Search

As emerging 2D materials, arsenene and arsenic materials have attracted rising interest in the past few years. The diverse crystalline phases, exotic electrical characteristics, and widespread applications of 2D arsenene and arsenic bring them great research value and utilization potential. Herein, the recent progress of 2D arsenene and arsenic is reviewed in terms of fundamental properties, preparation, and applications. The fundamental properties of 2D arsenene and arsenic, including the crystal phases, environmental stability, and electrical structure, from theoretical to experimental reports are first summarized. Then, the experimental processes for preparing 2D arsenene and arsenic, along with their respective advantages and disadvantages, are introduced including epitaxial growth, mechanical exfoliation, and liquid-phase exfoliation. Moreover, applications of 2D arsenene and arsenic are discussed, suggesting a wide range of applications of 2D arsenene and arsenic in field-effect transistors, sensors, catalysts, biological applications, and so on. Finally, some perspectives about the challenges and opportunities of promising 2D arsenene and arsenic are provided. This review provides a helpful guidance and stimulates more focus on future explorations and developments of 2D arsenene and arsenic.

Rechargeable silicon anode lithium ion batteries (SLIBs) have attracted tremendous attention because of their merits, including a high theoretical capacity, low working potential, and abundant natural sources. The past decade has witnessed significant developments in terms of extending the lifespan and maintaining high capacities of SLIBs. However, the detrimental issue of low initial Coulombic efficiency (ICE) toward SLIBs is causing more and more attention in recent years because ICE value is a core index in full battery design that profoundly determines the utilization of active materials and the weight of an assembled battery. Herein, a comprehensive review is presented of recent advances in solutions for improving ICE of SLIBs. From design perspectives, the strategies for boosting ICE of silicon anodes are systematically categorized into several aspects covering structure regulation, prelithiation, interfacial design, binder design, and electrolyte additives. The merits and challenges of various approaches are highlighted and discussed in detail, which provides valuable insights into the rational design and development of state-of-the-art techniques to deal with the deteriorative issue of low ICE of SLIBs. Furthermore, conclusions and future promising research prospects for lifting ICE of SLIBs are proposed at the end of the review.

Rechargeable magnesium batteries have attracted increasing attention due to the high theoretical volumetric capacities, dendrite formation-free characteristic and low cost of Mg metal anodes. However, the development of magnesium batteries is seriously hindered by the lack of capable cathode materials with long cycling life and fast solid-state diffusion kinetics for highly-polarized divalent Mg2+ ions. Herein, vanadium tetrasulfide (VS4 ) with special one-dimensional atomic-chain structure is reported to be able to serve as a favorable cathode material for high-performance magnesium batteries. Through a surfactant-assisted solution-phase process, sea-urchin-like VS4 nanodendrites are controllably prepared. Benefiting from the chain-like crystalline structure of VS4 , the S22- dimers in the VS4 nanodendrites provide abundant sites for Mg2+ insertion. Moreover, the VS4 atomic-chains bonded by weak van der Waals forces are beneficial to the diffusion kinetics of Mg2+ ions inside the open channels of VS4 . Through a series of systematic ex situ characterizations and density functional theory calculations, the magnesiation/demagnesiation mechanism of VS4 are elucidated. The VS4 nanodendrites present remarkable performance for Mg2+ storage among existing cathode materials, exhibiting a remarkable initial discharge capacity of 251 mAh g-1 at 100 mA g-1 and an impressive long-term cyclability at large current density of 500 mA g-1 (74 mAh g-1 after 800 cycles).

The interchain contraction and association of polystyrene in semidilute solution near the Θ temperature are studies using NET. The results reveal that during a drop of temperature, polystyrene chains pass through different states: a smooth change of conformation at temperatures above the Θ temperature, an accelerated contraction and association, aggregation of polymer chains, and then further continuous contraction below the Θ temperature. A pronounced hysteresis is observed during repeated heating. A viscosity study of the same solution was compared with the NET results. It indicates that NET can effectively be used to study conformational changes like contraction and association of polymer chains in a semidilute solution.

Here, novel multifunctional electronic skins (E-skins) based on aligned few-walled carbon nanotube (AFWCNT) polymer composites with a piezoresistive functioning mechanism different from the mostly investigated theory of “tunneling current channels” in randomly dispersed CNT polymer composites are demonstrated. The high performances of as-prepared E-skins originate from the anisotropic conductivity of AFWCNT array embedded in flexible composite and the distinct variation of “tube-to-tube” interfacial resistance responsive to bending or stretching. The polymer/AFWCNT-based flexion-sensitive E-skins exhibit high precision and linearity, together with low power consumption (

Effects of hydrophobic and electrostatic interactions on the self-assembling process of the ionic-complementary peptide EMK16-II are investigated by atomic force microscopy imaging, circular dichroism spectra, light scattering, and chromatography. It is found that the hydrophobicity of the peptide promotes the aggregation in pure water even at a very low concentration, resulting in a much lower critical aggregation concentration than that of another peptide, EAK16-II. The effect of anions in solution with different valences on electrostatic interactions is also important. Monovalent anions (Cl− and Ac−) with a proper concentration can facilitate the formation of peptide fibrils, with Cl− of smaller size being more effective than Ac− of larger size. However, only small amounts of fibrils, but plenty of large amorphous aggregates, are found when the peptide solution is incubated with multivalent anions, such as SO, C6H5O, and HPO. More importantly, by gel filtration chromatography, the citrate anion, which induces a similar effect on the self-assembling process of EMK16-II as that of SO and HPO, can interact with two or more positively charged residues of the peptide and reside in the amorphous aggregates. This implies a “salt bridge” effect of multivalent anions on the peptide self-assembling process, which can interpret a previous puzzle why divalent cations inhibit the formation of ordered nanofibrils of the ionic-complementary peptides. Thus, our results clarify the important effects of hydrophobic and electrostatic interactions on the self-assembling process of the ionic-complementary peptides. These are greatly helpful for us to understand the mechanism of peptides' self-assembling process and protein folding and aggregation. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 318–329, 2010. This article was originally published online as an acceptedpreprint. The “Published Online” date corresponds to the preprintversion. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com