Search

Molecular dynamics simulations are used to study the dissociation inhibiting mechanism of lecithin for structure I hydrates. Adsorption characteristics of lecithin and PVP (poly (N-vinylpyrrolidine)) on the hydrate surfaces were performed in the NVT ensemble at temperatures of 277K and the hydrate dissociation process were simulated in the NPT ensemble at same temperature. The results show that hydrate surfaces with lecithin is more stable than the ones with PVP for the lower potential energy. The conformation of lecithin changes constantly after the balanced state is reached while the PVP molecular dose not. Lecithin molecule has interaction with lecithin nearby and hydrocarbon-chains of lecithin molecules will form a network to prevent the diffusion of water and methane molecules, which will narrow the available space for hydrate methane and water movement. Compared with PVP-hydrate simulation, analysis results (snapshots and mass density profile) of the dissociation simulations show that lecithin-hydrate dissociates more slowly.

Type-I clathrates have been considered as very promising thermoelectric (TE) materials thus attracting attention widely. Here we report new clathrates Ba8CuxSiyGe46-x-y (4≤ x ≤ 6.5, y = 0 and 5.15 ≤ x ≤ 6.425, 2.05≤ y ≤ 36.9), focusing on their phase purity and TE properties. Our results show that samples prepared by arc melting followed by annealing are multi-phases alloys. The composition of the clathrate phase is also inhomogeneous. This indicates that the kinetic factor dominates the reaction of forming the clathrate phase during element-melting and sample-annealing. We select three compositions in these two series of samples, which have less impurity and better composition homogeneity for the clathrate phase, and the annealed alloys are furthered processed by ball milling (BM) and powder-solidification (either by hot pressing (HP) or by spark plasma sintering (SPS)) for TE properties investigations. The BM and HP/SPS processes can improve the phase purity and homogeneity. The TE measurements show that the Si-substituted samples have better performance than the Ge-based sample, mainly by decreasing the electrical resistivity. This indicates that the elemental substitution may be still an effective way to improve the TE performance of clathrates.

Low price of wheat starch as a wide range of sources of edible film substrate, glycerol as a plasticizer, pullulan as a film-forming agent, prepared by solution casting of wheat starch-based edible green packaging materials. Tests were run on wheat starch-based edible films to determine mechanical properties, transparency and color evaluation. It was observed that the increase of the glycerol content in the wheat starch films increased the macromolecular mobility, the wheat starch films became less stiff and more flexible. Meanwhile the transparency and yellow index are both increased, obviously.

Low price of potato starch as a wide range of sources of edible film substrate, glycerol as a plasticizer, pullulan as a film-forming agent, prepared by solution casting of potato starch-based edible environment-friendly packaging materials. Tests were run on potato starch-based edible films to determine mechanical properties, transparency and color evaluation. It was observed that the increase of the glycerol content in the films increased the macromolecular mobility, the potato starch films became less stiff and more flexible. Meanwhile the transparency and yellow index are both increased, obviously.

To estimate the influences of uncertain factors on the modeling error of maglev vehicles, the single electro-magnet is taken as the object in this paper. Researches on the model-building error are carried out, including factors of the uncertainty of the inductor, the elasticity of the guideway and the coupling between Modules. Also, the model-building errors are analyzed numerically from the view of L∞ norm. And the calculation results are presented, which shows severe model-building severe error with the simplified model. The results are revelatory to comprehend the phenomena of the vehicle’s vibration, and to search after new methods of levitation control for EMS maglev vehicles.

Nanostructured Ba-Cu-Si clathrate powders were synthesized by mechanical milling using different amounts of process control agent (PCA). We investigated systematically the effects of PCA on the phase constitution and crystallite size of nanopowders using X-ray diffraction (XRD) as well as the particle size and morphology by scanning electron microscopy (SEM). The PCA increases the powder yield by reducing the powder agglomeration. No detectable reaction occurred between the PCA and the clathrate phase, and thus the composition of the clathrate phase is unchanged after milling. Compared to the powders milled without PCA, the crystalline size of powders with PCA is reduced from about 70 to about 50 nm.

The power energy storage in battery transfers to capacitors through thyristor in hybrid energy storage, which makes the instantaneous power amplified. As the switch in Hybrid energy storage, the thyristor must satisfy its opening requirements , besides, the characteristics of the hybrid energy storage system is considered to design the width of trigger pulse, otherwise the thyristor can’t be opened that leads to failure of energy transfer. In this paper, the model of the system is established, the function of current to time is derived from the model, and then the minimum width of trigger pulse is calculated out. The simulation and experiment results are presented, which match with the designation well.

In this paper, the sensing principle of a B-dot probe to measure the armature position was analyzed. The output waveforms of the probe for two different orientations were given after mathematical deduction. An electromagnetic launching experiment was conducted, and the result shows that the output waveforms of the probes can present the velocity trend of the armature. After data fitting, the velocity of the armature moving in the bore was given, and combined with the waveform of the muzzle voltage, the muzzle velocity was obtained, which matched the measurement result by a high speed camera well.

In this paper, a kind of Linear Synchronous Motor (LSM) with Permanent Magnet (PM) arranged in Halbach array and IronLess Coil (PMH&ILC) is presented for Magnetic Levitation Vehicles (Maglev). First, the propulsion force of this kind of LSM is deduced analytically. Then, the influences of pole spacing, the current in the coil, the width of the motor and the size of the Halbach array on the propulsion force are analyzed mathematically in detail. Based on the results, the design method and basic principle of PMH&ILC-typed LSM are proposed, which shows a better performance with small pole spacing, higher permanent magnet array, optimal value of the width of the permanent magnet Halbach and so on. Finally, a sample LSM system is designed according to the requirements of Maglev propulsion system.

Basing on governing Maxwell and energy equation of rail gun considering armature movement in two dimension, The total domain to be solved is divided into two subdomains: moving (armature) part and static (rail) part, finite element formulations of two subdomains are built independently, then using the interface condition of two subdomains, formulations are connected by coupled equation which is derived out by penalty method. Shifted physical quantity is used to simulate movement. The final magnetic-thermal coupled fields finite element formulations of rail gun are established by these methods. Numerical calculation results compared by theoretical and other numerical results verify that penalty method is an effective way to deal with electric sliding contact problem associating with Shifted physical quantity method.

Specimens were prepared using iron-rich magnesia (3~1 mm、≤1 mm) and high purity magnesia (≤0.088 mm) as the main starting materials, adding tabular alumina at different size (3~2、2~1、≤1 mm) and content:3%、6%、9%、12%、15% to discover the influence of tabular alumina on sample performance. Phase composition and microstructure were also analyzed. The results show that specimen with content of 6% of corundum possessed the best comprehensive performance:apparent porosity 17%, bulk density 2.95 g·cm-3, cold crushing strength 74 MPa, refractoriness under load 1700 °C, heat shock resistance of up to 18 times. The formations of magnesium aluminate spinel and hercynite solid solution were enhanced by Fe ion at high temperatures in the iron-rich magnesia-corundum system at the presence of iron oxides, which are able to largely dissolved in periclase.

To improve the wear properties of AZ91D magnesium alloys, a AlFeCuCoNiCrTi1.5high entropy alloy (HEA) coating was fabricated on AZ91D magnesium alloys by laser cladding using mixed powders of Al, Fe, Cu, Co, Ni, Cr, and Ti. The microstructure of the HEA coating was characterized by OM, SEM, and XRD. The wear resistance of the HEA coating was evaluated under dry sliding wear test condition at room temperature. The results show that the HEA coating mainly consists of a simple BCC solid solution phase. The HEA coating exhibits excellent wear resistance. The main wear mechanisms of the HEA coating and the AZ91D substrate were different, the former dominated by oxidative abrasive wear and the latter suffered from both adhesive and abrasive wear.

This paper proposes a new method of applying nonbinary network coding in wireless broadcast network. This network consists of T(T>2) users who receive common information independently from a common base station (BS). We assume that the transmission blocks are subject to block-fading with independent fading coefficients for each block, nonbinary network codes over finite fields are used on top of channel codes.We take two kinds of schemes, with ACK and without ACK, into consideration. In the first situation while considering ACK mechanism, the forward error correction (FEC) and retransmitted techniques are used and network code (NC) can diminish the retransmit count significantly. In the second situation while utilizing broadcast nature without ACK, the NC could help to rebuild losing packets, thus decrease block error ratio.We analyze the delay performance and block error ratio, and verify the analytical performance with simulation. Both simulation and analysis confirm the advantage of proposed scheme.

Indoor air quality in a public transport interchange station in rush hour has been studied. Carbon monoxide is selected as the main pollutant for description of air quality. Ventilation systems, bus traffic and passenger flow, air quality have been investigated by on-site survey. Large eddy simulation technology has been used to analyze indoor air quality of public transport interchange station. The boundary conditions are determined according to the measured date. Indoor air quality results at heights of 0.8m and 1.6m in rush hour and two operating conditions of public transport interchange station are calculated. Results have shown carbon monoxide concentrations at height of 0.8m are higher than those at height of 1.6m. Air quality would reach the harmful degree within 5min to 10min if the ventilation system is not operating. The ventilation system should be operated continuously during the peak hour in order to meet the requirement of indoor air quality standards.

Utilizing the wind power in high altitude to generate electrical power has significant meaningful while the pollution of environment of the planet is becoming worse and worse. Wireless aerial surveillance platform is very important to military surveillance, while present method costs too much. To meet the requirements mentioned above, a long-endurance multi-function floating platform is proposed in this paper. The long-endurance multi-function floating platform mainly consisted of four parts: the floating platform, the ground control base, the control box and the controller. Fuzzy-PID is used to control the movement of the rope, which connects the floating platform and the ground control base. A control strategy is made to reduce energy consumption of this system. A real system was built to demonstrate the feasibility of this paper.

Due to the ability of the strong anti-interference and directly digital controlling, digital valve has great applications and developing potential in the filed of high frequency response digital servo valve. Base on the rotating structure, a novel high frequency digital valve which can be rotated and controlled in differential parallel way is designed, and the frequency characteristic of electrical signals converting into rotation signals is developed through differential and parallel control of valve spool and valve sleeve. Meanwhile, the hydraulic natural frequency of servo-screw mechanism is further enhanced by the control way of hydraulic half-bridge type A in both chambers of valve spool, and corresponding mathematical model and control block diagram are built. Theoretical analysis concludes that the frequency response characteristic of digital valve is developed significantly. In addition, the multi-gain of rotation angle and axial displacement of valve spool is realized through milling the spiral grooves with different helix angles in the inside of valve sleeve, which improves the flow adaptability of high frequency digital valve effectively. Compared to traditional rotary digital valve, the designed novel digital valve that can be controlled by rotating differentially and parallel has greater advantages in high frequency response and flow adaptability, it provides a new scheme for engineering applications of high frequency digital valve.

Energy is the base of modern industrial economy. Basing on the data of cities and industries in Guangdong from 2000 to 2013, this paper analyzes the relationship of energy intensity, FDI and industrialization by regression model. The results show that the industrialization levels of the cities in Guangdong are in accordance with their energy consumption and economic conditions, and Guangdong should focus on the development of “win-win” industries which both increasing industrial output and reducing energy efficiency.

To improve the wear properties of AZ91D magnesium alloys, a Cu0.9NiAlCoCrFe high entropy alloy (HEA) coating was fabricated on AZ91D magnesium alloys by laser cladding using prealloyed Cu0.9NiAlCoCrFe powders. The microstructure of the HEA coating was characterized by OM, SEM and XRD. The wear resistance of the HEA coating was evaluated under dry sliding wear test condition at room temperature. The results show that the HEA coating mainly consists of a simple BCC solid solution phase. The HEA coating exhibits excellent wear resistance. The main wear mechanisms of the HEA coating and the AZ91D substrate were different, the former dominated by oxidative abrasive wear and the latter suffered from both adhesive and abrasive wear.

The review focuses on the progresses of air microbes in indoor environment, including their sources, sorts, influence of human body health, spread regulation and spatiotemporal distribution characteristics. Most airborne microorganisms attached to the dust particles, which is present in the air in the form of aerosol .The distribution of microbe is related with indoor environment condition in the air. The factor which influences it to distribute mainly includes temperature, degree of humidity, wind velocity and weather condition etc. Air microbe is bred easily in ventilation and air conditioning system. The growth of microbe has a tremendous relation with the ventilation and air condition. The distribution of microorganisms in different regions, different buildings and different ventilation system is different from each other.

The microhardness and microstructure of Ti-24Al-15Nb-1.5Mo/TC11 dual alloy joining interface processed by different heat treatment regimes were investigated. The results show that the microhardness of the weld zone and Ti-24Al-15Nb-1.5Mo alloy side of the dual alloy processed by gradient heat treatment are higher than that of the specimen processed by balance heat treatment. Moreover, the microstructure differences between the specimens processed by gradient heat treatment and balance heat treatment are very obvious, particularly in the interface between the TC11 alloy and the weld zone. While the joining interface is processed by gradient heat treatment, the microstructure change homogeneously, and the demarcation lines are ambiguous. However, for the joining interface processed by balance heat treatment, the demarcation lines are very obvious, and the microstructure of the TC11 alloy side is bi-morphic, the lath is short and coarse. Therefore, the interface integrity of the dual alloy processed by gradient heat treatment is better, which is an adoptable method to improve the properties of the dissimilar alloy joining interface.

The uprighting process of capsized vessel based on considering the buoyancy and stability of wreck was studied in this paper. The model of the righting force for the wreck salvage was established according to the mechanical characteristics of wreck. The analysis and calculation were demonstrated by the salvage module of GHS software in view of the problem of righting force programme, which need long computing time and large amount of data input. Take the simulation of righting a capsized yacht as an example, the three-dimensional model was established and the righting process was simulated via GHS software, the maximum righting force and the occurring phase, angle of vanishing stability and longitudinal distribution of torque values can be obtained from the analysis. And the results can play a crucial role in the uprighting process of a capsized ship. The uprighting process of inclining ship can be simulated by using the GHS software, which is suitable for making salvage scheme.

Coal mine roadway deformation have a significant impact on coal mine production. Based on the Arduino microcontroller system and ultrasonic distance sensor, through temperature compensation and system fixes, designed a roadway deformation monitoring system which is high accuracy, low price and simple operation. Monitoring results through the LCD display, and SD card for data storage, the system achieved real-time monitoring of roadway deformation. The system was actually tested in coal mine, and achieved good monitoring results.

In this paper, mainly research the surface soil heavy metal pollution in cities. First of all ,we find out the spatial distribution of eight kinds of main metal elements in the urban; we adopt the improved gray model to establish evaluation system about urban pollution heavy metal element degree, and then to evaluate the pollution degree of heavy metal element in the city area. Eight heavy metals have been in dimension reduction by means of correlation analysis and principal component analysis, comprehensive variables can be got. By calculating the rotating component matrix, we got objective reason of metal contamination. We analyzed transmission characteristics of heavy metal pollutants and build model to determine the location of the pollution sources. We introduced the field theory the basic assumption , calculated various factors which lead to the change of one point of concentration. The differential equation model can be got which reacted geological environment evolution mode through the mass conservation. Finally we determine the location of the pollution sources and the evolution of the urban geological environment mode.

The traditional methods for the prediction of fatigue life of metallic material consider only the two processes of fatigue initiation and fatigue cracking, while the process from fatigue cracking to breaking has been neglected. This paper provides one new method of estimating the fatigue life of under-constant-amplitude loading spectrum---non-local gradient damage enhancement model method. Based on the finite element procedure and the partial damage model, this method inserts the non-local strain's definition formula into the loading function and damage rate increment formula. From this method, the non-partial gradient enhancement damage model is obtained. In this model, the material’s microscopic criterion factor and the material’s damage criterion have been considered, the process of endurance failure is also considered. Thus, the insufficiency of traditional research techniques is effectively avoided, the actual effect analysis of metallic material is more reasonable, and the actual operating mode is been conformed to.

Feature selection is an important process to choose a subset of features relevant to a particular application in document classification. Those terms which occur unevenly in various categories have strong distinguishable information as to categorization. Firstly, based on the categorical document frequency probability (CTFP), a CTFP_VM feature selection algorithm was designed for feature selection. Secondly, a maximum term frequency conditional distribution factor was proposed to improve the CTFP_VM criterion further. We perform the document categorization experiments on SVM classifiers with the well-known Reuters-21578 and 20news-18828 corpuses as unbalanced and balanced corpus respectively. Experiments compare the novel methods with other conventional feature selection algorithms and the proposed method achieves the excellent feature set for document categorization.

More and more dual arm robots with redundant manipulator are introduced in industrial fields. Here we focus on this special structure with 7-DOF redundant manipulator, an exhibit analytical and optimal concept was proposed. The formula derivations of inverse kinematics showed that when the redundant joint angle has been obtained, the remaining six joint angles can be derived analytically, and there are eight sets of inverse solution for one giving redundant joint angle. Reversed thinking the joint movement habits, patterns, and frequency of human arm operations, an optimal concept was presented to gain a real time computational efficiency of a direct inverse solution while also achieving the purpose of application.

Medical image registration is the important technique in the clinical medicine field. A novel hierarchical registration method of the medical images based on multiscale information and contour line is proposed in the paper. At First, contour lines of the couple images are extracted based on the edge features obtained by Canny operator, and contour lines of the couple images are resample in order to reduce the calculation cost in the registration process. Secondly, the Principal Axes method is used to accomplish the rough registration based on the resampled contour lines. Thirdly, multiscale image serials obtained by down-sample transform are used to accomplish the couple images fine registration. Experiment results show that the method not only can achieve more accurate registration results, but also can reduce the computational time greatly. The accurate registration results also can be achieved in the noisy environment.

A new type mechanism of anti-loosening bolt has been developed on the basis of the recovery characteristics of Fe-Mn-Si shape memory alloy. Based on that, Fe-Mn-Si shape memory alloy (SMA) anti-loosening bolt was processed, and its loose torque was increased by axial and radial restoring force generated in the process of heating. The anti-loosening experiment of the Fe-Mn-Si SMA bolt matching the common nut shows that the loose torque of pre-strain bolt increases with the increment of temperature, when the temperature is up to 500°C, the loose torque is 3 times than that of common bolt, which fits in with the characteristics of Fe-Mn-Si SMA phase transition; According to the failure criterion of fasteners, 80% decrease of loose torque, the vibration failure time of Fe-Mn-Si SMA bolt is 7 times than common bolt, so its anti-loosening effect is remarkable.

In vitro test was used to determine the effect of acid stress on soil nematode (Meloidogyne incognita) J2 survival, behavior, individual development and fluid extravasations. The effects of acid stress on J2 survival is C2H2O4>C6H8O7>C4H6O5. Inhibition on J2 movement behavior increased with time prolonged. Effect on nematode body length, stylet length, tail transparent area length, body fluid extravasations: C2H2O4>C6H8O7>C4H6O5. At high magnification optical microscope can be clearly observed symptoms of poisoning J2. Compared with the control, acid inhibited the nematode survival, movement and individual development, promote the body fluid extravasations, destroyed the normal physiological metabolism of nematodes, even lead to death.

According to the sap flow characteristics and photosynthetic characteristics of Haloxylon ammodendron and Tamarix, we measured the sap flow with the method of thermal diffusion. To monitor photosynthesis with application the instrument CI-340, and the result shows that: (1)The daily net photosynthetic rate change of Haloxylon ammodendron is a typical double peak type, and Tamarixs is a single peak type; (2)The daily transpiration variation of Haloxylon ammodendron is similar to net photosynthetic rate change rule, it has a phenomenon which we called noon break, Tamarixs isnt obvious, it presents volatile changes slightly; (3)The daily sap flow of Haloxylon ammodendron is a typical double peak type, Tamarixs isnt obvious, it presents volatile changes slightly, and at sometimes the sap flow of branches is greater than the breasts. The results provide some supports for ecological water demand of the plants. It has some significance for ecological environment construction of the Gurbantunggute Desert.

In this paper, a certain type of vehicle missile launching system is the research object, which uses CAE technology to make a flexible coupling system dynamics simulation and analysis to provide a reference for similar tests. Since the complex structure of the vehicle missile system, reasonable assumptions and simplifications are made in establishing the dynamics model. Pro/E is used to build the three-dimensional model, and then it is imported to the ABAQUS to establish its dynamics model. Finally, in a complete virtual prototyping system model, we make a simulation of working conditions, and draw conclusions and analysis. The results show that the use of independent dynamics rigid-flexible coupling model dynamics simulation based on ABAQUS can be more realistic simulation of the process of vehicle missile launch, and it verifies the results of different working conditions, which provides a reference for the vehicle missile launching systems simulation .

The effect of processing parameters on the welding deformation of 304 stainless steel plates with different thickness were studied by using the pulsed Nd: YAG laser welding progress. Single factor experiment was used in this study. The results show that, in a certain range of parameters, the vertical deformation increases with the increment of the welding current, and decreases at the beginning and then increases with increment of the pulse duration and pulse frequency. However the increment rate of welding deformation decreases while the current value goes up. The welding deformation trends of the 304 stainless steels with different thickness stay the same in a certain range of processing parameters in terms of data collected from the experiment.

The mechanical strengths of self-compacting concrete (SCC) with different strengths and different fibers were investigated. By mechanics performance testing on concrete samples, it shows that the fiber can significantly reduce strength of the self-compacting concrete during curing period. The 28d tensile strength of self-compacting concrete can be improved when steel fiber, polypropylene fiber, or polyethylene fiber were used. Moreover, steel fiber can improve the 28d compressive strength; contrarily, polypropylene fiber and polyethylene fiber can reduce the 28d compressive strength.

Using laser cladding method, the coating of Fe-Mn-Si shape memory materials (SMM) was prepared on the surface of AISI 304 stainless steel. The microstructure and microhardness of SMM laser cladding coating were measured by using a metallographic microscope and a scanning electron microscope, respectively. The phase composition was determined by X-ray diffraction. The wear resistance was evaluated on a high speed reciprocating friction tester. The results show that microhardness of the SMM coating is about Hv263, higher than that of the substrate (Hv225); the SMM coating is composed of ε-martensite and γ-austenite phases; the average friction coefficient of the substrate and SMM coating is about 0.85 and 0.71; the SMM laser cladding coating is of excellent wear resistance validated by friction coefficient, worn-out appearance and wear loss.

Single probe and dual probes are always taken adopt to measure the material's thermal conductivity and thermal diffusivity. The measurement principle of the two kinds of probes is different and introduced in this article. Taken the material which has low thermal diffusivity for example, the single probe and dual probes are compared by the calculation accuracy and temperature response sensitivity. Numerical simulation results show that, under the same conditions, the thermal properties obtained by the dual probes are closer to the true value for the test material, but single probe has more sensitive at temperature response.

AISI 304 stainless steel powder and Al2O3 powder was used to produce laser cladding composite coatings in order to improve the surface wear resistance of 45 steel. Microstructure of the composite coating was examined and analyzed by metallographic microscope. Microhardness and wear resistance of the composite under different scanning velocities were evaluated. The results show that the composite coating is composed of planar crystal, cellular crystal, dendritic crystal and fine equiaxed; the composite coatings under different technological parameters are made of the same phases, ferrite (α) and austenite (γ) phases. Microhardness of the composite is enhanced along with the increase of scanning velocity; effect of scanning velocity on wear loss of the composite coatings is not significant.

This study has focused on the nitriding of 38CrMoAl steel by hollow cathodic auxiliary plasma nitriding. Nitriding time, temperature and potential of sample were chosen as the influencing factors of orthogonal experimentation. Also, the optimum technological conditions were determined. The testing results showed that the micro hardness of nitriding layer under the best technology of orthogonal experimentation rose noticeably which was 4 to 5 times higher than that of before. Besides, surface roughness of the plasma nitriding sample was as the same as that of before. What is more, there was a 3-μm-thickness white layer in the surface of nitriding sample which comprised ε and γ' phase, and the whole depth of nitriding layer reached 300 μm.

The microstructural evolution behavior of Mg-3Si-1.70Sn alloys during semisolid isothermal heat treatment was investigated by optical microscopy observations in the present study. With the holding time increasing, the grains evolve to be more spheroidal and 15min is adequate for the alloy to be spheroidized, after this coarsening begins to happen. The amount of the liquid islands inside α-Mg grains decreases and that of the liquid phase at the grain boundaries increases with the prolonged holding time. Moreover, the morphology of eutectic Mg2Si phases changes from the Chinese script and/or long-fiber shape to short fiber or spherical shapes during semisolid isothermal heat treatment, which can be attributed to the Rayleigh shape instability.

Since the original Adaboost algorithm is very time-consuming in training, we have designed an improved Adaboost, which adds a process of feature selection to the original Adaboost algorithm. After each round of training, we retain the features whose error rate to classify the samples are relatively low and remove the features with high error rate. In this way the time for the next training is reduced, and the whole algorithm is accelerated.

The article through to free vibration column experiment research to soft soil of Binhu new district of Hefei, The data and curves are given for four types of soil dynamic shear modulus and damping ratio with shear strain and draw rules of different size of confining pressure on the dynamic shear modulus and damping ratio of soil. For hefei binhu new area soft soil of the physical and mechanical characteristics, select the optimal soft foundation treatment scheme, practical design calculation model is set up, and perfect the construction technology measures, the article has some reference value.

Colorless fluorescent ink has certain anti-counterfeiting function. In this paper, fluorescence curve and spectral properties of the fluorescent ink with colors of fluorescent red, fluorescent blue and fluorescent green used for screen printing are tested. Besides, rheological properties of fluorescent inks such as viscosity and thixotropic behavior are shown in the paper.

The methods for determining optimal policies are core problems in the standard secretary problem. The optimal policies are based on the hypothesis of complete rationality. However, some experimental researches showed that decision makers in reality often stopped searching earlier. In this paper, some assumptions of the standard secretary problem are weakened and a satisficing policy based on the hypothesis of bounded rationality is proposed to describe the choice behavior of a decision maker. Moreover, the possibility degree of the decision-maker to choose the satisfactory item is calculated.

The photocatalytic degradation process of waste water was usually influenced by many factors, such as different ions, addition reagent and pH value. In order to investigate the effect of ions strength in the photocatalytic process, the anions and cations were systematically investigated with P25 TiO2 photocatalyst with Rhodamine B (RB) as waste water in this work. The results showed that the cations of low valence showed minimum negative effect on degradation rate and the most anions showed enhance the degradation rate of RB. The ions strength showed random in the photocatalytic process.

The layout of rental station of bicycle and scaling prediction is the reason of hard to renting and returning the bicycle. Base on the experimental practice of public bicycle system planning, this paper presents the basic principles and thoughts about the planning of the system, and combining with the Dongcheng district discussed the models limitations in predicting the scaling. Finally, some recommendations are proposed to build an excellent system.

In order to study the dynamic response of transmission tower equipped with a pendulum damper induced by wind load, a simulation, considering wind load acting on pendulum, is implemented. Deducing the vibration equation of transmission tower-pendulum system induced by wind and utilizing harmony superposition method and Davenport power spectra to simulate fluctuating wind load, time history analysis based on Newmark β step-by-step integration method is conducted to study the influence on displacements of pendulum and tower tip in the two conditions of considering and unconsidering wind load acting on pendulum damper. It can be found that pendulum displacement would be underestimated, and tip displacement would be overestimated if we dont consider wind load acting on pendulum.

The Cup-type transmission tower-line system was a classic representative of high voltage electric power carrier, which was an important lifeline project. However, it frequently collapsed under different environmental loadings, especially strong wind. In this work, four tower five line finite element models simulated wind-induced progressive collapse process by birth-to-death element technique in ABAQUS/Explicit. The numerical simulation results demonstrated that this application could describe the structural collapse performance clearly and effectively and transmission tower-line system collapse path depended on the number, position and last deformation of damage elements.

Ion exchange method was used to remove the sodium ions from the mother liquor of sodium fluorosilicate in this study. Some experiments were done at different conditions of the amount of 732 resin, reaction temperature and time. At the same time, the regeneration method of 732 resins and the effect of removing sodium ions of the regenerative resins were investigated either. The optimum conditions were obtained. The result indicated that ion exchange method was feasible. And the resins could be regenerated and reused for many times. Ion exchange method was pollution-free and low cost in the treatment process of mother liquor of sodium fluorosilicate.

Aimed at the situations of the low accuracy of overhead line fault detection and the high cost of line fault information transmission with the aid of GSM correspondence network, this paper introduces overhead line fault detection and location system as the core of industrial computer. The combination of software and hardware, the methods of current rate of change and zero current detection are used, and so the accuracy of short circuit fault detection is improved. The features of ground phase voltage drop and the 5th harmonic current are integrated, and the accuracy of ground fault detection circuit is improved. Zigbee wireless communication technology is used to make into independent signal transmission system, which not only reduces the system's operating costs but also ensures the reliable transmission of signals. Taking Kingview 6.51 software as development platform, the monitoring program and display with many functions are designed. The system has been put into operation, running in good condition, and passed concluding and acceptance smoothly.