Search

Three-dimensional (3D) printing has been playing an important role in diverse areas in medicine. In order to promote the development of tissue engineering, this study attempts to fabricate tissue engineering scaffolds using the inkjet printing technology. Sodium alginate, exhibiting similar properties to the native human extracellular matrix (ECM), was used as bioink. The jetted fluid of sodium alginate would be gelatinized when printed into the calcium chloride solution. The characteristics of the 3D-printed sodium alginate scaffold were systematically measured and analyzed. The results show that, the pore size, porosity and degradation property of these scaffolds could be well controlled. This study indicates the capability of 3D bioprinting technology for preparing tissue engineering scaffolds.

The building sand is mainly composed of river sand at early stage. Recently, with the depletion of river sand, the new mined river sand cannot meet the demands for building sand. The sea sand is resourceful and can remedy the deficiency of sand for construction. However, the sea sand contains high content of chlorine salt, shell and lightweight matters. They are harmful for the strength and durability of concrete and will lead to premature corrosion of rebar. This will endanger the safety of construction. The studies demonstrate that high content of chlorine salt in sea sand is the main factor led to the deterioration of sea sand concrete. Therefore, in order to ensure the safety of construction, the threshold value of chloride content is specified in standards about concrete and aggregate. And methods testing the content of chloride ions are provided. However, the criterion in different standards differs from one another, which means their different viewpoints about the harm of chloride ions. In this work, the threshold value and test methods of chloride ion content for the building sand in the national standards and the international standards are summarized. The research has great significant for setting standards about sea sand, determining the rational threshold value of chloride ion content and improving the method testing the content of chloride ions.

The micro-fluidic inertial switch with liquid metal droplet moving under the action of acceleration has overcome the disadvantages of contact bounce, arcing and welding, as are found in the traditional inertial switch. Micro-fluidic inertial switches have no moving parts, a small contact resistance, a long service life and a large current capability. In this paper, we present a micro-fluidic inertial switch that is composed of two-stage micro-valves. This design facilitates tuning of the threshold by adjusting the mercury volume, and so provides better switching performance. Numerical simulation of an orthogonal experiment is used to identify the semi-analytical model of the switch threshold. Results show that the identified model is in accordance with simulation results. Switch prototypes are fabricated by micro-machining techniques including ICP dry etching, sputtering technology and anodic bonding. Centripetal test results show that the switch threshold can be tuned by the careful adjustment of mercury volume.

This paper introduce a new method for extracting internal wave parameters from SAR image. The surface current induced by the internal wave is simulated according to the KDV equation. Then the radar cross section induced by the internal wave can be calculated. The wind speed and pycnocline depth are modified using the dichotomy method step by step which causes the simulation radar cross sections close to those measured from the SAR image. Finally, both the wind speed and pycnocline depth can be obtained. This method is tested on the example of an SAR image. The simulated internal wave signal is consistent with the radar cross sections of SAR images. Their correlation coefficient is up to 90%, which indicates that this method is convergent and applicable.

Wavelet decomposition on acoustic spectrums is a novel method in the field of gas composition sensing. However, the existing method doesn’t explain the relationship between the characteristics of acoustic gas spectrums and the results of wavelet decomposition, and it has high computational complexity. In this paper, we firstly find it can basically keep the recognition rate if the detail coefficients from wavelet decomposition are used to construct samples instead of characteristic coefficients extracted from the detail ones. Nevertheless, the detail coefficients can represent the properties of acoustic gas spectrums, which can’t be represented by characteristic coefficients. Then, we find points of detail coefficients with relatively high recognition rate are mainly distributed in the first three layers. Therefore, it can reduce the computational complexity when three-level decomposition is directly utilized in the method of gas composition sensing.

Algicidal bacteria as part of the microbial populations in natural waters, is possible toinhibit the growth of algae or kill algae, dissolve algal cells in a direct or indirect way. In this study,four algicidal bacteria were isolated from cyanobacteria bloom water of Lake Dianchi, designated asDCJ-1, DCJ-2, DCJ-3, DCJ-4 respectively. The algicidal range and algicidal activity assay of the fouralgicidal bacteria showed that they have different algicidal range on the 10 tested algal species, whichstrain DCJ-2 has the best algicidal activity. The results indicated that bacterial strain DCJ-2 has highalgicidal activity against the Plectonema boryanum and exhibited algicidal activity through directattack. The lytic effect of strain DCJ-2 against Plectonema boryanum was time-dependent. It could be a potential bio-agent to control the blooms of cyanobacteria.

With the generation and development of low-carbon economy, as an implementation of low-carbon economy in tourism industry, low-carbon tourism has attracted great attention. The development of low-carbon tourism becomes a hot topic of the government, travel operators and tourists, which are the three elements to constitute the development pattern of low-carbon tourism. Based on the practical situation of Qinhuangdao city and started from the three aspects, this article discussed the development pattern of low-carbon tourism in Qinhuangdao.

Qinhuangdao is an important coastal tourism and port trade city in our country, and its environmental change and development trend of the offshore area will directly affect the future development of the city[1]. This paper analyzes the comprehensive renovation of Qinhuangdao offshore environment, and puts forward to build such five safeguard mechanisms as the organizational guarantee, support guarantee, capital support, technical support and public participation, aiming to improve the Qinhuangdao offshore water environmental conditions and promote the sustainable development of the coastal zone region.

This paper is mainly discussed in areas under a unified multi-domain framework, the unified constraint expression of optimization simulation model and critical theory in the process of solving. Establish the multi-domain optimization simulation model of complex product, study the complex coupling between multi-domain constraint models, analyze the parameters sensitivity of unified constraint expression model and reduce the restraint scale. Using the principle of global satisfaction as far as possible, to achieve coordination of multi-domain constraints based on the component level, solving the Large-scale multi-domain unified optimization simulation model with the homotopy iteration method.

This paper is mainly discussed the establishment of the unified constraint expression of simulation optimization model. Express all kinds of element constraints with unified physical mathematical mapping mechanism, uniform the model representation of product components in each domain and establish the unified expression model, in order to facilitate the follow-up simulation solution of multi-domain constraint system.

BBS's speech in the public opinion has great impact on students’ emotion. If we can regulate public opinion of university BBS of, and deal with the speech with cross impact on students' moral emotion timely, which can make the BBS having good cross and the interaction impact on students' ideological and moral emotion. In this paper we use the MyEclipse5.1 version to expand the public opinion module of the forum, and use with chasing method to calculate the value of object function in the network public opinion evaluation, and join the moral evaluation module in the network architecture. The main function of this module is to optimize the evaluation process of the forum, realize the real-time evaluation of network public opinion, and eliminate the negative cross influence of network evaluation on students' moral emotion.

In the Green Building assessment system, vertical planting technology and criterion problems are neglected. This paper compared with the existing standards, and summarized the key technology in the actual project, pointing out that projects should be classified, both in different structure conditions and the use of various materials. Maintenance management scores of vertical planting in Green Building evaluation should be strengthened. This method exceeds traditional standard, and focus more on technology and the management of vertical planting in Green Building.

Designs a scientific questionnaire surveys according to the particularity of persons evacuation in metro, and sends them to passengers at random in metro. After thorough analysis and careful statistic of the questionnaire surveys data, obtains several regulations, such as the passengers personal parameters, present situation of the passengers safety consciousness, present situation of the passengers safety knowledge and passengers first reaction to fire etc. These data not only enriched the evacuation database of psychological and behavioral responses, but also provided more accurate and more effective supports for fireproofing design. At the same time, these conclusions also are good for the fire prevention and environment protection.

Starting from the goal to overcome the limitation of the single type algorithm of iris recognition. In this paper, a two-step iris recognition algorithm is proposed based on feature extraction on corner and Gabor transform .First of all, it uses the corner feature of iris texture to recognize for achieving the purpose of removal of alien and confirm the vast majority of similar samples rapidly; if it unabes to determine the category in the first step, the result of the first step is used as the initial angle in normalized phase, and then it carries out iris feature extraction and recognition based on Gabor transform. The experimental results show that this results the speed and performance in the recognition improved significantly than the traditional algorithm of single feature recognition.

The adoption of Information and Communication Technologies (ICTs) in critical infrastructures, e.g. smart grids and power plants, facilitates the interoperation between components but introduces new security issues as well. Based on the survey of typical Industrial Control Systems (ICSs) in the power grid corporation, a three-layer abstract model of electric ICS is built in this paper. A corresponding security test and evaluation model is then proposed and detailed steps, components and methods involved are described. The proposed model can be considered to be the guide to carry out security test and evaluation activities so as to enforce the security protection of ICS in electric industry.

MESIS, a new generation system, based on advanced information technologies, such as geographic information, database, visualizing, workflow, multimedia and web, work for real-time analysis and mass-industrialization of metrology service products. The system has been installed and localized in Chongqing and the three class data is collected and got. The individualization maps are made with meteorology stations, rivers and administrative area and the models of meteorological service products are made. The meteorological service products can be produced automatically with MSPGS and the meteorological service products for a certain range can be got.

In consideration of the current situation that college buildings are still heated as normal without occupancy,causing energy waste,the on-duty heating will be adopted in college buildings without occupancy under the premise to ensure the indoor comfort requirements.In the case of one college, the energy saving rate and cost saving rate were evaluated for college buildings that used zone and time control heating systems for buildings of different functions.The results show that the annual heating energy saving rate is 34.5%,and the annual heating cost saving rate is 51.5%. In similar collage buildings, 5.48kg of standard coal and 14.43Yuan per square meter of structure area can be saved per year if using zone and time control heating.

A bio-robot treats the living animal itself as the robot-moving carrier, which possesses good mobility and adaptability even in complicated non-structured environments. As one of the flyable bio-robots, pigeon-robots have been studied for several years. However, how to arrange the equipments on board effectively to minimize the impact to pigeons natural flight has not been considered. In this study, we estimated the bearing capacity of a pigeon during takeoff by increasing the weight gradually. Different loading modes have also been compared to find a rational way to reduce the influence of the loading to flyability. These results are expected to be helpful to the design of pigeon-robots.

One of the most effective means to treat electromagnetic pollution is to develop electromagnetic interference shielding materials. Such as Foam nickel, a new lightweight porous material with large surface area, good conductivity and permeability, has drawn much expectation by virtue of its excellent electromagnetic interference shielding(EMI) performance. Recently, with the development of nanometer materials, Tremendous researches also showed that it is an efficient way to combine Foam Ni with nanometer materials for enhanced EMI performance. Herein, in this work, porous nickl/carbon nanotubes(CNT) composites were successfully prepared by a facile electrophoretic deposition method. scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and EMI tests were adopted to carefully characterize its morphology, compositions and EMI performance, respectively. The results indicated that CNT were homogeneously and tightly deposited on the surface of foam Ni by electric field force during the electrophoresis process. With the addition of CNT, the shielding behavior of the 90 PPI and 1.5 mm thick composite could be as high as 31dB in average, which is 14 dB increased compared with the pure foam Ni under same conditions around 8~12GHz frequencies. The synergistic effects of both foam Ni and CNT resulted in superior EMI performance and broad application prospects.

Removed at authors request

The study of vestibule neurons specific firing mode of Gekko gecko under stimulus of different angles and rotating speeds has an important theoretical significance to reveal the control mechanism of Gekko geckos vestibular position as well as to the development of gecko-robots. A vari-angle rotating equipment was made to give different stimulus in study of Gekko geckos vestibular electrophysiology. The equipment mainly consisted of four parts as follows: fastening panel for stereotaxic instrument, shaft locking device, counterweight, driving system. The shaft locking device and counterweight realized tight fixation and torque equilibrium at different angles respectively. Fastening panel matched the general stereotaxic instrument. A stepper motor driver controlled the velocity and acceleration of rotation. Initial experiment verified that the equipment had superiority of easy operation, reliable positioning and accurate control of angle and speed, which indicated that it could meet the demand of the Gekko geckos vestibule research.

Wet digestion method had been used in river deposit of BZ profile. At the same time, Mn, Cu, Ba, Ni, Pb, Zn, Rb, V, Sr and Zr in river deposit were determined by ICP-OES. The results show that the relative standard deviations are all below 0.39%, while the recovery of standard addition is 94.3%~117.1%. The method is proved to have good precision and accuracy, and to be simple and rapid. And the measured data provide basis for paleoflood study in this area.

Adsorption removal of arsenic from contaminated drinking water was carried out by using Mn-Fe binary oxide adsorbent. Main phase of adsorbents was influenced by pH value of solution, and pH of 10 is the suitable synthesis condition to achieve the Mn-Fe binary oxide suspension adsorbents. Adsorbents with Mn/Fe mole ratio from 6/4 to 2/8 exhibits higher arsenite removal larger than 99.6%.

Infrared images have the high dynamic range characteristic, generally digitized to 14 bit. While most display devices can only show 8 bit images, so high bit-wide infrared image signal should be compressed to low bit-wide display data without losing the important detail information. A new high-dynamic-range compression and detail enhancement algorithm for infrared images is presented in this paper. In the proposed algorithm, the original infrared image is separated into the low-frequency base component and the high-frequency detail component. Then the base component is compressed with the simple gray level linear mapping, and the detail component is enhanced with the S-curve transformation. Finally, the two components are combined to get the 8 bit enhanced image. The experimental results show that the proposed algorithm can achieve the dynamic range compression while effectively preserve and enhance the local detail information.

A β-(1,3)-D-glucan (curdlan) synthase gene for a low molecular weight curdlan biosynthesis, crdSAg, from Agrobacterium sp. M503 was cloned and its encoding protein was characterized by several online protein analysis softwares. The crdSAg consists of 1965-base-pairs Open Reading Frame (ORF) encoding a protein with molecular weight approximate 73.5 kDa, which contains the conserved domain of CESA-CelA_like belonging to glycosyltransferase family 2 (GT2). Moreover, CrdSAg was a membrane protein with seven hydrophobic transmembrance domains. The second structure analysis indicated it was composed of 43.12% α-helix, 17.89% β-sheet, and 38.99% random coil structure. These data will lay a foundation to clarify the biosynthesis mechanism of the low molecular weight curdlan.

Aiming at the lower automation, accuracy and efficiency of the domestic band sawing machine, this paper studies the real-time detection technology based on the sawing load, develops the digital control system of the constant power sawing with the micro-feed performance to improve the load imbalance of the band saw blades in the sawing process. The real-time detection technology based on the micro-deviation of the band saws trajectory is studied. The digitized deviation-correction control system of the band saws trajectory is developed with the fine-tuning performance of the saw stiffness to correct automatically the band saws trajectory. The weight-detection technology based on the scan reconstruction of the surface profile size is researched. The digital control system of the fixed weight sawing is developed to meet that the weight error of the sawed workpiece is fewer than 3%. That can improve the accuracy and efficiency of the band sawing machine and provide the foundation for the realization of the digital control of the band sawing machine.

The paper use the observational data of Chongqing from 1981to 2010, to analyze the spatial and the temporal distribution characters. The results are the follows: (1) Chongqing has two Foggy areas, one is the north by central region with Changshou, Fuling as the center, the other is the northwest region with Hechuan, Beibei as the center. (2) The fog mainly occurs in winter, and especially often occurs in December. (3)The number of the fog days are reduces in most Chongqing areas from 1990s to 2000s. Based on the NCEP reanalysis data, the paper analyze a fog weather, the results indicate that the wind by north at 500 hpa, the anticyclonic circulation at 700 hpa, the precipitation a few days ago, the high humidity at the lower layers and low humidity at higher layers cause the fog in November 7, 2006.

It is important for human-computer interaction smoothly with viewpoint controlling in complex virtual space based on VRML. Analyses the application characters of viewpoint during the realization of 3D models with VRML, and researches the methods of viewpoint control from the point of the viewpoint interactive technology of 3D models, focuses on approach of viewpoint control using Viewpoint node and NavigationInfo node, and provides the demos of the relevant VRML programs.

Unlike the solid-solid contact of traditional micro acceleration switch, liquid metal can be utilized to solve the disadvantage of solid-solid contact, such as contact wear and signal bounce. Liquid-metal micro switches have demonstrated no contact bounce, low switch-on time, low contact resistance, long life, and the capability to handle large currents. So the liquid-metal micro acceleration switches have attracted researcher’s attentions increasingly. To investigate the flow characteristics of mercury droplet in micro acceleration switch, this paper establishes numerical models of micro acceleration switch by using FLUENT. The effect of contact angle, droplet volume and temperature are discussed in this paper. Based on the VOF-CSF model of FLUENT, a serial of simulations were performed. The simulation results show that the influence of contact angle and droplet volume on flow characteristics is serious, and the influence of temperature is small. As compared with theoretical analysis, simulations are in good agreement with theoretical analysis.

Discussed the key effects and basic principles of data fusion of remote sensing for realizing plants virtual reality simulation. Focused on researching and presenting the general methods of data fusion of remote sensing, application interfaces, and 3D visual display of virtual plants. Through the research, the visual display of visual plants will be realized with full remote sensing interfaces of real-time transferring and intervening.

Aiming at the low automation level and the non-completeness of the fault diagnosis technology for the band sawing products in China and in our province, this paper studied the digital control system based on extracting the flutter amplitude characteristics of the band saw blades in real time, developed the adjustable device which clears the sticky chips between the saw teeth based on the brush friction change according to the inclination angle Φ between the brush disk and the saw blade, and designed the state recognition system for the hydraulic oil circuits of the sawing machine based on detecting real-timely the oil temperature, pressure, flow rate and hydraulic cylinders displacement and transmitting wirelessly. So it can improve the grade, efficiency, reliability and service life for the band sawing machine.

The two-cylinder drive is one of many commonly used mechanical drive forms. Its synchronous control accuracy determines the movement accuracy of the working machinery. The paper established the mathematical model for the two-cylinder electro-hydraulic servo synchronous drive system, and revealed that the two-cylinder horizontal electro-hydraulic synchronous drive system has the cascade form of the linear system with the nonlinear system. Taking the band sawing machine and the broaching machine as the application object, the paper analyzed their compositions and synchronization CNC systems. Aiming at the dual-cylinder drive form for the broaching machine, the IPSO-PID synchronous controller of the two-cylinder system was designed. Through the digital simulation and actual testing, the results show that the IPSO-PID synchronous controller is faster in the tracking response speed and better in the synchronization performance than the conventional PID synchronization controller.

Aiming at the lack of the mature process parameters optimization design and the dedicated digital control system for the band saw equipment at home, the dynamic model of the sawing process is established. The correlativity of the cutting quality with the cutting process parameters is analyzed. The optimization design of the cutting process parameters and the dedicated digital control strategy for the appropriate band saw equipment are studied to form the independent intellectual property rights on the parameters optimization technology for the sawing equipment process and the numerical control system based on the technology. That provides the technical support for improving the processing accuracy, efficiency, and reliability of the band saw equipment.

For the general broaching machines problems of structure bulkiness, poor cylinder synchronization, lack of optimization design, low-grade control system, low efficiency and operational reliability, the paper studied the structural optimization technology of the large-scale high-performance CNC vertical broaching machine, designed the new 360-degree high-load lateral rotary table, the axial-rotary multi-pass joint of the anti-leakage and the elastic-contact, and the modular slider rails, so as to improve the mechanical performance, the working stability and reliability. The remote network intelligent monitoring system and the multi-function data acquisition processor for the developed CNC broaching machine, realize the enterprise management information, the enterprise resource optimization, and the automation and intelligence of the manufacturing process.

This paper takes the CNC broaching machine as the research object. The dynamic models for the various components of the broaching machine are established. The theories of the modal analysis and the dynamic performance are studied respectively. According to the analysis results, the improvement schemes on the partial structures or geometries are put forward. At the same time, the paper also studied preliminarily the dynamic characteristics of the CNC broaching machine. During the analysis process, the models of the parts and the whole model are established using the finite element method to optimize the structures of the parts and the whole. That has undoubtedly a very important significance for improving the dynamic performance of the new machines structure, improving the processing accuracy, shortening the development cycle and reducing the development costs.

This paper takes the large band sawing machine GB42500H as the research object, and establishes the dynamics models of its various parts. Respectively, the relative research is done from the theoretical modal analysis and the dynamic performance testing. According to the analysis results, the structure or geometry improvement scheme of the parts is proposed. The paper also studies preliminarily the dynamic characteristics of the large band sawing machine GB42500H. During the analysis, the models of the parts and the whole are established using the finite element method to optimize the structures of the parts and the whole. That has undoubtedly a very important significance for improving the dynamic performance for the new machine tools structure, increasing the processing accuracy, and shortening the development cycle and costs.

Aiming at the cutting for various kinds of material, in order to solve the problems that the present large band saw equipment at home is poor in the synchronization of the sawing feed and is lack of the dedicated NC system, the paper introduces the electro-hydraulic servo drive and digital control technologies, researches the synchronous servo drive and cutting force feedback control technologies, and develops the sawing machine’s control system based on the above technologies. The NC system has been applied in the CNC band saw equipment of the large Portal style. The saw frame uses the structure driven synchronously by the dual hydraulic cylinders in order to guarantee the accuracy of the feed motion. The control system driven by the electro-hydraulic servo synchronization detects the implementation of a two cylinders and does the displacement feedback to achieve the movement synchronization on both ends of the portal frame using the synchronous control strategy. That ensures the movement accuracy for the CNC band saw equipment of the large Portal style and improves the cutting accuracy and efficiency of the equipment.

The detection and fault identification of the partial discharge is the important aspect for the monitoring of the power equipment. For the lacks of the traditional detection methods, this paper analyzed the UHF signal characteristic parameters of the power equipment’s partial discharge, and developed the UHF detection system of the partial discharge. The A/D technology of the gain equalization and quantization in the different bands is studied, and the fault diagnosis strategy of the partial discharge based on the UHF and AE is proposed. On the premise to ensure the integrity of the partial discharge signals, the acquisition, amplification, analysis and storage of the partial discharge signal is realized. The case-based reasoning technology determines the fault type and fault degree of the partial discharge to make the accurate judgment for the operational state of the equipment and improve the intelligence level and the operational reliability for the state diagnosis of the power equipment.

NiO nanoarrays with different hierarchical porous structures were synthesized by using hard-template SBA-15. The analytic results showed that the mesoporous structure parameters of the as-prepared NiO nanoarrays increased obviously with the increase of the addition of SBA-15 to a certain extent. The results may be helpful for the utilization of NiO as supercapacitors.

Aiming at the characteristics of the all-electric logistics machines, the paper established the multi-disciplinary mathematical models of the electric power steering system (EPS) and set up a semi-physical simulation platform based on dSPACE for the multi-domain system of EPS. The robust control method was applied to improve the EPS system for the stable actual output of the EPS multi-domain system in the uncertainty. By the real-time semi-physical simulation, the control features of the improved EPS multi-domain system were analyzed so as to increase the robustness and adaptability of the EPS system.

In the molding process of the tri-component composite spinning, the flow control of each component plays a significant impact on extrusion swell. This paper simulates the extrusion swell of the tri-component fiber in different flow ratio of different components based on Polyflow fluid dynamics simulation software, and measures the extrusion swell ratio of the tri-component fiber in different flow ratio of different components through the experiment. Simulation and experimental results show that by adjusting the melt flow ratio of the various components, we can obtain the desired extrusion swell ratio, which can improve the performance of the tri-component fiber.

The load changes of working machinery in the running process will certainly result in poor matches in the characteristics of the transmission system. For the issue, this paper studies the adaptive power control model and algorithm. The adaptive power control system is developed using the adaptive power control technology based on the load identification, and is applied in the full AC electric forklift and the CNC band sawing machine. The variable frequency system and intelligent control method based on the integration of the load characteristic recognition and control proposed in this paper, adaptively adjust the parameters of the PID controller according to the load characteristic parameters identified real-timely for the transmission system of the working machinery, so as to achieve the best performance matches, the highest effectiveness and lowest energy consumption of the entire transmission system.

On the basis of studying the transformer condition assessment, the paper put forward the monitoring framework of the transformer cooler based on the intelligent electrical grid, and developed the intelligent monitoring system of the transformer cooler based on the DCS and dual PLC. The system used the DCS and dual PLC redundancy, the intelligent controller of the motor, the system’s platform for the centralized monitoring, the environmental control system and the other advanced technology, and implemented the monitoring, remote control and status monitoring of the transformer cooling system to improve the reliability and adaptability of the transformer cooler system. The system can be applied for the intelligent electrical grid. The above technologies are innovative in the high-performance distributed bus, the integrated design of three-phase solid state relay and magnetic latching relay and the cooling technology of the semiconductor in the PLC module, and lie in the leading domestic level.

Partial discharge causes mainly the insulation deterioration. It is the significant symptom and manifestation, and is an important factor of the insulation failure for the electrical power equipment. On the basis of analyzing the physical model of partial discharge, this paper used the online monitoring technology of partial discharge that combines the ultra high frequency (UHF) method and the acoustic emission (AE) method, studied the fault pattern recognition method of partial discharge based on the case-based reasoning algorithm, and established the intelligent fault identification system of partial discharge based on the case-based reasoning. The system can accurately and reliably identify the fault mode type, the specific fault location and severity of partial discharge for the electrical power equipment to make the health evaluation and improve the reliability. Through the application of the new materials and new technology, the load loss of the transformer can drop by 15%, the no-load loss can decline by 50% and the fee of electricity loss can down by 32.5%.

The logistics and loading machinery is the typical hydromechatronics integrated system. How to solve the reasonable power match in the driving and lifting process of the logistics and loading machinery, we need to establish the mathematical model of the driving and lifting system, and analyze their control characteristics. Aiming at the load requirements for different operating conditions, this paper studies respectively the dynamic characteristics of the driving and lifting system. Through simulation and computation, the control methods and strategies based on the best performance are proposed. That lays the foundation for the optimization design of the logistics and loading machinery.

Logistics Machinery is the important equipment for carrying material. The all-electric logistics machinery is a development trend in the international logistics industry today. This paper studies the intelligent control model and algorithm for the driver control system of the full AC electric stacking forklift, proposes the composite models of the fuzzy neural network’s identification NNM and the Self-tuning PID NNC, and designs the variable frequency module of the speed sensorless vector control. Through the organic integration of the variable frequency module, the speed reducer and the AC motor, we develop the integrated machine used for the driver control system of the full AC electric stacking forklift. The paper put forward the intelligent control method of the variable frequency which combines the load’s characteristic recognition with the control to achieve the best matching, the highest efficacy and the lowest energy consumption of the entire transmission system.

The paper gives an introduction of the structure and working principles of the new gap-type electro-hydraulic servo valve and advances the performance law of throttle by a comparative analysis of the performance of gap-type electro-hydraulic servo valve and the traditional rectangular orifice. In the meanwhile, combined with the introduction of the coordinate of working state, this paper aims to solve such complex problems as the design parameters of hydraulic components and provide a basis for the visual design of the performance of hydraulic components and cavity control parameters of servo valve and the main valve.

This paper presents a micro-fluidic inertial switch with varying rectangular cross section, which employs the moving mercury droplet in the micro-channel to close a switch. Combining the Young-Laplace formula with the structure, the formula of the threshold g-value is derived. The influence of design parameters of microchannel on the threshold g-value is analyzed. Based on the VOF approach containing contact angle effects, the dynamic behavior of mercury droplet in the microchannel is simulated using Fluent. The response time is predicted through simulation with the contact angles ranging from 130° to 170°. In addition, the dynamic process of inertial switch is simulated, and the result indicates that the selected design parameters can achieve reliable switching under given threshold g-value.

According to the requirement of collaborative product development, a networked collaborative design and manufacturing system is put forward. A neuter digital assembly model which is independent from all kinds of the commercial CAD software is set up. The quick planning of the assembly sequences and the automatic search of the assembly dimension chain can be realized by the simulation.

In response to the increasingly stringent diesel emission regulations, the paper analyzes the relationship of the low-speed marine diesel engine's emission with the combustion process, the fuel injection law, the exhaust recirculation and the SCR. Then the scheme of the fuel injection system with the high-pressure common rail for the low-speed diesel engine is proposed, and the test system for the diesel engine's emission performance is established. Through the experimental research, the optimization and matching technology for the diesel combustion process based on the emission control is analyzed, and the best injection law of the diesel engine is revealed under the different conditions. That will provide the technical support for the design and operating management of the diesel engine.