4‐electron ORR. The axial coordinated pyrrolyl N group (No) is constructed in the Al‐N4‐No moiety to regulate the p‐band structure of Al center, effectively steering the local environment and structure of the square planar Al‐N4 sites, which typically exhibit too strong interaction with ORR intermediates. The dynamic covalency competition of axial Al‐No and Al‐O bonding could endow the Al center with moderate hybridization between Al 3p orbital and O 2p orbital, alleviating the binding energy of ORR intermediates. The as‐prepared Al‐N4‐No electrocatalyst exhibits excellent ORR activity, selectivity, and durability, along with the rapid kinetics as demonstrated by in situ Raman spectroscopy. This work offers a fundamental comprehension of the fine regulation on p‐band and guides the rational design of main‐group metal‐based single atom catalysts. [ABSTRACT FROM AUTHOR]

Strategies for discovery of high‐performance electrocatalysts are important to advance clean energy technologies. Metastable phases such as low temperature or interfacial structures that are difficult to access in bulk may offer such catalytically active surfaces. We report here that the suboxide Zr3O, which is formed at Zr−ZrO2 interfaces but does not appear in the experimental Zr−O phase diagram exhibits outstanding oxygen reduction reaction (ORR) performance surpassing that of benchmark Pt/C and most transition metal‐based catalysts. Addition of Fe3C nanoparticles to give a Zr−Zr3O−Fe3C/NC catalyst (NC=nitrogen‐doped carbon) gives a half‐wave potential (E1/2) of 0.914 V, outperforming Pt/C and showing only a 3 mV decrease after 20,000 electrochemical cycles. A zinc‐air battery (ZAB) using this cathode material has a high power density of 241.1 mW cm−2 and remains stable for over 50 days of continuous cycling, demonstrating potential for practical applications. Zr3O demonstrates that interfacial or other phases that are difficult to stabilize may offer new directions for the discovery of high‐performance electrocatalysts. [ABSTRACT FROM AUTHOR]

The oxygen reduction reaction (ORR) represents a cornerstone for many clean energy conversion technologies such as fuel cells and metal‐air batteries. Nevertheless, the commercialization of these technologies is largely impeded by the slow kinetics of ORR, for which active, durable and cost‐effective ORR catalysts are needed. In recent years, zeolitic imidazolate framework (ZIF) derived carbon materials emerge as a new class of non‐precious metal catalysts (NPMCs) toward ORR, largely benefiting from their high surface area, abundant porosity, tunable chemical/electronic structure, and superior ORR activity which is comparable or even surpasses those state‐of‐the‐art Pt‐based ORR catalysts. This review offers a comprehensive overview of the recent advances in ZIF‐derived carbons for ORR. The synthesis strategies and the key factors affecting the ORR performance of ZIF‐derived carbon materials are discussed. Future research directions and perspectives on exploring ZIF derived carbons as efficient ORR catalysts are highlighted, with a focus on the principles of rationally engineering the coordination structures of active sites. [ABSTRACT FROM AUTHOR]

Microwave heating provides a rapid method for the heterogeneous nucleation of noble metal particles on perovskite support materials for electrocatalytic purposes. To succeed, dielectric tuning of perovskite materials becomes fundamental. Herein, the dielectric engineering of the BaMnO3 perovskite system is carried out through the use of B‐site doping to give BaTi0.5Mn0.5O3. Using a combination of atomic‐scale imaging and electron energy loss spectroscopy (EELS), the preferential filling of the M1 and M3 B‐sites with Mn and Ti ions in the 12R‐rhombohedral perovskite structure is established. While the addition of Ti in the BaMnO3 system has no detrimental effects on the presence of the oxygen reduction reaction (ORR) active Mn3+ states at the surface, it does alter the dielectric constant and loss tangent, thus facilitating the heterogeneous nucleation of Pt nanoparticles on BaTi0.5Mn0.5O3 via rapid microwave heating. Higher Pt loading regimes are found to increase the size and aggregation of the nucleated particles, thus reducing their ORR activity. Therefore, lower Pt loading not only reduces costs but improves overall activity. This work represents future possibilities for the dielectric engineering of perovskite and similar support materials to aid in the quick and easy formation of stable noble metal‐support catalytic systems. [ABSTRACT FROM AUTHOR]

Modulating of electronic structure of photocatalyst and integration of dual channel pathway are promising strategy for efficient photosynthesis of hydrogen peroxide (H2O2) from pure water without sacrificial agent and oxygen exposure. In this work, nontoxic aromatic dialdehyde is used to replace the commonly used toxic formaldehyde to form resorcinol‐phthalaldehyde resins through a hydrothermal method. The introducing of aromatic ring as π spacer increases the separation distance of electrons and holes to avoid their recombination. H2O2 can be produced via integrated oxygen reduction reaction (ORR) and water oxidation reaction (WOR) due to the suitable energy band positions and spatially separated reaction sites. Resorcinol‐p‐phthalaldehyde (RP) resin exhibits a promising H2O2 yield of 3351 µmol g−1 h−1 with high apparent quantum yield (AQY) of 14.9% at 420 nm and solar‐to‐chemical conversion (SCC) efficiency of 1.54%. This work provides a simple strategy to modulate the charge separation efficiency and redox reaction pathway on photocatalyst at molecular level design. [ABSTRACT FROM AUTHOR]

Minimizing the use of platinum (Pt) in proton exchange membrane fuel cells (PEMFCs) is crucial for expanding the PEMFC market. The most straightforward approach would be to reduce the size of Pt particles. However, small Pt clusters, particularly those <2 nm in size, typically exhibit reduced activity for the oxygen reduction reaction (ORR) due to the overly strong adsorption of oxygen intermediates. Additionally, these small Pt clusters tend to degrade more quickly, resulting in lower durability. In this study, carbon‐embedded Pt alloy cluster catalysts (PtFe, PtCo, PtNi) that demonstrate high activity and durability in the PEMFC cathode are presented. Density functional theory calculations indicate that carbon atoms stably adsorb onto the Fe sites of PtFe clusters, making the neighboring Pt sites active for ORR with an optimal adsorption strength for oxygen intermediates. This research can pave the way for developing durable and efficient ORR catalysts while significantly reducing Pt usage in PEMFCs. [ABSTRACT FROM AUTHOR]

Photocatalytic oxygen reduction to produce hydrogen peroxide (H2O2) is a promising route to providing oxidants for various industrial applications. However, the lack of well‐designed photocatalysts for efficient overall H2O2 production in pure water has impeded ongoing research and practical thrusts. Here we present a cyanide‐based covalent organic framework (TBTN‐COFs) combining 2,4,6‐trimethylbenzene‐1,3,5‐tricarbonitrile (TBTN) and benzotrithiophene‐2,5,8‐tricarbaldehyde (BTT) building blocks with water‐affinity and charge‐separation. The ultrafast intramolecular electron transfer (<500 fs) and prolonged excited state lifetime (748 ps) can be realized by TBTN‐COF, resulting in a hole accumulated BTT and electron‐rich TBTN building block. Under one sun, the 11013 μmol h−1 g−1 yield rate of H2O2 can be achieved without any sacrificial agent, outperforming most previous reports. Furthermore, the DFT calculation and in situ DRIFTS spectrums suggesting a Yeager‐type absorption of *O2⋅− intermediate in the cyanide active site, which prohibits the formation of superoxide radical and revealing a favored H2O2 production pathway. [ABSTRACT FROM AUTHOR]

With respect to the potential of palladium (Pd)‐based nanomaterials in catalyzing typical electrochemical reactions, herein, a strategy that couples the quick Joule‐heating with a solid phase synthesis for producing carbon‐supported Pd–Se nanoparticles with welcome features is reported, e.g., fine sizes, clean surfaces, and controlled crystal phases toward electrocatalysis of oxygen reduction reaction (ORR) and ethanol oxidation reaction (EOR) in an alkaline medium. Principally, the introduction of Se into Pd alters its electronic properties and weakens the adsorption of key reaction intermediates on the Pd–Se nanoparticles during the ORR and EOR process, thus endowing them with better electrocatalysis for the same electrochemical reactions. Impressively, the carbon‐supported Pd–Se nanoparticles exhibit phase‐dependent electrocatalysis toward ORR and EOR. In particular, the cubic Pd17Se15 nanoparticles supported on carbon substrate show mass activity of 0.206 A mgPd−1 and specific activity of 0.546 mA cm−2 at 0.9 V for ORR in 0.1 m KOH electrolyte, while the orthorhombic PdSe2 nanoparticles show a mass activity of 3.79 A mgPd−1 for EOR, higher than that of their cubic counterpart and commercial Pd/C catalyst. The universality of this synthetic strategy in manufacturing carbon‐supported noble metal chalcogenide nanoparticles and highlighting its potential in designing highly efficient electrocatalysts are emphasized. [ABSTRACT FROM AUTHOR]

Photocatalytic oxygen reduction to produce hydrogen peroxide (H2O2) is a promising route to providing oxidants for various industrial applications. However, the lack of well‐designed photocatalysts for efficient overall H2O2 production in pure water has impeded ongoing research and practical thrusts. Here we present a cyanide‐based covalent organic framework (TBTN‐COFs) combining 2,4,6‐trimethylbenzene‐1,3,5‐tricarbonitrile (TBTN) and benzotrithiophene‐2,5,8‐tricarbaldehyde (BTT) building blocks with water‐affinity and charge‐separation. The ultrafast intramolecular electron transfer (<500 fs) and prolonged excited state lifetime (748 ps) can be realized by TBTN‐COF, resulting in a hole accumulated BTT and electron‐rich TBTN building block. Under one sun, the 11013 μmol h−1 g−1 yield rate of H2O2 can be achieved without any sacrificial agent, outperforming most previous reports. Furthermore, the DFT calculation and in situ DRIFTS spectrums suggesting a Yeager‐type absorption of *O2⋅− intermediate in the cyanide active site, which prohibits the formation of superoxide radical and revealing a favored H2O2 production pathway. [ABSTRACT FROM AUTHOR]

The prevailing view about molecular catalysts is that the central metal ion is responsible for the reaction mechanism and selectivity, whereas the ligands mainly affect the reaction kinetics. Here, we question this paradigm and show that ligands have a dramatic influence on the selectivity of the product. We show how even a seemingly small change in ligand isomerization sharply alters the selectivity of the well‐researched oxygen reduction reaction (ORR) Co phthalocyanine catalyst from an indirect 2e− to a direct 4e− pathway. Detailed analysis reveals that intramolecular hydrogen‐bond interactions in the ligand activate the catalytic Co, directing the oxygen binding and thus deciding the final product. The resulting catalyst is the first example of a Co‐based molecular catalyst catalyzing a direct 4e− ORR via ligand isomerization, for which it shows an activity close to the benchmark Pt in an actual H2−O2 fuel cell. The effect of the ligand isomerism is demonstrated with different central metal ions, thus highlighting the generalizability of the findings and their potential to open new possibilities in the design of molecular catalysts. [ABSTRACT FROM AUTHOR]

Developing cost‐effective and sustainable catalysts with exceptional activity and selectivity is essential for the practical implementation of on‐site H2O2 electrosynthesis, yet it remains a formidable challenge. Metal phosphide core–shell heterostructures anchored in carbon nanosheets (denoted as Ni@Ni2P/C NSs) are designed and synthesized via carbonization and phosphidation of the 2D Ni‐BDC precursor. This core–shell nanostructure provides more accessible active sites and enhanced durability, while the 2D carbon nanosheet substrate prevents heterostructure aggregation and facilitates mass transfer. Theoretical calculations further reveal that the Ni/Ni2P heterostructure‐induced optimization of geometric and electronic structures enables the favored adsorption of OOH* intermediate. All these features endow the Ni@Ni2P/C NSs with remarkable performance in 2e ORR for H2O2 synthesis, achieving a top yield rate of 95.6 mg L−1 h−1 with both selectivity and Faradaic efficiency exceeding 90% under a wide range of applied potentials. Furthermore, when utilized as the anode of an assembled gas diffusion electrode (GDE) device, the Ni@Ni2P/C NSs achieve in situ H2O2 production with excellent long‐term durability (>32 h). Evidently, this work provides a unique insight into the origin of 2e ORR and proposes optimization of H2O2 production through nano‐interface manipulation. [ABSTRACT FROM AUTHOR]

Constructing stable and efficient photocatalysts for H2O2 production is of great importance and is challenging. In this study, the synthesis of three photoactive cyclooctatetrathiophene (COTh)‐based porous aromatic frameworks (COTh‐PAFs) in an alternating donor‐acceptor (D−A) fashion is presented. In combination with a triazine‐derived electron acceptor, PAF‐363 exhibits high efficiency for the photosynthesis of H2O2 with production rates of 11733 μmol g−1 h−1(with sacrificial agent) and 3930 μmol g−1 h−1 (without sacrificial agent) from water and oxygen under visible light irradiation. Experimental results and theoretical calculations reveal that the charge transfer positions and the O2 adsorption sites in PAF‐363 are both concentrated on COTh fragments, which facilitate the H2O2 production through the oxygen reduction reaction (ORR) pathway. This work highlights that the rational design of COTh‐PAFs with consideration of D−A direction, charge transfer positions, and O2 adsorption sites provides a feasible access to efficient H2O2 production photocatalysts. [ABSTRACT FROM AUTHOR]

Constructing stable and efficient photocatalysts for H2O2 production is of great importance and is challenging. In this study, the synthesis of three photoactive cyclooctatetrathiophene (COTh)‐based porous aromatic frameworks (COTh‐PAFs) in an alternating donor‐acceptor (D−A) fashion is presented. In combination with a triazine‐derived electron acceptor, PAF‐363 exhibits high efficiency for the photosynthesis of H2O2 with production rates of 11733 μmol g−1 h−1(with sacrificial agent) and 3930 μmol g−1 h−1 (without sacrificial agent) from water and oxygen under visible light irradiation. Experimental results and theoretical calculations reveal that the charge transfer positions and the O2 adsorption sites in PAF‐363 are both concentrated on COTh fragments, which facilitate the H2O2 production through the oxygen reduction reaction (ORR) pathway. This work highlights that the rational design of COTh‐PAFs with consideration of D−A direction, charge transfer positions, and O2 adsorption sites provides a feasible access to efficient H2O2 production photocatalysts. [ABSTRACT FROM AUTHOR]

We report Cu, Fe, N‐doped carbon nanotubes, (Cu,Fe)−N−CNT, as electrocatalysts for the oxygen reduction reaction (ORR) in acidic media. (Cu,Fe)−N−CNT was prepared using a silica coating method in pyrolysis to minimize the formation of carbon‐coated metal oxide or carbide nanoparticles, which are known to be inactive for the H2O2 reduction. (Cu,Fe)−N−CNT shows a turnover frequency of 0.66 e− site−1 s−1 at +0.8 V vs. RHE and H2O2 yields of <1 % for the ORR with a utilization factor of active sites of 82 %. Kinetic analysis reveals that 4e− transfer rates for (Cu,Fe)−N−CNT are higher than those of a monometallic counterpart of Fe−N−CNT. In situ X‐ray absorption spectroscopy enables us to determine redox potentials: E°’(FeIII/FeII)=0.65 V vs. RHE and E°’(CuII/CuI)=0.45 V for (Cu,Fe)−N−CNT, and E°’(FeIII/FeII)=0.65 V for Fe−N−CNT. These results indicate that bimetallic doping into carbon nanotubes gives the effect on kinetic parameters but not on thermodynamic ones. In other words, there is no direct electronic interactions between the Cu and Fe active sites for (Cu,Fe)‐N‐CNT because such interactions should modulate their redox potentials. [ABSTRACT FROM AUTHOR]

The global energy crisis and growing concerns about environmental pollution have spurred researchers to explore eco‐friendly methods of generating clean energy. Previous studies have often relied on noble metal catalysts to facilitate oxygen reduction reactions (ORR) in energy production reactions. However, their high cost has limited their widespread adoption, making the development of highly active and affordable ORR catalysts a significant challenge. In this study, a vacuum heat treatment technique was employed to fabricate a cobalt‐loaded mesoporous graphene (Co−Gs) nanocomposite. The inclusion of cobalt in graphene enhances the reaction, while the presence of mesoporous graphene provides a larger surface area to accommodate the active sites of Co. This synergistic effect promotes the improvement of catalytic performance. Additionally, the stability and methanol tolerance of Co−Gs nanocomposites is also superior than that of Pt−C. The excellent catalytic performance of the Co−Gs nanocomposite is attributed to a four‐electron pathway within the nanocomposite, as demonstrated by electrocatalytic kinetics investigations. Additionally, the interface interaction between the Co nanoparticles and Gs enhances the efficiency of electron transfer, effectively improving the catalytic performance. These findings highlight the potential of Co‐loaded graphene nanocomposites as highly efficient and cost‐effective electrocatalysts for clean energy application. [ABSTRACT FROM AUTHOR]

Single‐atom catalysts (SACs) are widely studied in various chemical transformations due to their high catalytic activity and atom utilization. However, modulating the catalytic performance of catalysts by adjusting the microenvironment remains a great challenge. In this paper, a novel master‐double guest vulcanization‐assisted strategy is reported for synthesizing Fe single‐atom catalysts on N,S codoped porous hollow leaf carbon (FeSA/N,S‐PHLC) with highly exposed FeN3SOH sites. Fe(mIm) (guest I) is loaded on the surface of ZIF‐L (host) and then trithiocyanuric acid (TCA, guest II) is bonded with Fe(mIm), and the resulting ZIF‐L@Fe(mIm)@TCA precursors can be converted to FeSA/N,S‐PHLC with controllable structures. In addition, XPS analysis yield an increase in pyridine N content in FeSA/N,S‐PHLC compared to FeSA/N‐PHLC. It can be demonstrated by theoretical calculations that the N,S‐coordinated axially hydroxy‐coordinated asymmetric Fe centers synergistically with the abundance of pyridinic nitrogen facilitate the adsorption and desorption of oxygen intermediates, and the 3d orbitals of the Fe active centers can be optimized. The prepared FeSA/N,S‐PHLC catalyst has a half‐wave potential (E1/2) of 0.91 V under alkaline conditions, and E1/2 = 0.75 V under acidic conditions. It shows excellent cycle stability (882 h) and power density (217 mW cm−2) in the assembly of zinc–air battery (ZABs) devices. [ABSTRACT FROM AUTHOR]

Atomically dispersed iron–nitrogen–carbon catalysts are promised, low‐cost, and high‐performance electrocatalysts for the Oxygen Reduction Reaction (ORR) in fuel cells. However, most Fe–N–C materials are produced via pyrolysis at a high temperature and it is difficult to characterise the precise Fe–N configurations. This can lead to confusion surrounding the best chemical and coordination environment for Fe and understanding the subsequent ORR mechanisms. In this work, Fe porphyrin is used to produce a specific Fe–N environment, therefore allowing the role and activity of this environment to be studied. Carbon nanotubes (CNTs) are covalently functionalized with iron 5,10,15,20‐triphenylporphyrin (FeTPP) motifs via aryl diazonium methodology, enabling the exact role of only the Fe‐Pyrrolic N4 configuration of FeTPP in ORR to be studied and better understood. Upon covalent functionalization, a high electrochemical active site density of 1.12 × 1015 sites cm−2, approximately six‐fold more than that of noncovalently functionalized samples with 12.7% electrochemical active site. The heightened active site density and superior electrochemical active site utilization (12.7%) lead to the more favorable 4‐electron pathway for the ORR. Furthermore, a preliminary discussion regarding the selectivity of the ORR pathway is initiated. [ABSTRACT FROM AUTHOR]

The electrochemical desalination technique is recognized as a promising solution to alleviate freshwater shortages, challenges yet persists in achieving optimal energy efficiency and cost‐effectiveness. Herein, a hybrid acid/alkali zinc air desalination battery (hAA‐ZADB) capable of concurrent desalination and high‐power density is reported. To improve cathodic efficiency and cost‐effectiveness, an electrocatalyst with dual atomic Fe–Mn sites on porous dodecahedral carbon (Mn‐Fe/p‐DC) is fabricated through a simple direct pyrolysis strategy for oxygen reduction reaction (ORR). The Mn–Fe/p‐DC‐900 electrocatalyst demonstrates exceptional electrocatalytic activity (E1/2 = 0.8 V in 0.5 m H2SO4) for ORR. This innovative hybrid acid/alkali cell design, coupled with advanced electrocatalysts, empowers the hAA‐ZADB system to achieve outstanding performance benchmarks with a high open circuit voltage of 2.22 V, an impressive power density of 375 mW cm−2, and notably elevated energy output of 106.9 kJ mol−1 even at a current density of 100 mA cm−2 during desalination. Distinguishing this work is its additional functionality, evident in a rapid salt removal rate of 3.64 mg cm−2 min−1 during desalination, achieving an impressive 88.67% removal of 0.6 M NaCl. This study highlights the promising potential of employing metallic air batteries for a self‐powered desalination technique applicable to specific scenarios. [ABSTRACT FROM AUTHOR]

Atomically dispersed nonprecious metal‐based catalysts have been considered as the most promising alternatives to Pt‐based catalysts since their excellent catalytic activities and almost 100 % atom utilization in oxygen reduction reaction. However, the agglomeration of metal atoms is unavoidable during pyrolysis process, thus leads to the decrease of electrocatalytic performance. Herein, hyperbranched phthalocyanine copper (HCuPc) wrapping nano‐silica is synthesized via in situ polymerization and served as precursor for preparing atomically dispersed Cu−N−C electrocatalysts. Owing to the confinement effect of chemical‐anchoring and spatial‐hindrance, the migration and agglomeration of Cu atoms are restricted in carbonization process. The aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and X‐ray photoelectron spectroscopy (XPS) are performed to confirm the atomically dispersed of as‐synthesized catalyst, which is labelled as HCu−N−C/SiO2. In addition, the HCu−N−C/SiO2 possess superior ORR electrocatalytic activities with a half‐wave potential of 0.874 V vs RHE and a limiting current density of 5.7 mA cm−2. The zinc‐air batteries assembled with HCu−N−C/SiO2 catalyst exhibit a high specific capacity of 789 mAh g−1 as well as a maximum discharge power density of 176 mW cm−2. This work proves that hyperbranched phthalocyanine structure could be a useful confined framework to the fabrication of singles‐atom catalysts. [ABSTRACT FROM AUTHOR]

Designing an electrocatalyst with low Pt content is an immediate need for essential reactions in low temperature fuel cell systems. In the present work, La0.9925Ba0.0075Al0.995Pt0.005O3 is aimed at using with low (only 0.5%) Pt doping as an electrocatalyst for oxygen reduction reaction (ORR). The low doping level renders exsolution of 1–2 nm nanoparticles with uniform dispersion upon reduction in H2/N2 at low temperatures. Pt exsolved perovskite oxides deliver significantly enhanced catalytic activity for ORR and improved stability in alkaline media. This study demonstrates that LaAlO3 with low noble metal content holds immense potential as an electrocatalyst in real fuel cell systems. [ABSTRACT FROM AUTHOR]

Widely acknowledged that the capacity of Li‐O2 batteries (LOBs) should be strongly determined by growth behaviors of the discharge product of lithium peroxide (Li2O2) that follows both coexisting surface and solution pathways. However until now, it remains still challenging to achieve dynamic modulation on Li2O2 morphologies. Herein, the photo‐responsive Au nanoparticles (NPs) supported on reduced oxide graphene (Au/rGO) have been utilized as cathode to manipulate oxygen reduction reaction (ORR) kinetics by aid of surface plasmon resonance (SPR) effects. Thus, we can experimentally reveal the importance of matching ORR kinetics with Li+ migration towards battery performance. Moreover, it is found that Li+ concentration polarization caused "sudden death" of LOBs is supposed to be just a form of suspended animation that could timely recover under irradiation. This work provides us an in‐depth explanation on the working mechanism of LOBs from a kinetic perspective, offering valuable insights for the future battery design. [ABSTRACT FROM AUTHOR]

Oxygen reduction reaction (ORR) is the bottleneck of metal‐air batteries and fuel cells. Strain regulation can change the geometry and adjust the surface charge distribution of catalysts, which is a powerful strategy to optimize the ORR activity. The introduction of controlled strain to the material is still difficult to achieve. Herein, we present a temperature‐pressure‐induced strategy to achieve the controlled lattice strain for metal coordination polymers. Through the systematic study of the strain effect on ORR performance, the relationship between geometric and electronic effects is further understood and confirmed. The strained Co‐DABDT (DABDT=2,5‐diaminobenzene‐1,4‐dithiol) with 2 % lattice compression exhibits a superior half‐wave potential of 0.81 V. Theoretical analysis reveals that the lattice strain changes spin‐charge densities around S atoms for Co‐DABDT, and then regulates the hydrogen bond interaction with intermediates to promote the ORR catalytic process. This work helps to understand the catalytic mechanism from the atomic level. [ABSTRACT FROM AUTHOR]

Binding water molecules to polar sites in covalent organic frameworks (COFs) is inevitable, but the corresponding solvent effects in electrocatalytic process have been largely overlooked. Herein, we investigate the solvent effects on COFs for catalyzing the oxygen reduction reaction (ORR). Our designed COFs incorporated different kinds of nitrogen atoms (imine N, pyridine N, and phenazine N), enabling tunable interactions with water molecules. These interactions play a crucial role in modulating electronic states and altering the catalytic centers within the COFs. Among the synthesized COFs, the one with pyridine N atoms exhibits the highest activity, with characterized by a half‐wave potential of 0.78 V and a mass activity of 0.32 A mg−1, which surpass those from other metal‐free COFs. Theoretical calculations further reveal that the enhanced activity can be attributed to the stronger binding ability of *OOH intermediates to the carbon atoms adjacent to the pyridine N sites. This work sheds light on the significance of considering solvent effects on COFs in electrocatalytic systems, providing valuable insights into their design and optimization for improved performance. [ABSTRACT FROM AUTHOR]

Widely acknowledged that the capacity of Li‐O2 batteries (LOBs) should be strongly determined by growth behaviors of the discharge product of lithium peroxide (Li2O2) that follows both coexisting surface and solution pathways. However until now, it remains still challenging to achieve dynamic modulation on Li2O2 morphologies. Herein, the photo‐responsive Au nanoparticles (NPs) supported on reduced oxide graphene (Au/rGO) have been utilized as cathode to manipulate oxygen reduction reaction (ORR) kinetics by aid of surface plasmon resonance (SPR) effects. Thus, we can experimentally reveal the importance of matching ORR kinetics with Li+ migration towards battery performance. Moreover, it is found that Li+ concentration polarization caused "sudden death" of LOBs is supposed to be just a form of suspended animation that could timely recover under irradiation. This work provides us an in‐depth explanation on the working mechanism of LOBs from a kinetic perspective, offering valuable insights for the future battery design. [ABSTRACT FROM AUTHOR]

Oxygen reduction reaction (ORR) is the bottleneck of metal‐air batteries and fuel cells. Strain regulation can change the geometry and adjust the surface charge distribution of catalysts, which is a powerful strategy to optimize the ORR activity. The introduction of controlled strain to the material is still difficult to achieve. Herein, we present a temperature‐pressure‐induced strategy to achieve the controlled lattice strain for metal coordination polymers. Through the systematic study of the strain effect on ORR performance, the relationship between geometric and electronic effects is further understood and confirmed. The strained Co‐DABDT (DABDT=2,5‐diaminobenzene‐1,4‐dithiol) with 2 % lattice compression exhibits a superior half‐wave potential of 0.81 V. Theoretical analysis reveals that the lattice strain changes spin‐charge densities around S atoms for Co‐DABDT, and then regulates the hydrogen bond interaction with intermediates to promote the ORR catalytic process. This work helps to understand the catalytic mechanism from the atomic level. [ABSTRACT FROM AUTHOR]

Binding water molecules to polar sites in covalent organic frameworks (COFs) is inevitable, but the corresponding solvent effects in electrocatalytic process have been largely overlooked. Herein, we investigate the solvent effects on COFs for catalyzing the oxygen reduction reaction (ORR). Our designed COFs incorporated different kinds of nitrogen atoms (imine N, pyridine N, and phenazine N), enabling tunable interactions with water molecules. These interactions play a crucial role in modulating electronic states and altering the catalytic centers within the COFs. Among the synthesized COFs, the one with pyridine N atoms exhibits the highest activity, with characterized by a half‐wave potential of 0.78 V and a mass activity of 0.32 A mg−1, which surpass those from other metal‐free COFs. Theoretical calculations further reveal that the enhanced activity can be attributed to the stronger binding ability of *OOH intermediates to the carbon atoms adjacent to the pyridine N sites. This work sheds light on the significance of considering solvent effects on COFs in electrocatalytic systems, providing valuable insights into their design and optimization for improved performance. [ABSTRACT FROM AUTHOR]