Search

The core objective of current research was determined to nutritional and bioactive profile of maize bran (MB)‐enriched flour in relation to its end‐use product quality. Furthermore, rheological properties of MB‐enriched flour at different levels (5%, 10%, and 15%) were explicated through farinograph and mixograph. Moreover, bread was prepared with the addition of MB‐enriched flour and was characterized for nutritional and textural properties. Results showed that MB‐enriched flour having high water absorption and water retaining potential up to 4%–7% as compared to wheat flour (WF). Moreover, dough height gradually decreased with the addition of MB due to water‐binding ability of bran which causes a decrease in gas retention during fermentation. This resulted in bread volume decrease (4%–7%) as compared to WF. Furthermore, the moisture content and hardness increased with the addition of MB. The water activity of bread slightly increased with the addition of maize bran after 4‐day storage. Conclusively, MB‐enriched flour improved nutritional, textural, and sensorial properties of final product., Maize bran‐enriched flour is rich source of nutritional and bioactive components. Maize bran‐enriched flour bread has high dietary fibers than wheat flour bread. MB‐enriched flour bread explicated high score of sensorial overall acceptability.

Partially defatted coconut flour (PDCF) as a source of medium chain fatty acids was selected to replace fat in rusk formulation. Effect of replacement of wheat flour with PDCF (10%, 20% and 30%) on quality characteristics of rusk was studied. Increasing PDCF from 0% to 30% decreased farinograph water absorption, amylograph peak viscosity and overall quality score (52.5 to 19.5) of rusk. Use of additive mix, AM (4% dry gluten powder + 0.002% fungal α‐amylase) to 20% PDCF, increased the farinograph dough stability, strength of the paste during heating and overall quality score (39.5 to 50.5). The rusk with 20% PDCF + AM was stable up to 30 days, had 1.6, 5.5 times higher protein and dietary fibre contents as compared to control rusk respectively. The fat in the rusk had zero trans fatty acids and contained 66.2% medium chain fatty acids with lauric acid as a major fatty acid.

Wheat-related genomes may carry new glutenin genes with the potential for quality improvement of breadmaking. In this study, we estimated the gluten quality properties of the wheat line CNU609 derived from crossing between Chinese Spring (CS, Triticum aestivum L., 2n = 6x = 42, AABBDD) and the wheat Aegilops umbellulata (2n = 2x = 14, UU) 1U(1B) substitution line, and investigated the function of 1U-encoded low-molecular-weight glutenin subunits (LMW-GS).; Results: The main quality parameters of CNU609 were significantly improved due to introgression of the 1U genome, including dough development time, stability time, farinograph quality number, gluten index, loaf size and inner structure. Glutenin analysis showed that CNU609 and CS had the same high-molecular-weight glutenin subunit (HMW-GS) composition, but CNU609 carried eight specific 1U genome-encoded LMW-GS. The introgression of the 1U-encoded LMW-GS led to more and larger protein body formation in the CNU609 endosperm. Two new LMW-m type genes from the 1U genome, designated Glu-U3a and Glu-U3b, were cloned and characterized. Secondary structure prediction implied that both Glu-U3a and Glu-U3b encode subunits with high α-helix and β-strand content that could benefit the formation of superior gluten structure.; Conclusion: Our results indicate that the 1U genome has superior LMW-GS that can be used as new gene resources for wheat gluten quality improvement. © 2017 Society of Chemical Industry.; © 2017 Society of Chemical Industry.

Gluten aggregation behaviors of wheat flour were evaluated using a high-shear-based method with the GlutoPeak instrument and related to flour functional properties. GlutoPeak peak time (PT) and peak area (PA) were positively associated with gluten strength but negatively affected by farinograph absorption (FAB). GlutoPeak maximum torque (Tmax) was highly positively (P < 0.001) correlated with FAB regardless of gluten strength. PT and PA increased with the decrease of FAB. This could result in overestimation of gluten strength owing to water absorption. To account for the impact of FAB, a new parameter GlutoPeak strength index (GSI) was introduced for predicting gluten strength. GSI was obtained by multiplying Tmax and PA. This arithmetic product was found to provide greater correlation (r = 0.91) with dough strength than those of PA (r = 0.84) or PT (r = 0.57) based on the analysis of 56 advanced breeding lines with wide range of FAB. Moreover, significant relationships were found between GSI and flour mi...

The interrelationships between flour quality and the variability in the dough physical properties and bread loaf characteristics were investigated under reduced salt conditions using partial least squares (PLS) regression analysis. Seventy-two percent of the variability in dough physical properties was explained by the flour quality using a three-factor PLS model. Damaged starch content (DS), protein content, and farinograph dough development time (DDT) explained the variability of dough creep-recovery behavior along PLS-1. Farinograph absorption (FAB), located along PLS-2, was strongly related to dough adhesiveness, in which adhesiveness was highly correlated to dough stickiness (r = 0.91). Eighty-nine percent of the variability in bread loaf characteristics was explained by the flour quality using a four-factor PLS model; the first two PLS factors explained 66% of the variability. The loaf volume was related to a high number of loaf cells, whose expansion resulted in a greater loaf height. The relation ...

Blending wheat or flour to meet end-use requirements is a critical part of the production process to deliver consistent quality products. The functionality of commercial Canadian hard red wheat flour (HWF) and soft red wheat flour (SWF) blends with ratios of 100:0, 75:25, 50:50, 25:75, and 0:100 (HWF/SWF, w/w) was investigated with new and standard methods to discern which functional properties may be indicators of bread quality and processing performance. Rheological characteristics including farinograph water absorption behavior, dough development time (DT), stability, extensigraph extensibility, and gluten aggregation of wheat flours were significantly influenced by the proportion of HWF in blends of SWF and HWF (P < 0.05). The SWF content in the blends had negative linear relationships with the protein content, lactic acid solvent retention capacity, water absorption, and GlutoPeak peak torque. Polynomial relationships were observed for sodium dodecyl sulfate sedimentation volume, DT, stability, exten...

The major determinants of wheat quality are Glu-1 and Glu-3 glutenin loci and environmental factors. Additive effects of alleles at the Glu-1 and Glu-3 loci, as well as their interactions, were evaluated for dough rheology and baking properties in four groups of wheat doubled haploid lines differing in high- and low-molecular-weight glutenin composition.; Results: Flour quality, Reomixer (Reologica Instruments, Lund, Sweden), dough extension, Farinograph (Brabender GmbH, Duisburg, Germany) and baking parameters were determined. Groups of lines with the alleles Glu-A3b and Glu-B3d were characterized by higher values of dough and baking parameters compared to those with the Glu-A3e and Glu-B3a alleles. Effects of interactions between allelic variants at the Glu-1 and Glu-3 loci on Reomixer parameters, dough extension tests and baking parameters were significant, although additive effects of individual alleles were not always significant.; Conclusion: The allelic variants at Glu-B3 had a much greater effect on dough rheological parameters than the variants at Glu-A3 or Glu-D3 loci. The effect of allelic variations at the Glu-D3 loci on rheological parameters and bread-making quality was non-significant, whereas their interactions with a majority of alleles at the other Glu-1 × Glu-3 loci were significant. © 2017 Society of Chemical Industry.; © 2017 Society of Chemical Industry.

Thirty hard red spring (HRS) wheat cultivars released between 1910 and 2013 were analyzed to determine how they cluster in terms of parentage and HPLC analysis of gliadins and unreduced proteins. Markers for reduced height genes were assessed to determine associations between semidwarfism and protein composition, as well as quality characteristics. In terms of parentage, the clusters formed were grouped according to release year and semidwarfism. Farinograph development time and stability showed significant (P ≤ 0.05) differences between clusters, indicating improvement of mixing characteristics over time. Flour ash content was significantly different (P ≤ 0.05) between clusters, indicating improved milling quality. The clusters based on the gliadin reverse-phase HPLC peak binary data did not group cultivars according to release year and the semidwarf characteristic. However, cultivars were grouped according to year in the absorbance area based dendrogram. The clusters based on absorbance area of size-exclusion HPLC showed significant (P ≤ 0.05) differences for release year, the semidwarf characteristic, and farinograph stability. Overall, the results indicate that the introduction of reduced height genes accompanied the improvements of dough mixing and breadmaking quality characteristics, without altering the composition of gliadin proteins over the last 100 years of HRS wheat breeding.

In this research, the relationship between dough rheology and water behavior was investigated in response to two osmotic regulators, salt (NaCl) and polyethylene glycol (PEG), using two Canadian Western Red Spring (CWRS) wheat varieties (Harvest and Pembina). The effects of NaCl (0.5, 1.0, and 1.5 g/100 g of flour) and PEG 400 (2.5, 5.0, and 7.5 g/100 g of flour) on dough rheology (oscillatory and creep) were estimated by using a central composite design. Variation of NaCl showed a significant effect on the phase angle δ, indicating that increasing the NaCl resulted in a more elastic dough. The opposite trend was observed with the addition of PEG. PEG 400 exerted a softening effect owing to plasticization, so that a more compliant liquid-like dough was produced. The effects of water content (±10% of farinograph absorption) and PEG molar mass on dough rheology and freezable water content were estimated by using a full factorial design. PEGs with different molar mass (400, ≈1,600, and 3,350 g/mol) were adde...

Summary Apple pomace, after different processing procedures, was added into wheat flour in bread production to improve the dietary fibre content of breads. A fuzzy mathematical model was used in the sensory assessment of bread to improve the reliability of final conclusion. The addition of both apple pomace (AP) and skimmed apple pomace (SAP) reduced the extensibility and improved the resistance of wheat dough compared to the control sample. Wheat dough fortified with apple pomace of differing particle sizes did not have significant effects on either farinograph properties or extensograph properties. Sensory assessment of bread based on fuzzy mathematical model indicated that optimum concentration of apple pomace, both AP and SAP, added into wheat dough was 3%. Such results may be of importance when considering the use of apple pomace in bread production so as to enhance the dietary fibre intake, and also improve the sensory properties of bread.

The extensigraph is an internationally accepted method for measurement of physical properties of dough subjected to mechanical handling and resting. Standard extensigraph methods (AACC International Approved Method 54-10.01, ISO 5530-2) use the farinograph for the preparation of dough in the presence of 2% salt at reduced water absorption (farinograph absorption minus 2–3%). However, the dough so prepared is usually underdeveloped and drier than typically seen in common baking processes. In addition, the standard extensigraph test is time consuming and requires a large sample size. In this study, an alternate dough preparation protocol is proposed, consisting of a Swanson-type pin mixer at reduced salt (1%) and elevated water absorption (farinograph absorption plus 4%). With the alternate method, dough is fully developed and similar to bread dough in physical properties. AACCI Approved Method 54-10.01 is followed for dough rounding, molding, resting, and stretching by using the Brabender Extensograph-E in...

Bread flour was replaced with 5, 10, 15, 20, or 25% phosphorylated cross-linked RS4 resistant wheat starch and augmented with vital wheat gluten to maintain original flour protein content. Effect on dough and bread characteristics, total dietary fiber content, and consumer acceptability were evaluated. Mixograph water absorption was not affected by addition of 5, 10, and 15% RS4; however, a significant 2% increase in absorption occurred with 20 and 25% RS4 addition. Mixograph mix time was increased by 15 s with the addition of 5, 10, and 15% RS4, by 30 s with 20% added RS4, and by 45 s with 25% added RS4. There was not a difference in farinograph absorption of doughs containing all levels of added RS4. Farinograph mixing time increased as addition level increased up to 15% and then decreased at higher addition levels. In general, dough strength and extensibility were not affected by RS4 addition. Levels of added RS4 up to 20% did not affect bread volume. Loaves with 15, 20, and 25% added RS4 contained suf...

Whole oat flour (WOF) is known for high β-glucan and antioxidant content. The main purpose of this study was to replace white wheat flour with WOF at different levels of 0, 10, 20 and 30% in production of bread using part-baking technology. Dough properties (using farinograph) and physical characteristics of full-baked breads stored for 1 h and 72 h at 20C were studied. Increases in water absorption, dough development time and dough softening, while a reduction in dough stability time with addition of WOF were obsereved. The specific volume of fresh breads containing WOF reduced further after storage. The crumb hardness, chewiness, elasticity and cohesiveness reduced and crust color became lighter with addition of WOF and storage time. The effects of bread storage were more obvious for samples containing WOF. The bread containing 10% WOF received the highest sensory scores and had similar sensory characteristics to the control. Practical Applications Costumer demand for breads with health benefits and superior sensory properties is increasing rapidly. This study showed the effects of substitution white wheat flour with whole oat flour (WOF) which is well-known for its health benefits owing to considerable amount of β-glucan and antioxidants. The results of this study are applicable in bakery industry and specifically in production of bread using part-baked technology and can be useful for the producers of functional and healthy products. Some of the effects of flour replacement with 0, 10, 20 and 30% WOF were undesirable and had negative effects on sensory attibutes of the full-baked breads. The adverse effects of storage (72 h at ambient temparature) were more obvious for breads containing WOF. However, inclusion of 10% WOF resulted in a bread with similar sensory properties to the control and hence it can be used succesfully for production of a healthier part-baked bread.

Expanding the range of bakery products in terms of producing supplemented or dietetic products has been an increasingly important trend in contemporary baking. Value added products, especially products rich in fiber and phytochemicals are getting popular. Among the dry fruits used for filling, Figs were rich in ash and protein and Dates were rich in dietary fiber. Gallic acid was the dominant free phenolic acid in Fig whereas chlorogenic acid and procatechuic acid were dominant in Dates in the bound form. Farinograph water absorption, dough development time, maximum pressure (P), and extensibility (L) decreased on increase in the replacement of wheat flour with chiku powder from 0 to 30%. The dry fruit fillings in the pH range of 3.3–3.5 with 75–808Bx showed better bake stability with respect to spreadability and breaking strength. Biscuits topped with higher 8Bx fillings had higher breaking strength values even during storage. Among the gelling agents used, addition of sodium alginate stabilized and further improved the bake stability of the fillings. The chiku incorporated biscuits sandwiched with fruit filling were rich in dietary fiber. Also significant amounts of gallic acid and chlorogenic acid in free and bound form were present in the biscuit. Practical applications Bakery products can act as a vehicle for supplementation of vitamins, minerals, protein, dietary fiber, and so on, to prevent nutritive deficiencies. Among the bakery products, biscuits are shelf stable and have better consumer acceptability by all age groups. To incorporate fruits which are rich in many bioactive principles, and to add on to variety, fruit sandwiched biscuits with fruit powder in the casing too. Fillings mainly from dry fruits were prepared at varying degree brix and with different gelling agents. Biscuit sheets containing chiku powder in the formulation was topped with the fillings and looked for the bake stability with respect to texture and spreadability. Addition of fruit powder in the shells and fruit filling in between helped to increase the nutritional characteristics of the product.

Gluten aggregation properties were investigated by means of the GlutoPeak device, a viscometer recently proposed as a rapid and sensitive test for measurement of wheat flour technological performance. In this study, 62 soft wheat flour samples of different quality and end use were utilized to evaluate if the GlutoPeak parameters could adequately predict chemical and rheological characteristics of soft wheat flour dough, that is, protein content measured by the Kjeldahl method, dough strength measured by a Chopin alveograph, and dough stability and water absorption measured by a Brabender farinograph. Linear correlation analysis showed that most GlutoPeak curve parameters were strongly correlated with protein content, dough strength, and water absorption. The statistical models, obtained by a stepwise multiple regression method, showed the GlutoPeak device to be a promising tool to characterize wheat flour (Radj2 = 0.84 for protein content, Radj2 = 0.71 for dough strength, and Radj2 = 0.67 for water absorp...

In our study, we evaluated the substitution effect of 5, 10 and 15% of the wheat flour by alhydwan flour on dough rheology, texture profile analysis, bread volume, color, sensory evaluation and bread quality. The farinograph characteristics of the alhydwan containing doughs portrayed higher water absorption, while development and stability time was greatly reduced. In addition, there was a remarkable reduction of the degree of softening of the dough at 5% supplementation of the alhydwan flour. Extensograph measurements clearly demonstrated increased dough resistance and the ratio of resistance to extension and extensibility (R/E) and a reduction in extensibility and energy value after the supplementation of alhydwan flour. Texture analysis attested to the enhanced springiness and cohesiveness of the alhydwan enriched bread while chewiness, gumminess, adhesiveness and hardness decreased. The highest score in the sensory evaluation was recorded at 10% supplementation of the alhydwan flour. Practical Applications Our results indicated that alhydwan flour it is could be incorporated into bread to improvement in dough rheology, bread quality and could be used act as improver to extend the shelf life for few hours and consequently reduce the economic loss caused by bread staling.

Pasta products enriched with ingredients to improve their nutritional value or functionality have become increasingly popular, and substantial research efforts have been directed towards the development of new enriched pasta products. In this work, a meta-analysis was conducted to quantify the impact of enrichment and process specifications on the quality attributes of pasta. A literature search revealed 66 studies on enriched pasta. Process specifications and quality attributes, namely proximate composition, dough, drying, cooking, and mechanical properties, color, and sensory attributes, were extracted from the studies and compiled in a data set. Analysis of the data set revealed significant differences between pasta enriched with high-fiber ingredients and pasta enriched with pulse flour. High-fiber ingredients generally preserved the quality attributes of pasta more effectively than pulse flour. Comparisons based on the drying temperature showed that high drying temperatures generally improve the cooking properties of enriched pasta. Sensory evaluations indicated that enrichment levels below 10% generally do not affect consumer acceptance, but higher enrichment levels significantly decrease it. Pearson correlation coefficients showed that the gelatinization temperature and Farinograph properties are useful indicators of the mechanical properties and sensory attributes of pasta. The meta-analysis revealed the need to better understand the impact of the processing history of the enrichment ingredient on the quality attributes and the health benefits of enriched pasta.

BACKGROUND Most studies on dough properties are performed on yeastless dough to exclude the complicating, time-dependent effect of yeast. Baker's yeast, however, impacts dough matrix properties during fermentation, probably through the production of primary (CO2 and ethanol) and secondary (glycerol, acetic acid and succinic acid) metabolites. The aim of this study is to obtain a better understanding of the changes in yeasted dough behavior introduced by fermentation, by investigating the impact of yeast fermentation on Farinograph dough consistency, dough spread, Kieffer rig dough extensibility and gluten agglomeration behavior in a fermented dough-batter gluten starch separation system. RESULTS Results show that fermentation leads to a dough with less flow and lower extensibility that breaks more easily under stress and strain. The dough showed less elastic and more plastic deformation behavior. Gluten agglomerates were smaller for yeasted dough than for the unyeasted control. CONCLUSION These changes probably have to be attributed to metabolites generated during fermentation. Indeed, organic acids and also ethanol in concentrations produced by yeast were previously shown to have similar effects in yeastless dough. These findings imply the high importance of yeast fermentation metabolites on dough matrix properties in industrial bread production. © 2015 Society of Chemical Industry

The rheological (Pasting, farinograph, and alveograph) properties of wheat flour (WF) replaced with breadfruit four (05–40%) was analyzed. Baking and sensory qualities of the resulting bread were evaluated. Differences in baking properties of loaves produced under laboratory and industrial conditions were analyzed with t‐test, whereas ANOVA was used for other analyses. Peak and final viscosities in the composite blends (CB) ranged from 109.20 to 114.06 RVU and 111.86 to 134.40 RVU, respectively. Dough stability decreased from 9.15 to 0.78 min, whereas farinograph water absorption increased 59.7–65.9%. Alveograph curve configuration ratio increased from 1.27 to 7.39, whereas specific volume (Spv) of the loaves decreased from 2.96 to 1.32 cm3/g. The Spv of WF loaves were not significantly different (P > 0.05) from that of the 5% CB, whereas production conditions had no significant effects on absorbed water (t = 0.532, df = 18 P = 0.3005), weight loss during baking (t = 0.865, df = 18, P = 0.199), and Spv (t = 0.828, df = 14.17, P = 0.211). The sensory qualities of the 5% blend were not significantly different from the WF.

Canadian Western Red Spring (CWRS) market class is the predominant type of wheat (Triticum aestivum L.) grown in Canada since the turn of the 20th century. Wheat cultivars ranging from cv. Red Fife to cv. Superb were field tested in a series of 24 replicated trials spanning 19 years in central Saskatchewan, Canada. The objective of this study was to measure the rate of cultivar improvement in light of relatively narrow end-use quality definitions for the CWRS market class. Regression of cultivar trait means on year of cultivar registration was used to assess the rate of change in yield, productivity traits, and end-use quality parameters. Yield levels were estimated to be increasing at a rate of approximately 15 kg/ha per year in 1970 and 23 kg/ha per year in 1995. Days to spike emergence and plant height decreased over time. Kernel weight, grain protein concentration, SDS sedimentation volume, farinograph absorption, and dough development time increased over time, whereas farinograph mixing tolerance ind...

The effects of Cephalaria syriaca flour on the quality of sunn pest-damaged wheat were investigated. Sunn pest-damaged wheat was blended into sound wheat at different levels (5, 10 and 15%). C. syriaca flour was then added at 0.5, 1.0 and 1.5% levels. The rheological properties of sunn pest-damaged wheat flour with added C. syriaca flour were considerably improved, in particular with regard to farinograph characteristics (dough stability, mixing tolerance index [MTI] and degree of softening [DS]) and instrumental textural properties (area and maximum resistance) compared to control. The dough stability value increased significantly (P

Soy protein isolate (SPI) was hydrolyzed and then its hydrolysate (Hyd-SPI) was supplemented to dough. The dough fermented by a starter consisting of Lactobacillus paralimentarius 412 and Anqi's yeast was applied to manufacture Chinese steamed bread. Addition of 1% Hyd-SPI to dough is found to significantly improve the farinograph and extensograph values. Moreover, 1% Hyd-SPI stimulates the growth and metabolism of the starter culture better compared with the control and thus improves the sourdough fermentation. The sourdough supplemented with 1% Hyd-SPI observed by scanning electron microscopy contains starch granules that are largely hydrolyzed. Additionally, the sourdough has more free amino acids than the control. A total of 45 volatile compounds are recognized in the Chinese steamed breads containing 1% Hyd-SPI. This is the first report that SPI hydrolysate is used to improve the quality of Chinese steamed bread products. Practical Applications Chinese steamed bread, as a traditional grain product that is made with sourdough, has been widely consumed in Northern China and many Southeastern Asian countries for its taste and rich nutrition. The better the performance of the sourdough, the better the quality of the Chinese steamed bread. This study uses a hydrolyzed soy protein isolate (Hyd-SPI) as an external supplement to enhance the fermentation performance and rheological properties of sourdough. Currently, this technique has been extended to local producers for the manufacture of the sourdough-based steamed bread.

Summary The reduction of sodium in breads is already an imposed reality, which makes the search for alternatives essential. As sodium chloride has an effect on dough rheology, affecting the production process, it is important to evaluate these properties. This study evaluated the use of dry sourdough for the reduction of sodium in wheat flour dough. Sodium chloride (0–2.5 g/100 g) and dry sourdough (0–10 g/100 g) were added to wheat flour according to a central composite rotatable design, and farinograph, extensograph and pasting parameters were evaluated. The results were analysed using the response surface methodology. The farinograph and extensograph properties were strongly affected by both variables and presented opposite behaviours for most parameters. For pasting properties, only maximum viscosity and breakdown were affected. Despite the antagonistic behaviour of the variables when analysed separately, suitable parameters were reached in intermediate ranges for the manufacture of bakery products with reduced sodium content.

This research aims to investigate the relationship between the solvent retention capacity (SRC) test and quality assessment of hard red spring (HRS) wheat flour samples obtained from 10 HRS cultivars grown at six locations in North Dakota. The SRC values were significantly (P < 0.05) correlated with flour chemical components (protein, gluten, starch, and damaged starch contents, except arabinoxylan); with farinograph parameters (stability [FST], water absorption, peak time [FPT], and quality number); and with breadmaking parameters (baking water absorption [BWA], bread loaf volume [BLV], and symmetry). Differences in locations and cultivars contributed significantly to variation in quality parameters and SRC values. Suitability of SRC parameters for discriminatory analysis of HRS wheat flour is greatly influenced by molecular weight distribution (MWD) of SDS-unextractable proteins. SRC parameters, except for sucrose SRC, showed significant (P < 0.01) and positive correlations with high-molecular-weight (H...

The influence of tragacanth and salep gums on the rheological characteristics of dough and the quality of flat bread made from frozen dough was investigated. Dough was prepared with gums at two levels (0.5, 1%). Farinograph and extensograph tests were carried out on dough samples. Dough was frozen at −30C and stored at −18C. At the first and third weeks of storage, the samples were defrosted and the bread was baked. After sensory evaluation, the samples were stored for 1–5 days to conduct staling tests. The water absorption of the samples containing gums was significantly higher than that for the control. There was a significant difference in dough stability between the control and the samples containing tragacanth. The data also showed significant differences in extensograph parameters. Treatment with gums improved the bread's sensory properties, including firmness and chewiness. This study's results reveal that gums, particularly tragacanth, may improve the rheological characteristics of dough and final product quality. Practical Applications Freezing technology in the bread-making industry is used to preserve dough pieces and partially baked and baked bakery products. However, the quality of the resulting bread is not the same as that produced with fresh dough. Functional ingredients may be added to produce a bread with quality that is close to that produced from fresh dough. This study examined the effect of two functional ingredients – salep and tragacanth – on the quality of dough and bread.

This study evaluated the influence of calcium and magnesium ions on the empirical rheological properties of wheat flour to verify possible effects of these ions on processing because, in addition to their nutritional importance, they are also responsible for water hardness. Calcium (0–1.30 g/100 g) and magnesium (0–0.34 g/100 g) ions from sulfate salts were added to wheat flour, according to a central composite rotatable design. The farinograph and extensigraph properties of wheat flour and its mixtures were evaluated. The results were analyzed by response surface methodology. Calcium ions stood out for increasing water absorption, decreasing mixing stability, and producing a delayed effect on dough extensibility (reduced at 135 min). Magnesium ions influenced most flour rheological properties in a similar manner to oxidizing agents (increased dough stability, increased resistance to extension, and reduced extensibility), thus proving to be a possible replacement agent for these additives. An interaction ...

The Rheo Extrusion Meter (REM) measures the time for vertical upward extrusion of wheat flour dough (subsequently referred to as extrusion time, ET) as a measure of its consistency. ET evidently increases with dough consistency. ETs are highly reproducible and sensitive to differences in dough moisture content. A single REM analysis takes 20 min, and the measured ET can be converted into the correct baking absorption at a given temperature. The heights of the extruded dough pieces are negatively correlated with straight-dough bread loaf specific volume, both when comparing different flour samples and when adjusting moisture content of dough prepared from a given flour sample. The REM also allows determination of the consistency of complex wheat flour based systems and the impact of vital wheat gluten or ascorbic acid thereupon. Furthermore, in contrast to the farinograph, it detects the impact of endoxylanases hydrolyzing water-extractable arabinoxylan on dough consistency.

Five different soybean protein sources were added to wheat flour to increase the protein content by 15–25%, and the resulting composite flours were optimally processed into hot-press tortillas in a pilot plant. The rheological properties of composite flours were evaluated with the farinograph, alveograph, and other wheat quality tests. Tortilla-making qualities of the control and soybean-fortified flours were evaluated during dough handling, hot pressing, and baking. The resulting tortillas were tested in terms of yield, physical and chemical parameters, sensory properties, color, and objective and subjective texture. The soybean-fortified tortillas had increased yields because of the higher dough water absorption and enhanced essential amino acid scores. Among the five different soybean proteins, the defatted soybean flour (SBM1) with the lowest fat absorption index and protein dispersibility index (PDI) and the soybean concentrate produced the best fortified tortillas. The protein meals with hi...

BACKGROUND Climate changes do not only affect wheat yield, but also its quality. The information on this topic gathered so far is somewhat contradictory and insufficient. Climate changes are also affecting wheat indirectly through their influence on the ecosystem, including insects and fungi that affect the wheat technological quality. The aim of this study has been to examine trends in structural and technological changes of wheat quality under conditions typical of climate changes. With this in mind, three groups of wheat varieties with the same Glu-score were examined in three production years, characterized by different production conditions. RESULTS Production season which is characterized by climate change conditions, results in lower activity of amylolitic enzymes. What is more, it results in lower content of gluten, higher gluten index value, its decrease after 1h to 37 °C, lower number of free SH groups and higher content of free amino groups that result in lower alwegraph W, lower farinograph WA and higher extensograph dough resistance. CONCLUSION Variability in wheat quality produced under different climatic conditions is mainly influenced by the production conditions, including their influence on ecosystem factors. The influence of wheat cultivar genetic predisposition is much less expressed. This indicates that differences among cultivars with different Glu-score might be diminished under the influence of altered production conditions, as a consequence of climate change.

A multigrain semolina blend (MSB) was prepared by combining mixture of soya (Glycine max) semolina (SS), chickpea split (Cicer arietinum) semolina (CS) and barley (Hordeum vulgare) semolina (BS) – (SSCSBS) with durum wheat semolina. The effect of the incorporation of SSCSBS at 25, 50, 75 and 100% level on the quality characteristics of MSB for upma (without seasoning) was studied. The use of the increasing amount of SSCSBS in MSB increased the farinograph water absorption up to 50% level, but decreased at higher levels of SSCSBS; increased the amylograph pasting temperature; and decreased the peak viscosity. The use of SSCSBS decreased the hardness and springiness but increased the cohesiveness, gumminess and chewiness values of cooked MSB. The overall quality of MSB up to 50% SSCSBS level was acceptable. The nutritional characteristics of MSB with 50% SSCSBS showed that the protein, dietary fiber and resistant starch contents and percentage protein digestibility increased and starch digestibility decreased when compared to control. PRACTICAL APPLICATIONS Use of multigrain to enrich the nutritional quality of products is increasing. The beneficial effects of multigrain in upma making have not yet been explored. This paper discusses the effect of partial replacement of durum semolina with mixture of semolina blend of soya, barley and chickpea on the quality characteristics of upma without seasoning. This information may be useful for the food industry to manufacture nutritious multigrain upma in large scale.

Starch is a crucial component determining the processing quality of wheat-based products such as Chinese steamed bread (CSB) and raw white noodles (RWN). Flour from wheat cultivar Zhongmai 175 was used for fractionation into starch, gluten, and water solubles by hand washing. The starch fraction was successfully separated into large (>10 μm diameter) and small starch granules (

This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle-making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than sta...

Summary The research was conducted with the aim to investigate the possibility of Farinograph, Extensograph and Amylograph values prediction with linear and/or multiple Mixolab regression models. In total, 163 flour samples were divided based on Machalanobis distances into three sets: prediction, validation and external sample set. Determination coefficients ranged from 0.145 to 0.640 for linear regression models and from 0.279 to 0.739 for multiple regression models. Internal and external validation of developed regression models was conducted. Testing of developed models resulted in a high share of samples for which predicted values were out of the ranges of method official reproducibility and a high share of samples for which predicted values were out of the quality level range obtained by analytical measurement. It was concluded that it is impossible to develop applicable regression models for prediction of Farinograph, Extensograph and Amylograph parameters on the basis of Mixolab values from standard protocol.

Glutenins, which form the network of gluten protein, are of great importance for the quality of flour products. Glutenins can be divided into HMW and LMW subunits according to molecular weight. Three genes for LMW glutenin subunits (LMW-GS), named lmw-cnd1, lmw-cnd2, and lmw-cnd3 with open reading frames of 1,053, 903, and 969 bp, respectively, were cloned from wheat cultivar Cheyenne. Heterologous expression vectors of the three LMW-GS were constructed, and the recombinant proteins LMW-CND1, LMW-CND2, and LMW-CND3 were overexpressed in Escherichia coli. After cell disruption with ultrasound, target proteins of high purity were obtained by using Ni2+ affinity chromatography. Farinograph and TAPlus measurements were used to investigate the effects of the three LMW-GS on the characteristics of flour and dough. The results showed that the addition of each LMW-GS can lead to an increase in the elasticity of the dough. Moreover, LMW-CND2 and LMW-CND3 promoted the strength of the dough. All three LMW-G...

The impact of NaCl reduction and replacement by CaCl2 : CaCO3 (50:50) on dough and bread characteristics is addressed in this study. Three recipes of white bread were formulated with different percentage of NaCl substitution; all doughs had 1.8 g of total salts added per 100 g flour weight basis. Comparison was performed against control bread containing 1.8 g of NaCl per 100 g flour weight basis. Alveograph and farinograph results indicated that addition of calcium decreased dough extensibility, stretchability and stability time, keeping strong flour characteristics. Calcium salts increased hardness of upper crust and decreased hardness of lower crust. An increase of calcium salts promoted lighter crumb and crust color. Descriptive sensory analysis indicated that 16 out of 25 traits showed significant differences between control and recipes. Principal component analysis using variables such as texture, color and sensory traits indicated that breads produced with 50% NaCl substitution were comparable with the control. Practical Applications The current interest in promoting a healthy diet encourages the design of foods that prevent diseases and cover specific nutritional requirements. Thus, reduction of salt intake and the fortification with beneficial minerals such as calcium is pertinent, as bread constitutes an important source of salt intake and its calcium contribution is low. The results show that it is possible to maintain the organoleptic characteristics and acceptability of the bread with reduced sodium content and 50% replacement by calcium salts. Estimating bread serving of 50 g, the calcium-fortified bread with 50% sodium reduction could cover 13.5 and 17.6% of the calcium recommended daily intake for schoolchildren and adults with added beneficial effect on health, due to salt reduction. The purposed change in the sodium–calcium content has a dual beneficial effect on the health of the population, prevents problems related to high salt intake and helps to resolve calcium deficiency.

Refined wheat flours commercially produced by five different U.S. and Mexican wheat blends intended for tortilla production were tested for quality and then processed into tortillas through the hot-press forming procedure. Tortilla-making qualities of the flour samples were evaluated during dough handling, hot pressing, baking, and the first five days on the shelf at room temperature. The predominant variables that affected the flour tortilla performance were wet gluten content, alveograph W (220–303) and P/L (0.70–0.94) parameters, farinograph water absorption (57%) and stability (10.8–18.7 min), starch damage (5.43–6.71%), and size distribution curves (uniform particle distribution). Flours produced from a blend of Dark Northern Spring (80%) and Mexican Rayon (20%) wheat had the highest water absorption, and tortillas obtained from this blend showed the highest diameter and lowest thickness. The whitest and best textured tortillas were obtained from the flour milled from three hard types of Mex...

Physicochemical properties and protein composition of 39 selected wheat flour samples were evaluated and correlated with the textural properties of Chinese hard-bite white salted noodles. Flour samples were analyzed for their protein and wet gluten contents, sedimentation volume, starch pasting properties, and dough mixing properties by farinograph and extensigraph. Molecular weight distribution of wheat flour proteins was determined with size-exclusion (SE) HPLC, SDS-PAGE, and acid-PAGE. Textural properties of Chinese hard-bite white salted noodles were determined through texture profile analysis (TPA). Hardness, springiness, gumminess, and chewiness of cooked noodles were found to be related to the dough mixing properties. Both protein content and protein composition were found to be related to TPA parameters of noodles. The amount of total flour protein was positively correlated to hardness, gumminess, and chewiness of noodles. The absolute amounts of different peak proteins obtained from SE-H...

Keeping in view the present day demand for foods with healthy fats, the effect of different fats namely hydrogenated fat (HF) and bakery fat (BF); oils—sunflower oil (SFO), soyabean oil (SBO), olive oil (OLO), palm oil (POO) and coconut oil (CNO) separately at the level of 7.5 % on the rheological, fatty acid profile and quality characteristics of parotta was studied. Addition of fats and oils decreased Farinograph water absorption, Amylograph peak viscosity, Alveograph resistance of dough to deformation and increased average abscissa at rupture. In the micrographs of parotta dough with fats, the protein matrix appeared thick and intact, whereas in the case of parotta dough with oils the protein matrix appeared slightly less intact. The spread ratio and overall quality of parotta with oils were higher than fats. The highest overall quality score was observed for parotta with OLO, followed in decreasing order by SFO, SBO, CNO, POO, HF and BF. Determination of fatty acid profile showed that the parottas with fats contained a high amount of trans fatty acids (TFA), while parottas with oils had no TFA. During storage up to 48 h, the parottas with oils remained softer than the parottas with fats.

Summary The bread-making potential of flour may be roughly estimated by dough rheology, especially its tolerance to over-mixing as determined with the farinograph. The objective of this study was to identify the relative effects of experimental conditions likely to affect dough mixing stability: mixer speed, temperature, salt, yeast and bread additives such as ascorbic acid and preservatives. The addition of 1–2% salt or ascorbic acid (50 mg kg−1 flour) improved dough mixing stability and counteracted the negative effect of bread preservatives. Mixing salted dough at slow speed (63 rpm) and 25 °C might be a more realistic bread-making procedure for performing dough rheology assays with equipment such as the farinograph, compared to official methods (only flour and water, no salt; 30 °C). Amongst five bread wheat cultivars, differences existed in dough strengthening response to both salt and ascorbic acid, a property that may find application in wheat breeding and screening.

Dough strength is needed for efficient breadmaking quality. This property is strongly influenced in wheat (Triticum aestivum L.) by gluten seed storage proteins and, in particular, by high-molecular-weight (HMW) glutenin subunit composition. Experiments were designed to elevate expression of a key native HMW glutenin subunit (1Dy10) via genetic engineering and to determine whether resultant flours can be used in sponge and dough applications, the most common commercial bread-baking procedure. Both unblended and blended samples from transgenic and nontransgenic sister lines were tested, with blended samples being formed by addition to a control sample. Dough properties, as determined by farinograph evaluation, were improved by the transgene-encoded increases in 1Dy10 in both undiluted and blended flours. Mean farinograph stability of transgenic samples was twice that of the control, and blends with transgenic samples demonstrated increases in stabilities proportional to the amount of transgenic fl...

Summary Dough formation process is a relevant step in cereal goods manufacturing, as in this stage the material develops its mechanical properties. Dough structure formation is promoted by mechanical energy transfer from the mixer blades to the sample, affecting flour hydration and gluten network formation kinetics. This paper reports a model of dough formation process during a farinograph test, accounting for all relevant physical phenomena: wheat particles hydration, gluten network formation, evolution and (eventually) disruption as effect of mixing energy. Results of the model are in terms of network strength and connectivity evolution, and a qualitative agreement was found with typical farinograph results. This allowed to employ the model to study the effect of the flour's physical properties on the empirically defined (but employed as industrial standards) farinograph outputs. Therefore, simulation results allowed to gain a physical insight of the technological parameters from a farinograph test.

The relationship of solvent retention capacity (SRC) values with four solvents, alveograph and farinograph properties, and cookie-baking performance was evaluated with 20 Chinese soft wheat genotypes, including four cultivars and 16 advanced lines grown in the 2009–2010 season. Significant positive correlations were observed between water SRC (WSRC), sodium carbonate SRC (SOSRC), lactic acid SRC, and sucrose SRC (SUSRC) values. WSRC, SUSRC, and SOSRC showed significant positive correlations with farinograph water absorption (WA), alveograph P (tenacity), and P/L (ratio of tenacity to extensibility). Cookie diameter was significantly correlated with wet gluten (r = –0.491, P < 0.05), WSRC (r = –0.882, P < 0.001), SUSRC (r = –0.620, P < 0.01), SOSRC (r = –0.712, P < 0.001), P (r = –0.787, P < 0.001), L (r = 0.616, P < 0.01), P/L (r = –0.766, P < 0.001) and WA (r = –0.620, P < 0.01), respectively. SRC values were effective predictors of cookie quality in Chinese soft wheat. Alveograph parameters wer...

Summary The best rheological test to differentiate dough and gluten strength and predict cooking quality of different durum wheat cultivars is not recognised yet. Sixteen durum wheat cultivars were grown at three locations in North Dakota using a randomised complete block design to compare different methods for measuring dough/gluten strength and to relate their results to pasta cooking quality. Different rheological tests were used to distinguish the weak, medium strong, strong and very strong gluten cultivars. Alveograph, gluten index and glutograph were the only tests that could differentiate between medium strong and strong gluten samples. Alveograph was the best method to predict gluten strength where few samples are available for assessment. In comparison with alveograph, the gluten index was faster and required less semolina and gave similar results as the alveograph. All tests had significant correlation with cooked spaghetti firmness and negative correlation with cooked weight.

BACKGROUND: Grapes are one of the world's staple fruit crops, with about 80% of the yield being utilised for winemaking. Since grape by-products still contain large amounts of secondary metabolites, uses other than as fertilisers might be appropriate. In this study, white grape pomace (WGP) was incorporated in wheat flour at levels of 10, 20 and 30% (w/w) to investigate its influence on rheological, nutraceutical, physical and sensory properties. RESULTS: Farinograph characteristics of dough with different levels of WGP showed a decrease in water absorption from 56.4% (0% WGP) to 45.9% (30% WGP). Addition of WGP reduced hardness and caused a deterioration in brightness and yellowness of all enriched samples. The smallest addition of WGP (10%) caused an approximately 88% increase in total dietary fibre content as compared with the control. The content of phenolic compounds increased from 0.11 mg g−1 with 0% WGP to 1.07 mg g−1 with 30% WGP. The most stable phenols were as follows: γ-resorcylic acid < gallic acid < tyrosol < catechin < isovanilic acid. An assay of radical-scavenging activity showed that WGP addition greatly enhanced the antioxidant properties of biscuits. Acceptable biscuits were obtained when incorporating 10% WGP. CONCLUSION: WGP might be utilised for the novel formulation of biscuits as an alternative source of dietary fibre and phenols. Copyright © 2012 Society of Chemical Industry

Green gramflour (GGF) was used to substitute wheat flour at 10, 20, 30, 40 and 50% levels to enrich nutritional quality of cookies. The farinograph water absorption increased while peak viscosity, dough elasticity and extensibility decreased with the increasing level of GGF. The spread ratio of the cookies made with 10–50% GGF ranged from 8.80 to 7.40. Cookies with 50% GGF had hard texture and were unacceptable. 40% GGF was optimum in cookies. The protein matrix was disrupted in the microstructure of cookies when GGF was used. Emulsifier sodium stearoyl-2- lactylate (SSL) brought about a significant improvement in the overall quality of cookies made with 40% GGF. The in vitro protein digestibility of cookies with 40% GGF and SSL was 60%. Incorporation of GGF to cookies at 40% level increased protein content by 1.25 times, iron by 1.6 times, calcium and zinc by 2 times and total dietary fiber by 2.3 times than the control. PRACTICAL APPLICATIONS Legumes are added to bakery products to improve the nutritional quality. Legumes are rich in proteins, dietary fiber, complex carbohydrates, resistant starch, vitamins and minerals. This practice also improves the amino acid balance and increases the protein content of the bakery productsmade fromthe blended flours. This research article discusses the effect of replacement of wheat flourwith different levels of green gram flour (GGF) and its influence on the dough rheological properties and the use of additives to improve the quality of cookies made usingGGF.This informationwill be useful to the bakery industry for production of the cookies with improved nutritional quality.

BACKGROUND: The current study aimed to estimate the effects of organic and conventional production systems and four winter wheat (Triticum aestivum L.) bread cultivars on the technological properties of grain, flour, dough and bread, to increase current knowledge regarding the interactions of the technological properties of winter wheat and assess the cultivars for their suitability for organic production systems. RESULTS: All the technological properties winter wheat which were investigated were significantly affected by the agricultural production system and cultivars, and some of them, mostly grain quality parameters, by the harvest year. Grain from organic winter wheat had significantly lower protein and gluten contents, lower sedimentation and flour water absorption values, shorter dough stability time and lower loaf volume, but higher values of starch content and stronger gluten, compared with grain from the conventional wheat. For both production systems significant positive correlations of protein content with gluten content, sedimentation value, dough stability time, loaf volume, farinograph water absorption, and negative with starch content, gluten index were determined. CONCLUSIONS: Statistically significant differences between agricultural production systems were found. The cultivars Ada and Alma had better technological properties that make them more suitable for the organic production system, compared to Sirvinta 1 and Zentos. Copyright © 2012 Society of Chemical Industry

Relationships among soft wheat quality parameters relating to sponge cake volume and sensory tenderness were investigated. Sixteen soft wheats from the 2008–2009 crop and 11 from the 2009–2010 crop, including Japanese soft wheat cultivars, advanced breeders' lines, and western white wheat imported from the United States, were milled and evaluated for protein content, sucrose solvent retention capacity value, specific surface area, flour pasting properties, batter pasting viscosity, sodium dodecyl sulfate sedimentation (SDSS) volume, farinograph properties, specific cake volume, and sensory tenderness score to investigate their relationships. Batter pasting viscosity was measured with a Rapid Visco Analyzer (RVA) at 2 min after reaching 90°C in heating a mixture with equal weights of flour, sucrose, and water. RVA minimum viscosity of flour suspension in water was the most influencing factor and positively correlated to specific cake volume, and RVA batter pasting viscosity and SDSS volume were ne...

BACKGROUND: To increase pulse consumption, pita bread was fortified with pulse flours milled from green lentils, navy beans and pinto beans, which were ground to produce fine and coarse flours. Pita breads were prepared using composite flours containing pulse flours (25, 50, 75%) and wheat flour or 100% pulse flours and adjusting the amount of water required for mixing based on farinograph water absorption. Pita bread quality was evaluated according to diameter, pocket height, specific loaf volume, texture and crust colour. RESULTS: Blends made from pulse flours with coarse particle size showed higher rates of water absorption. All composite flours and 100% pulse flours produced pitas with pockets, confirming their suitability for this product. Crust colour of pitas was affected less by navy bean flour than by lentil flour. Pita breads made with pinto bean flour were superior in texture. Overall, navy and pinto bean flours appeared more suitable for pita bread. Flours with coarse particle sizes produced pitas with better colour and texture. Sensory parameters of pitas containing 25% coarse pinto or navy bean flour were as good as or better than those from the wheat control. CONCLUSION: Acceptable pita breads can be made using pulse flours, although the substitution level is limited to 25%. Copyright © 2012 Society of Chemical Industry

The effect of replacement of whole wheat flour up to 60% with the blends of barley flour, banana flour and soya protein isolate (BBS) on the rheological, north Indian parotta (NIP)-making characteristics of whole wheat flour and nutritional characteristics of NIPwith special reference to protein, starch and dietary fiber was studied. The results showed an increase in the farinograph water absorption, amylograph peak viscosity and extensograph resistance to extension, and a decrease in extensibility and overall quality score of NIP from 54 to 25 for the maximum score of 60 with an increase in BBS up to 60%. The addition of combination of additives (CAs), namely dry gluten powder, sodium stearoyl-2-lactylate and hydroxypropyl methylcellulose, significantly improved the overall quality of NIP with 40% BBS. The NIP with 40% BBS + CA showed higher total protein, digestible protein, percent availability, total fiber, soluble and insoluble fibers, resistant starch and lower starch hydrolysis index than control NIP.