Search

Nanotechnology has been widely applied to the fabrication of drug delivery systems in the past decades. Recently, with the progress made in microfabrication approaches, nanorobots are steadily becoming a promising means for tumor-targeting drug delivery. In general, nanorobots can be divided into two categories: nanomotors and stimuli-responsive nanorobots. Nanomotors are nanoscale systems with the ability to convert surrounding energies into mechanical motion, whereas stimuli-responsive nanorobots are featured with activatable capacity in response to various endogenous and exogenous stimulations. In this minireview, the dynamic control of nanomotors and the rational design of stimuli-responsive nanorobots are overviewed, with particular emphasis on their contribution to tumor-targeting therapy. Moreover, challenges and perspectives associated with the future development of nanorobots are presented.

A Cp*-Rh based D-shaped binuclear metallacycle and a template-free molecular Borromean ring (BR) were obtained in high yield using the semi-rigid thioether dipyridyl ligand 1,4-bis[(pyridin-4-ylthio)methyl]benzene (Bptmb). The topological transformation from a binuclear metallacycle and a BR to tetranuclear metallacycles was realized via the controlled oxidation of thioethers. The strategy used in this work can be regarded as a new form of stimuli-responsive post-synthesis modification (PSM).

The fluorescent functional material prepared by combining 16‐alkyl (ferrocenyl‐methyl) ammonium bromide (Fc16AB) and dye molecule Congo red (CR) via ionic self‐assembly strategy exhibits double stimuli‐responsive behavior triggered by redox and pH value. Both the fabrication and switching mechanism of aggregates are proposed according to the cooperative binding of noncovalent interactions, including π‐π stacking, electrostatic interactions, charge transfer interaction, and amphiphilic hydrophobic association. The optimal geometry and energy transfer between monomers and aggregate are studied by means of quantum chemistry calculation and wavefunction analysis, which provides a deep and theoretical understanding for formation mechanism of ionic self‐assemblies. Moreover, the fluorescent switching behavior of assemblies upon pH was studied in detail, which opens the new way for the construction of organic light‐emitting diode (OLED).

Epilepsy is a common but a complex neurological disorder with limited practices for successful management due to the complicated neuronal network and lack of knowledge of epileptic pathophysiology. Theranostic systems such as implantable devices and biodegradable nanomaterials offer better tailor‐made methods for the detection and treatment using nanotechnology‐based approaches for patients with epilepsy. Miniaturized nano‐implantable devices and biosensors equipped with operations to mimic neurostimulation demonstrate excellent opportunities in profiling the disease and assist in comprehension of the relationship between the disease and host. This strategy is developed for diagnoses and mapping brain activities to integrate and target therapeutic nanosystems in epilepsy. Non‐invasive class of nanotheranostics such as biodegradable and stimuli‐responsive polymers includes nanomaterials that utilize bio‐physico‐chemical processes or stimuli as a source for detecting the state and progress of the disease. The superior form of nanotheranostics encompasses in‐situ diagnostics with triggered release at the specific site. This review article focuses on the nanotheranostic strategies for epilepsy, their implications, challenges and new potentials for detection and therapy in personalized medicine. The concept of “on‐demand” release of drugs at the site of action using bio‐responsive theranostic approach reveals a potential for developing a point of primary care for epilepsy in the future.

DNA nanostructures have recently attracted increasing interest in biological and biomedical applications by virtue of their unique properties, such as structural programmability, multi-functionality, stimuli-responsive behaviors, and excellent biocompatibility. In particular, the intelligent responsiveness of smart DNA nanostructures to specific stimuli has facilitated their extensive development in the field of high-performance biosensing and controllable drug delivery. This minireview begins with different self-assembly strategies for the construction of various DNA nanostructures, followed by the introduction of a variety of stimuli-responsive functional DNA nanostructures for assembling metastable soft materials and for facilitating amplified biosensing. The recent achievements of smart DNA nanostructures for controllable drug delivery are highlighted. Finally, the current challenges and possible developments of this promising research are discussed in the fields of intelligent nanomedicine.

Recent innovations in genome editing have enabled the precise manipulation of the genetic information of mammalians, and benefitted the development of next-generation gene therapy. Despite these advances, several barriers to the clinical translation of genome editing remain, including the intracellular delivery of genome editing machinery, and the risk of off-target editing effect. Here, we review the recent advance of spatiotemporal delivery of CRISPR/Cas9 genome editing machinery, which is composed of programmable Cas9 nuclease and a single-guide RNA (sgRNA) using stimuli-responsive nanoparticles. We discuss the specific chemistries that have been used for controlled Cas9/sgRNA delivery and intracellular release in the presence of endogenous or external signals. These methodologies can leverage biological signals found locally within disease cells, or exogenous signals administrated with spatiotemporal control, through which an improved genome editing could be achieved. We also discuss the future in exploiting these approaches for fundamental biomedical applications and therapeutic genome editing.

This Review presents polysaccharides, oligosaccharides, nucleic acids, peptides, and proteins as functional stimuli-responsive polymer scaffolds that yield hydrogels with controlled stiffness. Different physical or chemical triggers can be used to structurally reconfigure the crosslinking units and control the stiffness of the hydrogels. The integration of stimuli-responsive supramolecular complexes and stimuli-responsive biomolecular units as crosslinkers leads to hybrid hydrogels undergoing reversible triggered transitions across different stiffness states. Different applications of stimuli-responsive biomolecule-based hydrogels are discussed. The assembly of stimuli-responsive biomolecule-based hydrogel films on surfaces and their applications are discussed. The coating of drug-loaded nanoparticles with stimuli-responsive hydrogels for controlled drug release is also presented.

This Minireview summarizes the recent progress of stimuli-responsive purely organic phosphorescence materials. Organic phosphorescence is closely related to the intermolecular interactions, because such interactions are beneficial to promote spin orbital coupling (SOC) and boost intersystem cross (ISC) efficiency and finally are conducive to satisfactory phosphorescence. It is found that the intermolecular interactions, which are essential for organic phosphorescence, are easily disturbed by external stimuli such as mechanical force, photon, acid, chemical vapor, leading to the luminescence change. According to this principle, various purely organic phosphorescence materials sensitive to external stimuli have been developed. This Minireview categorizes reported stimuli-responsive purely organic phosphorescence materials on the basis of different stimuli, including mechanochromism, mechanoluminescence, photoactivity, acid-responsiveness and other stimuli. Some prospective strategies for constructing stimuli-responsive purely organic phosphorescence molecules are provided.

A strategy is presented that enables the quantitative assembly of a heterobimetallic [PdPtL4 ]4+ cage. The presence of two different metal ions (PdII and PtII ) with differing labilities enables the cage to be opened and closed selectively at one end upon treatment with suitable stimuli. Combining an inert PtII tetrapyridylaldehyde complex with a suitably substituted pyridylamine and PdII ions led to the assembly of the cage. 1 H and DOSY NMR spectroscopy and ESI mass spectrometry data were consistent with the quantitative formation of the cage, and the heterobimetallic structure was confirmed using single-crystal X-ray crystallography. The structure of the host-guest adduct with a 2,6-diaminoanthraquinone guest molecule was determined. Addition of N,N'-dimethylaminopyridine (DMAP) resulted in the formation of the open-cage [PtL4 ]2+ compound and [Pd(DMAP)4 ]2+ complex. This process could then be reversed, with the reformation of the cage, upon addition of p-toluenesulfonic acid (TsOH).

Purely organic materials showing room temperature phosphorescence (RTP) and ultralong RTP (OURTP) have recently attracted much attention. However, it is challenging to integrate circularly polarized luminescence (CPL) into RTP/OURTP. Here, we show a strategy to realize CPL-active OURTP (CP-OURTP) by binding an achiral phosphor group directly to the chiral center of an ester chain. Engineering of this flexible chiral chain enables efficient chirality transfer to carbazole aggregates, resulting in strong CP-OURTP with a lifetime of over 0.6 s and dissymmetry factor of 2.3×10-3 after the conformation regulation upon photo-activation. The realized CP-OURTP is thus stable at room temperature but can be deactivated quickly at 50 °C to CP-RTP with high CPL stability during the photo-activation/thermal-deactivation cycles. Based on this extraordinary photo/thermal-responsive and highly reversible CP-OURTP/RTP, a CPL-featured lifetime-encrypted combinational logic device has been successfully established.

G-triplex (G3) structures formed with three consecutive G-tracts have recently been identified as a new emerging guanine-rich DNA fold. There could likely be a wide range of biological functions for G3s as occurring for G-quadruplex (G4) structures formed with four consecutive G-tracts. However, in comparison to the many reports on G4 nanoassemblies that organize monomers together in a controllable manner, G3-favored nanoassemblies have yet to be explored. In this work, we found that a natural alkaloid of sanguinarine can serve as a dynamic ligand glue to reversibly switch the dimeric nanoassemblies of the thrombin binding aptamer G3 (TBA-G3). The glue planarity was considered to be a crucial factor for realizing this switching. More importantly, external stimuli including pH, sulfite, O2 and H2 O2 can be employed as common regulators to easily modulate the glue's adhesivity for constructing and destructing the G3 nanoassemblies as a result of the ligand converting between isoforms. However, this assembly behavior does not occur with the counterpart TBA-G4. Our work demonstrates that higher-order G3 nanoassemblies can be reversibly operated by manipulating ligand adhesivity. This provides an alternative understanding of the unique behavior of guanine-rich sequences and focuses attention on the G3 fold since the nanoassembly event investigated herein might occur in living cells.

DNA origami nanotechnology has provided predictable static nanoarchitectures and dynamic nanodevices with rationally designed geometries, precise spatial addressability, and marked biocompatibility. Multiple functional elements, such as peptides, aptamers, nanoparticles, fluorescence probes, and proteins, etc. can be easily integrated into DNA origami templates with nanoscale precision, leading to a variety of promising applications. Triggered by chemical/physical stimuli, dynamic DNA origami nanodevices can switch between defined conformations or translocate autonomously, providing powerful tools for intelligent biosensing and drug delivery. In this minireview, we summarize the recent progress of dynamic DNA origami nanodevices with desired reconfigurability and feasibility to perform multiple biological tasks. We introduce varieties of DNA nanodevices that can be controlled by different molecular triggers and external stimuli. Subsequently, we highlight the recent advances in employing DNA nanodevices as biosensors and drug delivery vehicles. At last, future possibilities and perspectives are also discussed.

Herein, a novel class of high‐performing actuating oxides/hydroxides with turbostratic crystal structures is reviewed. These materials, including nickel hydroxide/oxyhydroxide, cobalt oxides/hydroxides, nickel‐doped cobalt oxides/hydroxides, and manganese oxides, exhibit a volume‐changing redox reaction, rendering them an electrochemical actuation behavior. Also, due to their turbostratic crystal structures, they typically exhibit light‐driven actuation due to water deintercalation from the crystal structure induced by light. Compared with other actuating materials, these oxides/hydroxides actuate with high stress and strain at fast rates, under very low stimuli requirements. Furthermore, they are easily printable on different substrates, thus allowing flexible robots with demodularized muscle‐skeletal designs to be made.

A new multi-sensor material based on helical copolymers showing the chiral conflict effect have been prepared. It can successfully detect and identify diverse metal cations in solution. The design of this material has taken into account not only the opposite helical senses induced by the two chiral monomers in the copolymer, but also their dynamic behavior. The induced helical sense can thus be enhanced, diminished, or inverted by interaction with different stimuli (that is, metal ions). Thus, depending on both the copolymer compositions (such as monomer ratios and absolute configurations) and the nature of the metal ion, the response of these dynamic helical copolymers to adopt a single-handed P or M helix is unique, making it possible not only to detect their presence, but also to identify them individually. New multi-sensors materials based and inspired on this effect should arise in the future choosing appropriate monomers and stimuli.

Stimuli-responsive materials have raised major attention in digital technology, sensors and biomedical applications owing to quick response towards external stimuli, for example light, voltage, pressure, temperature, mechanical friction and pH. Nevertheless, action of external stimuli on organic materials affects their internal physico-chemical properties and facilitates improved thermal/photo stability, tuning detection sensitivity, accuracy and biocompatibility. This review article highlights recent progress on stimuli-responsive materials with mixed valence species, viologens, twisting chirality, crystalline/amorphous, sol-gel phase transitions and resulting supramolecular nanostructures via non-covalent interactions. These materials can be applied in flexible electronics, drug delivery, detection of pollutants and bioimaging. Thus, the demand for widespread research on development of stimuli-responsive materials are requisite to resolve the challenges pertaining to stability and sensitivity of devices for design in comprehensive technology.

Biomimetic smart nanochannels have been studied extensively to achieve the precise ionic transport compared to biological ion channels. Similar to ion channels in living organisms, biomimetic smart nanochannels can respond to various stimuli, which allows for promising applications in many fields. In this review, we mainly summarize the recent advances in the design of biomimetic stimuli-responsive nanochannels and their potential applications including biosensors and drug delivery. Finally, an outlook on the challenges and opportunities for biomimetic stimuli-responsive nanochannels is provided.