Search

Composite manufacturing by Liquid Composite Molding (LCM) processes such as Resin Transfer Molding involve the impregnation of a net-shape fiber reinforcing preform inside a mold cavity by a polymeric resin. The success of the process and part manufacture depends on the complete impregnation of the dry fiber preform. Race tracking refers to the common phenomenon occurring near corners, bends, airgaps and other geometrical complexities involving sharp curvatures within a mold cavity creating fiber free and highly porous regions. These regions provide paths of low flow resistance to the resin filling the mold, and may drastically affect flow front advancement, injection and mold pressures. While racetracking has traditionally been viewed as an unwanted effect, pre-determined racetracking due to flow channels can be used to enhance the mold filling process. Advantages obtained through controlled use of racetracking include, reduction of injection and mold pressures required to fill a mold, for constant flow rate injection, or shorter mold filling times for constant pressure injection. Flow channels may also allow for the resin to be channeled to areas of the mold that need to be filled early in the process. Modeling and integration of the flow channel effects in the available LCM flow simulations based on Darcian flow equations require the determination of equivalent permeabilities to define the resistance to flow through well-defined flow channels. These permeabilities can then be applied directly within existing LCM flow simulations. The present work experimentally investigates mold filling during resin transfer molding in the presence of flow channels within a simple mold configuration. Experimental flow front and pressure data measurements are employed to experimentally validate and demonstrate the positive effect of flow channels. Transient flow progression and pressure data obtained during the experiments are employed to investigate and validate the analytical predictions of equivalent permeability for a rectangular flow channel. Both experimental data and numerical simulations are presented to validate and characterize the equivalent permeability model and approach, while demonstrating the role of flow channels in reducing the injection and mold pressures and redistributing the flow.

The success of resin transfer molding (RTM) depends upon the complete wetting of the fiber preform. Effective mold designs and process modifications facilitating the improved impregnation of the preform have direct impact on the successful manufacturing of parts. Race tracking caused by variations in permeabilities around bends, corners in liquid composite molding (LCM) processes such as RTM have been traditionally considered undesirable, while related processes such as vacuum assisted RTM (VARTM) and injection molding have employed flow channels to improve the resin distribution. In this paper, studies on the effect of flow channels are explored for RTM through process simulation studies involving flow analysis of resin, when channels are involved. The flow in channels has been modeled and characterized based on equivalent permeabilities. The flow in the channels is taken to be Darcian as in the fiber preform, and process modeling and simulation tools for RTM have been employed to study the flow and pressure behavior when channels are involved. Simulation studies based on a flat plate indicated that the pressures in the mold are reduced with channels, and have been compared with experimental results and equivalent permeability models. Experimental comparisons validate the reduction in pressures with channels and validate the use of equivalent permeability models. Numerical simulation studies show the positive effect of the channels to improve flow impregnation and reduce the mold pressures. Studies also include geometrically complex parts to demonstrate the positive advantages of flow channels in RTM.