Search

Objectives: To evaluate the effect of preheating glass-ionomer cement (GIC) restorative materials on stabilization time (ST) of their metal carboxylate bonds and on microhardness., Methods and Materials: Two conventional high-viscosity GICs, Ketac Universal (3M ESPE) and Equia Forte (GC), were evaluated. The thermographic camera was used to measure the temperature inside the glass-ionomer cement capsules before and after heating. The preheating of capsules was performed at 54°C for 30 seconds in a commercial device. Characterization of ST in the GICs was determined by Fourier Transform Infrared (FTIR) spectroscopy. For this, 10 samples of each material were prepared, five in the non-preheated group (control) and five with preheating. FTIR spectra were obtained 10 minutes after mixing (control group) or after heating and then every 10 minutes for 120 minutes. For the microhardness test, 20 cylindrical specimens (3 mm height x 6 mm diameter) were prepared for each material (10 preheated, 10 control). The microhardness was determined at three time intervals: 10 minutes after mixing, after the ST as detected through the FTIR part of the study, and after one week. Knoop microhardness was assessed using a diamond indenter with a 25 g load and 15 seconds dwell time., Results: Ketac Universal showed an increase in temperatures of 15.7°C for powder and 3.6°C for liquid, while Equia Forte showed 16.4°C for powder and 8.5°C for liquid. FTIR spectra indicated that preheating reduced the ST for Equia Forte but increased it for Ketac Universal. Preheating increased the initial microhardness (T1) of Equia Forte. With maturation over one week, it was observed that preheating significantly improved the microhardness of both materials compared with the control specimens., Conclusion: Preheating influenced the ST and the microhardness of Ketac Universal and Equia Forte. The ST and microhardness of Ketac Universal increased after seven days, whereas Equia Forte showed a reduced ST and increased microhardness from the outset., (©Operative Dentistry, 2021.)

Objectives: To characterize the chemical interactions and analyze the interface of adhesive systems containing 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) and N-methacryloyl glycine (methacrylamide) functional monomers with the dentin in noncarious cervical lesions (NCCLs) compared with artificial defects (ADs)., Methods and Materials: Twenty human teeth with natural NCCLs on the buccal surface were used. Class V cavities, similar to NCCLs, were created on the lingual surface to serve as controls. Teeth were randomly allocated to two groups according to the functional monomer in the adhesive (N=10): G1, 10-MDP; and G2, methacrylamide. NCCLs and ADs were characterized by their mineral composition (MC) and degree of demineralization (DD) using micro-Raman spectroscopy, adhesive/dentin chemical interactions (CIs) were assessed with infrared photoacoustic spectroscopy, and interface morphology was evaluated with scanning electron and light microscopy. MC, CI, and DD data were submitted to Shapiro-Wilk and Student t-tests ( p<0.05)., Results: Compared with ADs, dentin in NCCLs was hypermineralized ( p<0.05). In G1, CI, and DD in the first 2 μm, and adhesive projections in NCCLs and ADs interfaces were similar. Additionally, a thin layer of dentin collagen was observed in ADs, while it was hardly present in NCCLs. In G2, although CI could not be identified, changes in the mineral components were observed. The DD in the ADs and NCCLs were statistically similar, while SEM showed a lack of adhesion at NCCLs interface. DD and collagen exposure in the ADs and NCCLs were more pronounced than in G1., Conclusions: Results suggest that the G1 adhesive could be applied directly on the superficial sclerotic layer in NCCLs. In contrast, previous cavity preparation should be conducted to improve the micromechanical interaction of G2 with the dentin.

The purpose of this study was to evaluate the chemical bonds of a self-etch 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) adhesive to natural noncarious cervical lesions (NCCLs) and compare them with those occurring in sclerotic dentin in artificially prepared defects (APDs). Four human teeth with natural NCCLs on the buccal surface were selected. Artificial defects matching the natural lesions were prepared on the lingual surface of the same teeth serving as control. Micro-Raman (MR) spectroscopy was used to quantify mineral content in natural NCCLs and in APDs. Fourier transform infrared-photoacoustic spectroscopy (FTIR-PAS) readouts were taken before and after adhesive application to analyze the protein matrix/mineral (M:M) ratio and chemical interactions between 10-MDP adhesive and dentin. The MR and FTIR-PAS spectra collected from natural NCCLs demonstrated a larger area of the band (961 cm -1 , PO 4 ) and lower M:M ratio, respectively, characterizing a hypermineralized dentin, compared with APDs. FTIR-PAS demonstrated emergence of a peak (1179 cm -1 , P=O) in spectra after adhesive treatment, demonstrating a more intense chemical interaction in natural NCCLs. The results demonstrated that chemical bonding of 10-MDP adhesive to natural NCCLs is more intense, due to the hypermineralized surface, and suggest that it is unnecessary to remove the hypermineralized layer with burs, as this may decrease the chemical bonding potential of 10-MDP.