Search

Background. Hepatitis B virus-related acute-on-chronic liver failure (HBV-ACLF) is a common type of liver failure with a high mortality. This study aimed at investigating the safety and efficacy of the combination treatment of plasma exchange (PE) and umbilical cord-derived mesenchymal stem cell (UC-MSCs) transplantation for HBV-ACLF patients. Methods. A total of 110 HBV-ACLF patients treated in our hospital from January 2012 to September 2017 were enrolled into this trial and divided into the control group (n=30), UC-MSC group (n=30), PE group (n=30), and UC-MSC + PE group (n=20) based on their treatments. The hepatic function, coagulation, and virological and immunological markers were assessed at baseline and 30, 60, 90, 180, and 360 days. The endpoint outcomes were death and unfavorable outcome (need for liver transplantation or death). Results. The UC-MSC + PE group had the lowest rates of death and unfavorable outcome at 30 days, 60 days, and 90 days posttreatment among the four groups, but the difference did not reach significances. The multivariate logistic regression analysis demonstrated that hemoglobin, prothrombin activity, and MELD (model for end-stage liver disease) score were the independent factors associated with the unfavorable outcome (all P

Objective To investigate whether the periprosthetic bone environment could be affected by activity during the early rehabilitation period after primary total hip arthroplasty (THA) and to evaluate the safety and efficacy of activity during the early rehabilitation period. Methods This random clinical trial was conducted from January 2017 to July 2017. A total of 22 selected patients with advanced osteonecrosis of the femoral head (ONFH) who underwent primary unilateral THA were randomized (1:1) to a high activity level group (HA group) or a low activity level group (LA group). The HA group included nine men and two women, aged 53.18 ± 13.29 years. The LA group included five men and six women, aged 55.73 ± 11.73 years. The intervention was different postoperative daily walking distances guided by researchers: 1727.27 ± 564.08 m 0–2 months and 4272.73 ± 904.53 m 3–6 months postoperation for the HA group and 909.09 ± 583.87 m 0–2 months and 2409.09 ± 1068.13 m 3–6 months postoperation for LA group. The primary outcomes were radiographic evaluation (prosthetic stability and stress shielding based on the Engh scale) and bone mineral density (BMD) with a femoral prosthesis (individual and intergroup comparison using seven Gruen zones) at 6 months postoperatively. Secondary outcomes were set to confirm the safety and efficacy of activity during early rehabilitation, including day 1 erythrocyte sedimentation rate (ESR), day 1 hypersensitive C‐reactive protein (CRP), length of hospital stay (LOS), and the Harris hip score (HHS) at discharge, 2 months postoperatively, and 6 months postoperatively. Results Patients were followed up for 6 months after surgery. Regarding primary outcomes, all prostheses were assessed as stable, with bone in‐growth. There were no adverse events in any cases. The HA group had a higher incidence of stress shielding than the LA group, but there was no statistical significance (63.64% vs 18.18%; P > 0.05). The degree of stress shielding had a different distribution for the two groups (P 0.05). The HHS on day of discharge was higher in the HA group than in the LA group (60.73 ± 5.37 points vs 51.18 ± 8.05 points, P 0.05) and 6 months (90.45 ± 5.24 points vs 91.55 ± 4.03 points, P > 0.05). Conclusion High activity levels during early rehabilitation after primary THA accelerate the process of bone remodeling and aggravate stress shielding, with no significant benefits for functional recovery.

Objective To investigate the changes in the lumbar intervertebral foramen (LIVF) dimensions from neutral supine to direct anterior approach (DAA)‐specific hyperextension supine position through a standardized three‐dimensional (3D) reconstruction computerized tomography (CT) method. Methods A total of 35 healthy volunteers (18 men and 17 women) were included in this retrospective study. The mean age of enrolled subjects was 28.9 ± 5.0 years. In September 2018, all the individuals underwent a 3D CT scan of the lumbar spine in neutral and 30° hyperextension supine positions, which mimicked the patient’s position in DAA total hip arthroplasty (THA). The dimensions of the LIVF, including foraminal area, height, and width, were measured on 3D reconstructed CT models at all lumbar foraminal levels. Foraminal area was defined as the area bounded by the adjacent superior and inferior vertebral pedicles, the posterosuperior boundary of the inferior vertebral body, the surface of the intervertebral disc posteriorly, the posteroinferior boundary of the superior vertebral body, and the surface of the ligamentum flavum anteriorly. Foraminal height was defined as the longest distance between the border of the superior and the inferior pedicle. Foraminal width was defined as the shortest distance between the posteroinferior edge of the superior vertebrae and the opposing boundary. Subgroup analysis and multiple linear regression were used to evaluate the relationship between percentage changes of the LIVF dimensions and side, sex, and age. Results The LIVF dimensions varied significantly between the two positions at all levels (P 0.05). Multiple linear analysis showed that the percentage changes of LIVF dimensions were not related to side, sex, and age (P > 0.05). Conclusion The dimensions of the LIVF showed significant decrease at all levels in the DAA‐specific hyperextension supine position compared with the neutral supine position, and the percentage changes of LIVF dimensions were not influenced by side, sex, and age.

Objective To introduce a three‐point method combining the midpoint of the posterior cruciate ligament (PCL), the midsulcus of the tibial spines, and the midpoint of the anterior cruciate ligament (ACL) to determine appropriate tibial resection and component placing during TKA and to compare this method with Insall's 1/3 method. Methods A consecutive series of 128 knees that underwent TKA from January 2015 to August 2018 were analyzed. In one group (64 knees), the medial 1/3 of tibial tubercle (the Insall's traditional method) was used for tibial component alignment. In the other group (64 knees), the three‐point line connecting the midpoint of the PCL, the midpoint of the tibial spines, and the midpoint of the ACL was used for tibial component alignment. Both groups used the anterior tibial tendon as the distal reference for tibial resection. The coronal alignment error of the tibial component was determined by the angle between the line parallel to the tibial component platform and the tibial mechanical axis measured on postoperative radiograph. The axial rotation error of the femoral or tibial component was the intersection angle between the transepicondylar axis (TEA) and a line tangent to the posterior edge of the femoral or tibial component measured on CT. The coronal and axial alignment errors were compared between the two groups. Results The average coronal alignment error of the tibial component in the three‐point method group was 0.2° ± 1.4° versus − 0.9° ± 1.8°in the Insall's 1/3 method group (P

Objective To measure the factors that affect functional leg length of Crowe type IV Developmental dysplasia of the hip (DDH) patients and to review our own methods to balance leg length discrepancy (LLD) in Crowe type IV DDH patients. Methods This was a prospective observational study which started in June 2017 and ended in August 2019. Inclusion criteria included: (i) Crowe type I or Crowe type IV hip dysplasia patients who underwent total hip arthroplasty (THA) in the Department of Orthopaedics at our institution between July 2017 and June 2018; (ii) the patients were treated with our specific leg length balance strategy; and (iii) the related outcomes of patients were completely recorded. Finally, 18 consecutive Crowe type I patients (20 hips) and 14 consecutive Crowe type IV patients (18 hips) were selected and divided into two groups according to Crowe types. All patients received THA, and patients with a longer affected side and inferior anatomical acetabular positions in Crowe type IV group also received subtrochanteric osteotomy. During operation and after hip reduction, leg lengths were compared while two legs were in an extended position and the operative leg was on top of the non‐operative one. Additional leg length adjustment was applied when leg length was considered to be unequal. Prior to surgery, subluxation height of the femoral head on the affected side, functional LLD, bony length of lower limbs, and distance from teardrops to the lowest point line of the sacroiliac joint were recorded. After surgery, cup sizes, functional LLD, and height of hip rotational centers were measured. Clinical evaluations, such as Harris Hip Score (HHS) and SF‐12 scale, were also obtained before and after surgery for all patients. Results At the last follow‐up, functional LLD and clinical measurements of both Crowe type IV group and Crowe type I group were significantly improved. Compared with Crowe type I patients, Crowe type IV patients had a significantly lower MCS, a significantly longer leg lengthening length and a significantly lower hip center height after surgery. Significant differences of tibia length, leg length, and teardrop position were found between affected side and healthy side of Crowe type IV patients. Only three of 14 Crowe type IV patients remained under 1 cm functional LLD. Five patients in the Crowe type IV group developed lower limb numbness immediately following surgery, and they all recovered within 6 months. The average follow‐up period for either group was 14 months, and all patients were followed‐up at 1, 3, 6, and 12 months then yearly after surgery until the final follow‐up. Conclusion After detailed leg length balance process, THA combined with transverse sub‐trochanter osteotomy could be an effective method to achieve equal function leg length with most Crowe type IV patients.

In this article, a (2+1)-dimensional Korteweg-de Vries equation is investigated. Abundant periodic wave solutions are obtained based on the Hirota’s bilinear form and a direct test function. Meanwhile, the interaction solutions between lump and periodic waves are presented. What is more, we derive the interaction solutions among lump, periodic, and solitary waves. Based on the extended homoclinic test technique, some new double periodic-soliton solutions are presented. Finally, some 3D and density plots are simulated and displayed to respond the dynamic behavior of these obtained solutions.

Total hip arthroplasty (THA) of Crowe type IV developmental dysplasia of the hip (DDH) is challenging. Although traditional (lateral, posterolateral, and posterior) THA approaches have been used with great anatomic success, they damage periarticular muscles, which are already quite weak in type IV DDH. The recently developed direct anterior approach (DAA) can provide an inter‐nerve and inter‐muscle approach for THA of type IV dysplasia hips. However, femur exposure with the DAA could be difficult during surgery and it is hard to apply femoral shortening osteotomy. THA techniques used for type IV DDH include anatomic hip center techniques (true acetabular reconstruction) and high hip center techniques, wherein an acetabulum is reconstructed above the original one. Although anatomic construction of the hip center is considered “the gold standard” treatment, it is impossible if the anatomical acetabular is too small and shallow. Procedures used to support type IV DDH reduction with anatomic hip center techniques include greater trochanter osteotomy, lesser trochanter osteotomy, and subtrochanteric osteotomy. However, these techniques have yet to be standardized, and it is unclear which is best for type IV DDH. One‐state and two‐state non‐osteotomy reduction techniques have also been introduced to treat type IV DDH. Potential complications of THA performed in patients with type IV DDH include leg length discrepancy (LLD), peri‐operative femur fracture, nonunion of the osteotomy site, and nerve injury. It is worth noting that nowadays an increasing number of Crowe type IV DDH patients are more sensitive to postoperative LLD.

Developmental dysplasia of the hip (DDH) is accompanied by morphological alterations on both the acetabular and the femoral side. Total hip arthroplasty (THA) provides effective treatment in cases of neglected DDH but requires elaborate preoperative planning. To determine the morphological changes resulting from the dysplasia, the anatomic acetabular position, the height of the femur head dislocation, the height of the femur head dislocation, and the combined anteversion must all be established. In addition, a vital and complicated process of strategizing leg length balance must be conducted in cases of severe DDH. Each type of leg length discrepancy (LLD), including bony and functional and anatomical LLD, should be evaluated in the context of the presence or absence of a fixed pelvic tilt. Moreover, with severe unilateral dislocated hips, a more inferior change in the original rotational center of the hip must be accounted for. Due to these multiple morphological changes, the accurate size of the prosthesis and the cup position are difficult to predict. In comparison with other methods, CT scan‐based 3‐dimensional templating provides the best accuracy. Despite the presence of anatomic alterations, various types of acetabular and femoral prostheses have been developed to treat hip dysplasia. Both cemented and cementless cups are used in DDH cases. In DDH accompanied by insufficient acetabular bone stock, a cemented cup combined with bone graft provides a reliable treatment. Monoblock stems can be used when the combined anteversion is less than 55°, and a modular stem system when this parameter is greater than 55°. Customized stems can be designed for DDH coupled with severe proximal femoral distortion. A ceramic‐on‐ceramic bearing is considered optimal for young DDH patients.

In this study, soil samples collected from different plain afforestation time (1 year, 4 years, 10 years, 15 years, and 20 years) in Miyun were characterized, including total organic carbon (TOC), total nitrogen (TN), total phosphorus (TP), available K (K+), microbial biomass carbon (MBC), and dissolved organic carbon (DOC). The DOM in the soil samples with different afforestation time was further characterized via DOC, UV-Visible spectroscopy, excitation-emission matrix (EEM) fluorescence spectroscopy, and 1H NMR spectroscopy. The results suggested that the texture of soil sample was sandy. The extracted DOM from soil consisted mainly of aliphatic chains and only a minor aromatic component. It can be included that afforestation can improve the soil quality to some extent, which can be partly reflected from the indexes like TOC, TN, TP, K+, MBC, and DOC. And the characterization of DOM implied that UV humic-like substances were the major fluorophores components in the DOM of the soil samples, which consisted of aliphatic chains and aromatic components with carbonyl, carboxyl, and hydroxyl groups.