Search

To demonstrate the accuracy of fully automated, quantitative, volumetric measurement of the amount of fibroglandular breast tissue (FGT), using MRI, and to investigate the impact of different MRI sequences using anthropomorphic breast phantoms as the ground truth. In this study, 10 anthropomorphic breast phantoms that consisted of different known fractions of adipose and protein tissue, which closely resembled normal breast parenchyma, were developed. Anthropomorphic breast phantoms were imaged with a 1.5 T unit (Siemens, Avantofit) using an 18-channel breast coil. The sequence protocol consisted of an isotropic Dixon sequence (Di), an anisotropic Dixon sequence (Da), and T 1 3D FLASH sequences with and without fat saturation (T1). Fully automated, quantitative, volumetric measurement of FGT for all anthropomorphic phantoms and sequences was performed and correlated with the amounts of fatty and protein components in the phantoms as the ground truth. Fully automated, quantitative, volumetric measurements of FGT with MRI for all sequences ranged from 5.86 to 61.05% (mean 33.36%). The isotropic Dixon sequence yielded the highest accuracy (median 0.51%-0.78%) and precision (median range 0.19%) compared with anisotropic Dixon (median 1.92%-2.09%; median range 0.55%) and T 1 -weighted sequences (median 2.54%-2.46%; median range 0.82%). All sequences yielded good correlation with the FGT content of the anthropomorphic phantoms. The best correlation of FGT measurements was identified for Dixon sequences (Di, R 2  = 0.999; Da, R 2  = 0.998) compared with conventional T 1 -weighted sequences (R 2  = 0.971). MRI yields accurate, fully automated, quantitative, volumetric measurements of FGT, an increasingly important and sensitive imaging biomarker for breast cancer risk. Compared with conventional T 1 sequences, Dixon-type sequences show the highest correlation and reproducibility for automated, quantitative, volumetric FGT measurements using anthropomorphic breast phantoms as the ground truth., (Copyright © 2017 John Wiley & Sons, Ltd.)

Diffusion-weighted MRI (DWI) provides insights into tissue microstructure by visualization and quantification of water diffusivity. Quantitative evaluation of the apparent diffusion coefficient (ADC) obtained from DWI has been proven helpful for differentiating between malignant and benign breast lesions, for cancer subtyping in breast cancer patients, and for prediction of response to neoadjuvant chemotherapy. However, to further establish DWI of breast lesions it is important to evaluate the quantitative imaging biomarker (QIB) characteristics of reproducibility, repeatability, and diagnostic accuracy. In this intra-individual prospective clinical study 40 consecutive patients with suspicious findings, scheduled for biopsy, underwent an identical 3T breast MRI protocol of the breast on two consecutive days (>24 h). Mean ADC of target lesions was assessed (two independent readers) in four separate sessions. Reproducibility, repeatability, and diagnostic accuracy between examinations (E1, E2), readers (R1, R2), and measurements (M1, M2) were assessed with intraclass correlation coefficients (ICCs), coefficients of variation (CVs), Bland-Altman plots, and receiver operating characteristic (ROC) analysis with calculation of the area under the ROC curve (AUC). The standard of reference was either histopathology (n = 38) or imaging follow-up of up to 24 months (n = 2). Eighty breast MRI examinations (median E1-E2, 2 ± 1.7 days, 95% confidence interval (CI) 1-2 days, range 1-11 days) in 40 patients (mean age 56, standard deviation (SD) ±14) were evaluated. In 55 target lesions (mean size 25.2 ± 20.8 (SD) mm, range 6-106 mm), mean ADC values were significantly (P < 0.0001) higher in benign (1.38, 95% CI 1.27-1.49 × 10(-3)  mm(2) /s) compared with malignant (0.86, 95% CI 0.81-0.91 × 10(-) (3)  mm(2) /s) lesions. Reproducibility and repeatability showed high agreement for repeated examinations, readers, and measurements (all ICCs >0.9, CVs 3.2-8%), indicating little variation. Bland-Altman plots demonstrated no systematic differences, and diagnostic accuracy was not significantly different in the two repeated examinations (all ROC curves >0.91, P > 0.05). High reproducibility, repeatability, and diagnostic accuracy of DWI provide reliable characteristics for its use as a potential QIB, to further improve breast lesion detection, characterization, and treatment monitoring of breast lesions., (Copyright © 2016 John Wiley & Sons, Ltd.)

The aim of this study was to investigate the influence of fat-water separation and spatial resolution in MRI on the results of automated quantitative measurements of fibroglandular breast tissue (FGT). Ten healthy volunteers (age range, 28-71 years; mean, 39.9 years) were included in this Institutional Review Board-approved prospective study. All measurements were performed on a 1.5-T scanner (Siemens, AvantoFit) using an 18-channel breast coil. The protocols included isotropic (Di) [TR/TE1 /TE2  = 6.00 ms/2.45 ms/2.67 ms; flip angle, 6.0°; 256 slices; matrix, 360 × 360; 1 mm isotropic; field of view, 360°; acquisition time (TA) = 3 min 38 s] and anisotropic (Da) (TR/TE1 /TE2  = 10.00 ms/2.39 ms/4.77 ms; flip angle, 24.9°; 80 slices; matrix 360 × 360; voxel size, 0.7 × 0.7 × 2.0 mm(3) ; field of view, 360°; TA = 1 min 25 s) T1 three-dimensional (3D) fast low-angle shot (FLASH) Dixon sequences, and a T1 3D FLASH sequence with the same resolution (T1 ) without (TR/TE = 11.00 ms/4.76 ms; flip angle, 25.0°; 80 slices; matrix, 360 × 360; voxel size, 0.7 × 0.7 × 2.0 mm(3) ; field of view, 360°; TA = 50 s) and with (TR/TE = 29.00 ms/4.76 ms; flip angle, 25.0°; 80 slices; matrix, 360 × 360; voxel size, 0.7 × 0.7 × 2.0 mm(3) ; field of view, 360°; TA = 2 min 35 s) fat saturation. Repeating volunteer measurements after 20 min and repositioning were used to assess reproducibility. An automated and quantitative volumetric breast density measurement system was used for FGT calculation. FGT with Di, Da and T1 measured 4.6-63.0% (mean, 30.6%), 3.2-65.3% (mean, 32.5%) and 1.7-66.5% (mean, 33.7%), respectively. The highest correlation between different MRI sequences was found with the Di and Da sequences (R(2)  = 0.976). Coefficients of variation (CVs) for FGT calculation were higher in T1 (CV = 21.5%) compared with Dixon (Di, CV = 5.1%; Da, CV = 4.2%) sequences. Dixon-type sequences worked well for FGT measurements, even at lower resolution, whereas the conventional T1 -weighted sequence was more sensitive to decreasing resolution. The Dixon fat-water separation technique showed superior repeatability of FGT measurements compared with conventional sequences. A standard dynamic protocol using Dixon fat-water separation is best suited for combined diagnostic purposes and prognostic measurements of FGT. Copyright © 2016 John Wiley & Sons, Ltd., (Copyright © 2016 John Wiley & Sons, Ltd.)