Search

Tissue reconstruction has an unmet need for soft active scaffolds that enable gentle loading with regeneration-directing bioactive components by soaking up but also provide macroscopic dimensional stability. Here microporous hydrogels capable of an inverse shape-memory effect (iSME) are described, which in contrast to classical shape-memory polymers (SMPs) recover their permanent shape upon cooling. These hydrogels are designed as covalently photo cross-linked polymer networks with oligo(ethylene glycol)-oligo(propylene glycol)-oligo(ethylene glycol) (OEG-OPG-OEG) segments. When heated after deformation, the OEG-OPG-OEG segments form micelles fixing the temporary shape. Upon cooling, the micelles dissociate again, the deformation is reversed and the permanent shape is obtained. Applicability of this iSME is demonstrated by the gentle loading of platelet-rich plasma (PRP) without causing any platelet activation during this process. PRP is highly bioactive and is widely acknowledged for its regenerative effects. Hence, the microporous inverse shape-memory hydrogel (iSMH) with a cooling induced pore-size effect represents a promising candidate scaffold for tissue regeneration for potential usage in minimally invasive surgery applications.

The healing process after implantation of biomaterials involves the interaction of many contributing factors. Besides their in vivo functionality, biomaterials also require characteristics that allow their integration into the designated tissue without eliciting an overshooting foreign body reaction (FBR). The targeted design of biomaterials with these features, thus, needs understanding of the molecular mechanisms of the FBR. Much effort has been put into research on the interaction of engineered materials and the host tissue. This elucidated many aspects of the five FBR phases, that is protein adsorption, acute inflammation, chronic inflammation, foreign body giant cell formation, and fibrous capsule formation. However, in practice, it is still difficult to predict the response against a newly designed biomaterial purely based on the knowledge of its physical-chemical surface features. This insufficient knowledge leads to a high number of factors potentially influencing the FBR, which have to be analyzed in complex animal experiments including appropriate data-based sample sizes. This review is focused on the current knowledge on the general mechanisms of the FBR against biomaterials and the influence of biomaterial surface topography and chemical and physical features on the quality and quantity of the reaction. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 927-940, 2017.

Gelatin-based hydrogels offer various biochemical cues that support encapsulated cells and are therefore suitable as cell delivery vehicles in regenerative medicine. However, besides the biochemical signals, biomechanical cues are crucial to ensure an optimal support of encapsulated cells. Hence, we aimed to correlate the cellular response of encapsulated cells to macroscopic and microscopic elastic properties of glycidylmethacrylate (GMA)-functionalized gelatin-based hydrogels. To ensure that different observations in cellular behavior could be attributed to differences in elastic properties, an identical concentration as well as degree of functionalization of biopolymers was utilized to form covalently crosslinked hydrogels. Elastic properties were merely altered by varying the average gelatin-chain length. Hydrogels exhibited an increased degree of swelling and a decreased bulk elastic modulus G′ with prolonged autoclaving of the starting solution. This was accompanied by an increase of hydrogel mesh size and thus by a reduction of crosslinking density. Tougher hydrogels retained the largest amount of cells; however, they also interfered with cell viability. Softer gels contained a lower cell density, but supported cell elongation and viability. Observed differences could be partially attributed to differences in bulk properties, as high crosslinking densities interfere with diffusion and cell spreading and thus can impede cell viability. Interestingly, a microscopic elastic modulus in the range of native soft tissue supported cell viability and elongation best while ensuring a good cell entrapment. In conclusion, gelatin-based hydrogels providing a soft tissue-like microenvironment represent adequate cell delivery vehicles for tissue engineering approaches. Copyright © 2016 John Wiley & Sons, Ltd.

The short- and long-term thrombogenicity of implant materials is still unpredictable, which is a significant challenge for the treatment of cardiovascular diseases. A knowledge-based approach for implementing biofunctions in materials requires a detailed understanding of the medical device in the biological system. In particular, the interplay between material and blood components/cells as well as standardized and commonly acknowledged in vitro test methods allowing a reproducible categorization of the material thrombogenicity requires further attention. Here, the status of in vitro thrombogenicity testing methods for biomaterials is reviewed, particularly taking in view the preparation of test materials and references, the selection and characterization of donors and blood samples, the prerequisites for reproducible approaches and applied test systems. Recent joint approaches in finding common standards for a reproducible testing are summarized and perspectives for a more disease oriented in vitro thrombogenicity testing are discussed.

The chain length and end groups of linear PEG grafted on smooth surfaces is known to influence protein adsorption and thrombocyte adhesion. Here, it is explored whether established structure function relationships can be transferred to application relevant, rough surfaces. Functionalization of poly(ether imide) (PEI) membranes by grafting with monoamino PEG of different chain lengths (M-n=1kDa or 10kDa) and end groups (methoxy or hydroxyl) is proven by spectroscopy, changes of surface hydrophilicity, and surface shielding effects. The surface functionalization does lead to reduction of adsorption of BSA, but not of fibrinogen. The thrombocyte adhesion is increased compared to untreated PEI surfaces. Conclusively, rough instead of smooth polymer or gold surfaces should be investigated as relevant models.

Materials for biomedical applications are often chosen for their bulk properties. Other requirements such as a hemocompatible surface shall be fulfilled by suitable chemical functionalization. Here we show, that linear, side-chain methylated oligoglycerols (OGMe) are more stable to oxidation than oligo(ethylene glycol) (OEG). Poly(ether imide) (PEI) membranes functionalized with OGMes perform at least as good as, and partially better than, OEG functionalized PEI membranes in view of protein resistance as well as thrombocyte adhesion and activation. Therefore, OGMes are highly potent surface functionalizing molecules for improving the hemocompatibility of polymers.

The cell population of peripheral blood monocytes/macrophages (MO) is heterogeneous: The majority of the MO are CD14++ CD16- and named "classical" (= MO1). Furthermore, two other subpopulations were described: CD14++ CD16+ ("intermediate" = MO2) and CD14+ CD16++ ("non-classical" = MO3). It is reported that MO2 possess anti-inflammatory properties and express the MO lineage marker CD163. On a hydrophilic neutrally charged acrylamide-based hydrogel human intermediate (CD14++ CD16+ ), angiogenically stimulated CD163++ monocytes/macrophages (aMO2) maintained a proangiogenic and noninflammatory status for at least 14 days. Here, we explored whether this aMO2 subset adhered to hydrophobic poly(n-butyl acrylate) networks (cPnBA) and also remained in its proangiogenic and noninflammatory status. Because substrate elasticity can impact adherence, morphology, and function of cells, cPnBAs with different Young's modulus (250 and 1100 kPa) were investigated, whereby their elasticity was tailored by variation of the cross-linker content and matched to the elasticity of human arteries. The cPnBAs exhibited similar surface properties (e.g., surface roughness), which were maintained after ethylene oxide sterilization and exposure in serum-free cell culture medium for 18 h at 37°C. aMO2 were seeded on cPnBA samples (1.7 × 10(5) cells/1.33 cm(2) ) in Dulbecco's modified Eagle medium (DMEM high glucose) supplemented with vascular endothelial growth factor 165 (VEGF-A(165) , 10 ng/mL) and fetal calf serum (10 vol%) for 3 and 72 h. On both polymeric samples (n = 3 each), the numbers of adherent cells per unit area were significantly higher (P

Biopolymer-based systems with adjustable macroscopic properties that can be varied in a wide range using only small changes in chemical composition are promising candidates for biomaterial-induced autoregeneration. Glycidylmethacrylated gelatin is photopolymerized with the addition of PEG mono- or dimethacrylate to form co-networks in pH = 7.4 PBS. The degree of swelling (Q) and water uptake (H) in PBS at 37 °C are tailorable for PEGDMA co-networks (Q ≈ 250-650 vol%), while the storage modulus of swollen networks at 3 °C can be adjusted by the PEG(D)MA content (G' = 0.7-145 kPa). Indirect cytotoxicity tests on ethylene oxide sterilized films show non-toxic responses for the homonetwork and all but one PEGDMA-containing co-networks materials.

Degradable polymers are essential to enable biomaterial-based regenerative therapies, particularly, in articular cartilage defect healing, which remains a major clinical challenge. The aim of this study was to investigate the effect of two degradable polymers (as a film or scaffold) on primary articular chondrocytes vitality, adherence, differentiated phenotype and morphology. Films and electro-spun scaffolds were prepared from degradable poly(ether)ester urethane (PDC), which was synthesized via co-condensation of poly(p-dioxanone)diol and poly(e-caprolactone)diol with an aliphatic diisocyanate and poly(p-dioxanone) (PPDO). The thermal and mechanical properties and the surface roughness of the films and scaffolds were examined by differential scanning calorimetry, dynamic mechanical thermal analysis, tensile tests and optical profilometry. Primary porcine articular chondrocytes were seeded on the polymers and analysed for viability, ultrastructure (scanning electron microscopy) and immunolabelled for type II collagen. All films and scaffolds exhibited a low endotoxin load

Biomaterial-induced autoregeneration requires materials with distinct tailored mechanical and thermal properties, water uptake and swelling properties as well as degradation behavior. Furthermore, before any biomaterial can be applied in vivo, in vitro studies should be performed that confirm the suitability for such applications. One facet in this process is the evaluation of endotoxin loads and immunogenic response to the material to avoid an unspecific activation of the immune system, which otherwise might cause fever and could lead to life–threatening pathologies. In this study, gelatins functionalized with desaminotyrosine (DAT) or desaminotyrosyl tyrosine (DATT) were investigated in terms of their endotoxin content and their potential to induce an inflammatory cytokine response in macrophages. Using the Limulus amebocyte lysate (LAL) test it could be shown that the endotoxin content was substantially reduced by using certified low endotoxin containing gelatin and performing the gelatin functionalization under cleanroom conditions. Furthermore, production of inflammatory cytokines such as interleukin 6 (IL-6) and tumor necrosis factor–alpha (TNFα) of an immune relevant macrophage cell line was significantly reduced for these materials. The survival of the macrophage cell line in the presence of DAT(T)-functionalized gelatins was not influenced by both materials. Therefore, DAT- and DATT-functionalized gelatins were shown to have passed the tests concerning immunological responses important for their applicability in vivo.

Mechanical conditioning can serve as a potent tool to influence mechano-responsive cells, which plays a prominent role during formation and regeneration of functional tissue. Recently, the differentiation of mesenchymal stem cells could be influenced by the local stiffness of hydrogels used as 2D substrates. However, the mechanical properties and the swellability of hydrogels in physiological liquids are difficult to control precisely as their properties strongly depend on physical parameters like ionic strength or pH value. Here, we explored amorphous, hydrophobic poly(n-butyl acrylate) networks (cPnBA) as soft substrates for cell culture system with adjustable mechanical properties. cPnBAs were synthesized via bulk radical polymerization from n-butyl acrylate (nBA) and poly(propylene glycol) dimethacrylate (PPGDMA) as crosslinker. The Young's modulus for cPnBAs determined by tensile tests could be systematically adjusted from 100 kPa to 10 MPa by increasing the PPGDMA-content at ambient temperature, while the glass transition temperature (Tg) was found to increase from −46 to −22°C. All cPnBAs exhibited similar surface properties with a surface roughness (Rq) in the range from 1.4 to 0.4 µm and advancing contact angles from 115° to 100°, which remained constant after ethylene oxide sterilization. The extracts of sterilized materials were tested for cytotoxic effects with L929 cells. All tested samples were non-cytotoxic. The functional integrity of cell membranes and mitochondrial activity stayed unaffected. The investigated polymer networks are promising candidates as soft substrates for passive mechanical stimulation of cells in vitro in cell culture devices or in vivo as implant coatings. Copyright © 2010 John Wiley & Sons, Ltd.

Objective: Magnetocardiography (MCG) as a noninvasive, noncontact and risk-free diagnostic method predicts ischemic coronary artery disease (CAD) in patients with acute chest pain at admission with high accuracy. However, it remains unclear whether MCG findings can add prognostic information. Method: A cohort of 402 consecutive patients presenting at the intensive care unit (ICU) with acute chest pain without ST segment elevation (NSTEMI) were included in a prospective registry. In order to prove the prognostic value of MCG a head-to-head comparison of the admission MCG, ECG, TnI, and ECHO tests was made. Results: In 43 patients (10.7%) the MCG could not be analyzed due to insufficient signal-to-noise ratio. Complete follow-up over a period of up to 3 years was obtained in 355 out of the 359 patients (98.9%). Age at admission was 67.2 ± 10.3 years, 59.7% males. In the group of patients with an abnormal MCG at admission, 43 out of 249 patients (17.3%) died in the follow-up period, while in the group of patients with a normal MCG at admission only 4 out of 106 patients died (3.77%). The relative risk was 4.58 (95% confidence intervals: 1.68–12.42). A multivariate regression analysis revealed the highest mortality risk for patients with diabetes mellitus and an abnormal MCG at admission (RR = 18.0; 95% CI: 2.49–133.3). Conclusion: Resting MCG at hospital admission predicts 3-year mortality in patients presenting with acute chest pain without ST segment elevation in the ECG. MCG seems to be valuable in identifying chest pain patients at highest risk.

Biomimetic polymer network systems with tailorable properties based on biopolymers represent a class of degradable hydrogels that provides sequences for protein adsorption and cell adhesion. Such materials show potential for in vitro MSC proliferation as well as in vivo applications and were obtained by crosslinking different concentrations of gelatin using varying amounts of ethyl lysine diisocyanate in the presence of a surfactant in pH 7.4 PBS solution. Material extracts, which were tested for cytotoxic effects using L929 mouse fibroblasts, were non-toxic. The hydrogels were seeded with human bone marrow-derived MSCs and supported viable MSCs for the incubation time of 9 d. Preadsorption of fibronectin on materials improved this biofunctionality.

The dissociation of isocyanide complexes of human adult and fetal haemoglobin, of the Hb of carp and cheironomus, and of the horse myoglobin has been investigated by means of replacing the R-NC ligand by CO. Furthermore the dissociation of Hb-A complexes induced by dilution has been studied. Ligand replacement on Mb occurs homogeneously. Associated Hb however exhibit biphasic reactions. This behaviour is believed to depend on subunit differences in reactivity. No ligand specifity could be observed. The dissociation rate constant k decreases in the sequence Mb > Hb-F ≅ Hb-A ≅ carp Hb > cheironomus Hb. The only small variation of k confirms that the species differences in the equilibrium constant K are mainly attributable to the variation of the respective association velocity constants k′. Compared with Hb-A, carp- and especially cheironomus-Hb exhibit an enhanced decrease of k with increased ligand size, this being probably due to interactions between apolar protein side chains in the haem pocket and the respective ligand. Additional dilution relaxation experiments show that the dissociation rate constant k decreases with increasing percentage R-NC-saturation of Hb; this confirms the dissociation reaction to be the kinetic basis of haem haem interaction. In the presence of allosteric effectors (inositole hexaphosphate) again the decreased equilibrium constants of the R-NC complexes are mainly due to lower k' values, while k varies to a minor extent.

1.4-Dihydro-benzoesaure entsteht durch Birch-Reduktion der Benzoesaure. Sie ist autoxydabel und lagert sich mit Kalilauge in 3.4-Dihydro-benzoesaure um. Die Verhaltnisse bei der Bromierung werden beschrieben.