Search

The role of apoptosis-associated speck-like protein containing a caspase-1 recruitment domain (ASC) in bone healing remains to be understood. To address this issue, we investigated the requirement of inflammasome-related genes in response to bone morphogenetic protein 7 (BMP7)-induced osteoblast differentiation in vitro. To validate the importance of ASC on osteogenesis, we subjected wild-type (WT) and ASC knockout C57BL/6 mice (ASC KO) to tibia defect to evaluate the bone healing process (up to 28 days). Our in vitro data showed that there is an involvement of ASC during BMP7-induced osteoblast differentiation, concomitant to osteogenic biomarker expression. Indeed, primary osteogenic cells from ASC KO presented a lower osteogenic profile than those obtained from WT mice. To validate this hypothesis, we evaluated the bone healing process of tibia defects on both WT and ASC KO mice genotypes and the ASC KO mice were not able to fully heal tibia defects up to 28 days, whereas WT tibia defects presented a higher bone de novo volume at this stage, evidencing ASC as an important molecule during osteogenic phenotype. In addition, we have shown a higher involvement of runt-related transcription factor 2 in WT sections during bone repair, as well as circulating bone alkaline phosphatase isoform when both were compared with ASC KO mice behavior. Altogether, our results showed for the first time the involvement of inflammasome during osteoblast differentiation and osteogenesis, which opens new avenues to understand the pathways involved in bone healing.

Internalization of hydroxyapatite nanoparticles in SAOS-2 osteoblasts for 2 and 24 h was investigated in vitro using 5 and 50 µg/mL nanoparticles in culture medium. No cytotoxic effects were observed in a PrestoBlue viability assay. Focused ion beam-scanning electron microscopy and transmission electron microscopy were used to study nanoparticle trafficking inside cells and to characterize the physicochemical properties of the remodeled nanoparticles. Nanoparticles were actively internalized by cells and maintained in intracellular membrane-bound compartments. Dissolution of hydroxyapatite nanoparticles was observed inside phagolysosome in all samples. After 24 h of internalization in cell culture assays, reprecipitation of calcium phosphate minerals was observed in membrane-bound compartments in 5 and 50 µg/mL samples. Compared to the original nanoparticles, the reprecipitated calcium phosphate phase presented a different morphology, structure, and chemical composition. Two sample preparation methods were used and confirmed that reprecipitation of the calcium phosphate crystallites occurred in the intracellular environment and not during electron microscopy sample preparation. Reprecipitation of calcium phosphate prevented the release of large amounts of calcium and phosphate ions inside the cells. This phenomenon may be linked to physiological processes in the cell that control the concentration and trafficking of intracellular calcium ions, which are highly controlled by cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 428-439, 2018.

Various synthetic bone substitutes have been developed to reconstruct bone defects. One of the most prevalent ceramics in bone treatment is hydroxyapatite (HA) that is a useful material as bone substitute, however, with a low rate of biodegradation. Its structure allows isomorphic cationic and anionic substitutions to be easily introduced, which can alter the crystallinity, morphology, biocompatibility, and osteoconductivity. The objective of this study was to investigate the in vitro and in vivo biological responses to strontium-containing nanostructured carbonated HA/sodium alginate (SrCHA) spheres (425

Hydroxyapatite (HA) is largely used as bone graft; it seems to be the most promising synthetic implant material, mainly because of its excellent biocompatibility. The crystallinity, particle and pore size of HA are important characteristics and can be modified by decreasing basic structural form below 100 nm and have evoked a great amount of attention for improving prevention, diagnosis, and disease treatment, besides improving bone repair through the biodegradation of the material. The aim of this study was to investigate bone mineral content in bone samples with nanohydroxyapatite and HA spheres, specially its spatial distribution on bone microarchitecture. Circular bone defects were made in both tibiae of 12 White New Zeland adult rabbits (Oryctolagus cuniculus) and were divided randomly into five groups – blood clot (control group), sintered HA, non-sintered HA, sintered nanoHA and non-sintered nanoHA – all materials in spherical shape, to smooth handling and accommodation of the surgical bed, and to minimize inflammatory response. The rabbits were euthanatized according to the experimental period of 1 and 4 weeks after surgery. The samples were evaluated by polarized microscopy as well as X-ray microfluorescence in order to account the bone mineral content bone-implant interfaces, through synchrotron radiation. Our results revealed greater newly formed bone area in the non-sintered materials and control groups, and the used technique showed that the amount of calcium of new bone was consistent with both mature bone and HA spheres. In conclusion, the present findings suggest that HA-based biomaterials are biocompatible, promote osteoconduction and favored bone repair. Copyright © 2011 John Wiley & Sons, Ltd.

In this work, the in vitro behavior of human osteoblast cells on the undulated surfaces of biphasic calcium phosphate tablets was investigated. The tablets were produced by uniaxial pressing with convex cylindrical undulations occupying only half of the surface area; the other half was flat. Chemical and physical characterization was performed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). XRD and FTIR analyses revealed the presence of hydroxyapatite (HA) and alpha-tricalcium phosphate (alpha-TCP) in a well-defined ratio. Moreover, microtopography, evaluated by SEM and AFM, was similar on the flat region and on that with undulations. However, surface undulations induced different cellular arrangements, confirming the influence of the macrotopography on the cells orientation.

Porous hydroxyapatite (HA) has already been widely used as a bone substitute due to its similarity with the mineral part of the bone. In this work, cylindrical tablets with micro and macro porosity were produced from stoichiometric and deficient hydroxyapatites by using naphthalene as porosifier agent. The influence of the processing parameters such as Ca/P ratio of start material, calcination temperature, and naphthalene content on the characteristics of porous calcium phosphate tablets was evaluated. Three mineral phases-HA, alpha-TCP (alpha tri-calcium phosphate), and beta-TCP (beta tricalcium phos-phate)-with variable contents were identified by x-ray diffraction (XRD) and Fourier-transformed infrared spectroscopy (FT-IR). Image analysis and density measurements were used to characterize sample porosity. As expected, the total porosity of the calcinated material is not dependent on the stoichiometry of the precursor hydroxyapatite. For calcium-deficient hydroxyapatite, the increase in naphthalene content contributes to stabilize alpha-TCP phase, altering the relative phases content.

Calcium phosphate granules were produced through the calcination of three hydroxyapatites (HAs) at 1150 degrees C: nearly-stoichiometric (NS-HA), calcium-deficient (CD-HA), and carbonated (Carb-HA). The characterization using scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier-transformed infrared spectroscopy (FT-IR) showed that those granules exhibit strong differences in chemical composition, surface texture, and dissolution behavior. Sample dissolution in a simulated body fluid (SBF) and precipitation of a calcium phosphate layer on the granule surface were followed up for 7 days by chemical analysis of calcium content in SBF. After 80-min reaction, precipitation of new calcium phosphate phases predominates over the dissolution of original granules. Comparison between SEM images and XRD/FT-IR analysis revealed that the composition of the calcium phosphate layer and its precipitation rate depend on the HA composition and its heat treatment. Calcined carbonated apatite induces the precipitation of an octacalcium phosphate (OPC) layer, whereas a carbonated apatite layer is formed from calcined-deficient HA. The calcined nearly-stoichiometric HA exhibits low efficiency in producing carbonated apatite layer.

Hydroxyapatite coatings are commonly applied to metallic biomedical implants to accelerate osseointegration. These coatings, usually produced by plasma spray techniques, can be obtained by alternative processes, like biomimetic process, electrolytic deposition, or electrophoretic process as well. Electrophoretic deposition of hydroxyapatite exhibits several advantages like simplicity and low cost. In this article, titanium sheets with three different surface finishing were coated with hydroxyapatite by using electrophoresis. Surface treatments include: (1) abrading with SiC paper; (2) abrading with SiC paper plus electrolytic etch with H3PO4 solution; and (3) blasting with alumina powder followed by etch with a solution containing H2O2 and HF. Stoichiometric hydroxyapatite was used to coat titanium sheets. Blasted samples were also coated using a calcium-deficient hydroxyapatite. SEM, XRD, and FTIR were employed to characterize titanium substrates and coatings produced. Results show that electrophoretic process can produce a uniform thin layer, satisfactorily adhered, of hydroxyapatite on treated titanium samples. Furthermore, sintering at 800 °C do not promote the decomposition of calcium-deficient hydroxyapatite. © 2002 Wiley Periodicals, Inc. J Biomed Mater Res 60: 1–7, 2002

Summary In this work we use paramagnetic defects induced by radiation in the fruit pulp to identify gamma-irradiated kiwi, papaya and tomato. Pulp without seed, peels or stalks are treated by alcoholic extraction in order to remove water, soluble fractions and solid residue. The ESR spectra of pulp samples of irradiated fruit is composed of species A (g = 2.0045) and species C (g = 2.0201 and g = 1.9851), which are also observed in irradiated stalks and skins. In comparison with samples which are not submitted to alcoholic extraction, species C is stable enough to be used as a dose marker. Furthermore, the species C signal can be detected perfectly even in pulp samples irradiated with doses as low as 200 Gy. Irradiation doses of fruit, exposed to 200–900 Gy of a gamma rays, were estimated with an overall uncertainty of 15% using dried pulp samples. These results indicate that radicals induced in pulp have potential to be used in the identification and absorbed dose determination of irradiated fruit.