Search

Soil water repellency is traditionally expressed as contact angle (CA) and measured destructively on exposed surfaces or derived from flow behavior or measured forces. These approaches cannot map local heterogeneities in CA, which typically exist in intact soil. Here, we explore the potential and limitations of in situ measurements of three-dimensional CAs with simplified benchmark tests and in intact sand. The method is based on a protocol for the freely available OpenFOAM software and applied to segmented X-ray computed tomography (X-ray CT) data. This study scrutinizes its suitability under typical vadose zone conditions, as it was originally developed for rock studies in petroleum engineering. The assets of the method are that it allows for accurate measurement of locally varying, equilibrium contact angles and that they can be linked to pore scale features that cause them. This is demonstrated with rehydrated mucilage structures in sand and the associated change in local CAs, where they touch sand grains. In general, the image acquisition time of polychromatic X-ray CT (minutes) precludes the assessments of dynamic CAs that may equilibrate within seconds. Another limitation is that acute CAs are overestimated due to the voxel discretization of interfaces and contact lines in combination with image smoothing. The divergence arises around 60 degrees and is most severe in the limit of vanishing water repellency. In summary, the method enables the mapping of local heterogeneities of equilibrium CAs, though the absolute values should be critically assessed., Vadose Zone Journal, 21 (3), ISSN:1539-1663

Plant roots and bacteria are capable of buffering erratic fluctuations of water content in their local soil environment by releasing a diverse, highly polymeric blend of substances (e.g. extracellular polymeric substances [EPS] and mucilage). Although this concept is well accepted, the physical mechanisms by which EPS and mucilage interact with the soil matrix and determine the soil water dynamics remain unclear. High-resolution X-ray computed tomography revealed that upon drying in porous media, mucilage (from maize [Zea mays L.] roots) and EPS (from intact biocrusts) form filaments and two-dimensional interconnected structures spanning across multiple pores. Unlike water, these mucilage and EPS structures connecting soil particles did not break up upon drying, which is explained by the high viscosity and low surface tension of EPS and mucilage. Measurements of water retention and evaporation with soils mixed with seed mucilage show how these one- and two-dimensional pore-scale structures affect macroscopic hydraulic properties (i.e., they enhance water retention, preserve the continuity of the liquid phase in drying soils, and decrease vapor diffusivity and local drying rates). In conclusion, we propose that the release of viscous polymeric substances and the consequent creation of a network bridging the soil pore space represent a universal strategy of plants and bacteria to engineer their own soil microhydrological niches where stable conditions for life are preserved. ISSN:1539-1663