Search

For many centuries, paper is the main material for recording cultural achievements all over the world. Infrared (IR) spectroscopy is an essential analytical tool for the structural analysis of paper and pulp chemistry. This review article introduced recent technical and scientific reports in terms of IR spectroscopy in the paper science and application, where interest had increased during the last couple decades (2000–2022). Five parts were described according to the application of IR spectroscopy: the analysis of cellulose and its derivatives, estimation the date of documents, identification the origins of fiber or paper, specification the chemical and physical properties of paper, and characterization the new materials of paper. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Cellulose was isolated from recycled pulp and paper sludge and used to synthesize cellulose nanocrystals. Response surface methodology and Box-Behnken design model were used to predict, improve, and optimize the cellulose isolation process. The optimal conditions were a reaction temperature of 87.5 °C, 180 min with 4% sodium hydroxide. SEM and TEM results revealed that the isolated cellulose had long rod-like structures of different dimensions than CNCs with short rod-like structures. The crystallinity index from XRD significantly increased from 41.33%, 63.7%, and 75.6% for Kimberly mill pulp sludge (KMRPPS), chemically purified cellulose and cellulose nanocrystals, respectively. The TGA/DTG analysis showed that the isolated cellulosic materials possessed higher thermal stability. FTIR analysis suggested that the chemical structures of cellulose and CNCs were modified by chemical treatment. The cellulose surface was highly hydrophilic compared to the CNCs based on the high water holding capacity of 65.31 ± 0.98% and 83.14 ± 1.22%, respectively. The synthesized cellulosic materials portrayed excellent properties for high-end industrial applications like biomedical engineering, advanced materials, nanotechnology, sustainable packaging, personal care products, environmental remediation, additive manufacturing, etc. [ABSTRACT FROM AUTHOR]

During the early Cold War, it was difficult for American intelligence to penetrate the Iron Curtain but a potential solution soon arose: émigré intelligence groups such as the Magyar Harcosok Bajtársi Közössége (MHBK) or 'Association of Hungarian Veterans'. This group, however, turned out to be an intelligence 'paper mill'. Attempts at trans-Atlantic cooperation with the MHBK and similar groups failed as they lost most of their good sources and were penetrated by communist security services. By the mid-1950s, US intelligence cut these groups off, took over their good sources, and established a source registry to prevent recurrence of the problem. [ABSTRACT FROM AUTHOR]

Xuan paper is one of the most famous handmade papers in China and is an important paper for conservation. However, the evenness of Xuan paper has not yet received much attention. In this study, the distribution of the in-plane grammage and mechanical properties of Xuan paper are measured. It is found that the distribution of the in-plane grammage and mechanical properties of Xuan paper is uneven. In the handmade direction, the grammage and mechanical properties of Xuan paper are overall largest in the lower area, followed by the upper and middle areas. The sheet forming process of Xuan paper has an important effect on the distribution of in-plane grammage, mechanical properties, and fiber orientation of Xuan paper. The folded state has a negative effect on the mechanical properties of the folded area of Xuan paper. This study will help raise awareness of the unevenness in physical properties of Xuan paper, which is important in both conservation and research applications. [ABSTRACT FROM AUTHOR]

The pulp and paper industry stands out as an example of a technology based on a renewable resource, cellulose. The sludge, however, poses major environmental and public health problems. To effectively manage the sludge wastes, it is critical to fully evaluate its composition, possible environmental impacts, and the total amount of exploitable renewable resources. The study established the pH of the sludge to be 7.32 ± 0.98, an electrical conductivity (1.84 mS/cm), nitrogen concentration (2.65 ± 0.21%), and total organic matter (41.23 ± 3.11%). The cellulosic content was established to be 74.07 ± 2.71% which contributes to 53.07 ± 1.23% water holding capacity (WHC). The most abundant elements were C and O, followed by Cl, Si, Al, and Mg, with lower concentrations of S, Si, K, and iron. The polycyclic aromatic compounds (PAHs) levels ranged from 0.29 to 322.56 ng.g-1 with 1-methyl pyrene posting the highest concentration (322.56 ng.g-1. XRD peaks at 17.10°, 23.86°, 30.14°, and 36.57°, which imply the existence of CaCO3. SEM indicated that the sludge was majorly comprised of fibers materials with average particle sizes of 280 micrometers. TGA/DTG analysis showed that the sludge had the greatest cellulose and hemicellulose (64.7 wt. %). [ABSTRACT FROM AUTHOR]

The pulp and paper industry has significant sustainability implications and necessarily requires a careful consideration of direct and lower-tier suppliers for effective sustainable supply chain management. This paper utilized an extensive literature review and semi-structured interviews of experts in the Chinese pulp and paper industry to unearth the factors that highly influence multi-tier supply chain sustainability. A Technological-Organizational-Environmental (TOE) and Human-Organizational-Technological (HOT-fit) based theoretical framework was employed to classify the identified factors. Then, an Analytical Hierarchy Process (AHP) based methodology was applied to determine the relative importance of the factors. A comparison analysis of the relative importance of the factors as determined by the experts in the focal companies, Tier-1 suppliers and Tier-2 suppliers of the Chinese pulp and paper industry is presented. The results show that institutional and technological factors are most critical to actualizing multi-tier supply chain sustainability. Thus, the study outcomes present relevant theoretical and practical implications for the managers and practitioners in the pulp and paper industry on how to facilitate multi-tier supply chain sustainability for increased competitiveness. Furthermore, this study provides guidelines for other industries as well and sets the stage for subsequent theorization and exploration of multi-tier supply chain sustainability for expected performance gains. [ABSTRACT FROM AUTHOR]

Thiophene sulfide is difficult to be removed by hydrodesulfurization. In this study, ZnCl2-waste paper fiber activated carbon was used as adsorbent to remove thiophene sulfide from simulated oil by hydrothermal modification. Under the optimum condition of ammonia modification, the adsorption capacity of modified adsorbent to BT is 14.8 mg S/g, 2.98 times that of unmodified. BET, FTIR and Boehm analysis showed that the mesopore volume of ammonia modified adsorbent increased by 96.62% and the mesopore ratio increased from 12.58% to 43.40%, which was conducive to improving the adsorption rate. After modification, the basic groups on the surface of the adsorbent increased by 44.3 times, and –NH3+, –OH and –NH2 enhanced the electron attraction and hydrogen bonding force between the adsorbent and BT molecule. Adsorption isotherms, adsorption kinetics and adsorption thermodynamics show that the adsorption process is spontaneous, entropic and exothermic. The pseudo-second-order kinetic rate constant increases with the increase of adsorption temperature, indicating that the increase of temperature is beneficial to accelerate the adsorption rate. The adsorption desulfurization process follows the mechanism of single and multilayer adsorption mixing. The results of this study can help to reveal more clearly that biobased activated carbon can be modified to adsorb thiophene sulfide. Ammonia modified adsorbents enhance the adsorption capacity for benzothiophene [ABSTRACT FROM AUTHOR]

In the current strategy, a highly sensitive and fast one-step colorimetric assay for trace determination of Cu2+ in water is presented. The planned assay was based upon the use of varnish polish-modified filter paper printed with 2-[5-(2-hydroxy-5-sulfophenyl)-3-phenyl-1-formazyl] benzoic acid monosodium salt, commercially named zincon. Under optimal conditions, the designed assay readily recognised the formation of blue–purple-coloured Cu–ZI chelate in less than 10 min. The proposed probe was able to detect Cu2+ in the concentration range from 0.04 to 10 μg/mL (6.34 × 10−1 to 1.59 × 103µM), with low limit of detection (LOD) of 0.01 μg/mL (1.59 × 10−1 µM). The LOD was 10-fold lower than the allowable level for Cu2+ in drinking water set by WHO legislation. The assay was applied for Cu2+determination in water with acceptable recoveries (89.6–102.1%) and precision (<3%). Therefore, the proposed sensing assay might be considered as a potential rapid and low-cost candidate for total determination and speciation of Cu2+in water samples. [ABSTRACT FROM AUTHOR]

The book "ChatGPT and healthcare: Unlocking the potential of patient empowerment" by Harvey Castro MD, MBA explores the application of ChatGPT, an AI language model developed by OpenAI, in the healthcare industry. The book discusses the benefits of ChatGPT for patients, such as generating concise summaries of medical histories and providing professional abstracts of research papers. It also highlights the importance of cautious utilization of ChatGPT due to potential risks and limitations, including non-intuitive responses and sensitivity to data alterations. The author emphasizes the need for enhanced medical and healthcare literacy to maximize the utility of ChatGPT. The book also addresses legal and ethical issues surrounding ChatGPT usage in healthcare, including privacy concerns and the need for clinical validation. Overall, the book presents ChatGPT as a tool that has the potential to transform healthcare services and improve patient experiences, but also acknowledges the challenges and limitations associated with its use. [Extracted from the article]

La transición hacia el uso del papel para la enseñanza de la escritura en las escuelas elementales públicas en México no fue sencilla. Al finalizar el siglo XIX, se había cuestionado el uso de las pizarras por el riesgo que representaban para la salud, pues muchas veces los estudiantes borraban sus escritos con saliva y el material con el que estaban fabricadas no siempre guardaba las especificaciones necesarias, además el ruido al escribir era insoportable. En cambio, el papel, desde el punto de vista higiénico, pedagógico y estético, fue considerado un material superior frente a la dureza de la pizarra, el brillo de la superficie y la poca precisión que se obtenía en el trazo de las letras. Derivado de este planteamiento, se vislumbró seriamente la posibilidad de la adopción de papel en las escuelas oficiales. Sin embargo, este material era escaso y muy caro. Hacia el cambio de siglo, sólo dos fábricas de papel podían surtir a las escuelas y era necesario que abarataran el precio, que el sistema de distribución garantizara el abastecimiento y que el suministro fuera continuo. Este artículo analiza el inicio del proceso de reconversión de una tecnología para la enseñanza como era la pizarra por el papel. Analizo el gasto que significó y cómo esta modificación fue resultado de una multiplicidad de relaciones sociales, culturales, económicas y políticas que se entrecruzaron para dar una nueva configuración del tiempo, el ruido y los valores establecidos en el salón de clases. The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom. [ABSTRACT FROM AUTHOR]

Production planning and scheduling in the pulp and paper industry can be very challenging. In most cases, practitioners address the production planning process manually, which is time-consuming and sub-optimal. This study deals with production planning encountered in a pulp mill company involving different wood species, parallel heterogeneous lines, inventory limits, sequence-independent setup times and preventive maintenance. To tackle the problem, an efficient mixed-integer formulation is proposed that optimizes when, where and how much to produce of different wood species and schedules preventive maintenance to minimize the total setup times. Several computational experiments are conducted to solve a case study in a pulp mill company in Chile. The results show the capability of the model to support the decision-making process in the pulp and paper industry, providing an efficient tool for practitioners to solve the problem in a reasonable amount of time. [ABSTRACT FROM AUTHOR]

Nano-ZnO has the characteristics of photocatalytic performance and excellent transparency and conductivity. Because of its many excellent properties, it also occupies a very important position in the types of semiconductor materials. Nano-ZnO film preparation technology has been researched and developed and applied in many fields, but there are few applied researches on the protection of paper artworks. The main content of this article is the study of the application and enhancement effect of nano-ZnO film preparation technology on the protection of paper cultural relics. In this paper, the sol-gel process is selected in the common film preparation process, and the configured sol is dipped and lifted. By comparing the paper covered with nano ZnO film and the paper not covered with nano ZnO film in the anti-aging performance test, anti-ultraviolet aging performance test, aging appearance change and the experimental results of the mechanical performance test of the application effect of different papers, the results are investigated. The application and enhancement effect of nano-ZnO film preparation technology in the protection of paper art works. Experimental studies have shown that under the same aging time, the mechanical properties of rice paper covered with nano-Zno film are higher than those of blank rice paper without nano-Zno film. The transverse tensile strength of the paper is increased by 5.88 m/N, an increase of 98%. The vertical tensile strength increased by 3.93 m/N, an increase of about 87%, the vertical folding resistance increased by 16 times, the horizontal folding resistance increased by 15 times, and the vertical tearing strength increased by 4.15 m/N, an increase of about 125%, and the transverse tearing degree is enhanced by 2.21 m/N, which is about 64%. The two kinds of rice paper were subjected to warm-heat aging, and the final results showed that the mechanical properties of the two kinds of rice papers showed a decreasing trend, but the mechanical properties of the rice paper covered by the nano-Zno film decreased at a slower rate, and the final mechanical properties were also lower than that of untreated rice paper. Blank rice paper covered with film is better. The experimental results of ultraviolet light on paper aging show that the nano-Zno film covering the paper will delay the paper aging, and the appearance of the nano-Zno film after ultraviolet light does not change significantly. Under the mechanical performance test of nano Zno film on different types of paper application, the tensile strength, folding resistance and tearing degree of the three papers participating in the experiment have been improved, which shows that the nano Zno film has the advantage of strengthening paper. [ABSTRACT FROM AUTHOR]

This article introduces a flexible and easy-to-implement open-ended scientific inquiry activity called the Paper Towels Challenge. After experimentally determining which of three unbranded paper towels is the most absorbent, students discuss their results and methods. The teacher facilitates the discussion of epistemological issues. This activity can be used regardless of the participants' age or country to promote science understanding, NGSS science and engineering practices, and twenty-first century skills, such as critical thinking and communication. The many uses, benefits, and possible adaptations of the activity are discussed. [ABSTRACT FROM AUTHOR]

Washi is paper made by hand from the bark of native Japanese shrubs. Washi is a common medium used for printmaking and paper crafts. Artists who have studied nagashi-zuki, a sheet-forming method unique to washi, often import Japanese fibers because alternatives with similar properties have not been identified. We propose Dirca L. (leatherwood), a shrub endemic to North America, as a source of fibers with properties similar to those plants traditionally used to make washi. The thinness and strength of the leatherwood paper allows it to withstand repeated bending, folding and creasing better than paper made from species of Wikstroemia (Japanese fiber), suggesting an alternative for use with various printmaking techniques and paper arts and crafts that involve folding, such as origami. We engaged printmakers and origami artists in creating original pieces using our leatherwood paper and evaluated how the paper responds to various printmaking techniques and complex folding. We identified Dirca mexicana as a source of fibers with similar properties to species of Wikstroemia used to make gampi washi. Handmade D. mexicana bark paper was successfully used as a paper medium for intaglio, lithography, relief, digital, and screenprinting printmaking techniques, as well as, complex folding origami sculptures. [ABSTRACT FROM AUTHOR]

Iron-impregnated filter paper (Fe-Pi) was evaluated as phosphorus (P) extractant in four soils of Ogun state, southwest Nigeria in a screenhouse experiment. The experiments lasted for 8 weeks. Soil P contents were extracted at 0, 4, and 8 weeks after the incorporation of amendments (cattle manure, poultry manure, and wood ash) using Fe-Pi, Bray-1, Bray-2, Mehlich-1, Hunter, and Olsen extractant. Agronomic variables were taken fortnightly from grown maize plants and later harvested at 8 weeks, residual effects of the treatments were also evaluated. Maize dry matter weight (DMW) and P uptake were also measured. Results indicated that a linear relationship existed among the extractants with significant coefficient at p ≤.001. Fe-Pi established a strong relationship with the conventional extractants in the following order: Bray-1 (R2 = 0.99) > Bray-2 (R2 = 0.98) > Hunter (R2 = 0.96) > Mehlich-1 (R2 = 0.86) > Olsen (R2 = 0.82). Fe-Pi had a significant relationship with P uptake and DMW. Phosphorus uptakes under the animal manure amendments were statistically higher than uptake in control and woodash amended soils. Therefore, the study concluded that Fe-Pi was a good predictor of plant available P and had significant relationship with Bray-1, thus it could be considered for the estimation of soil available P in soils of southwest Nigeria. [ABSTRACT FROM AUTHOR]

Lead pollution may cause serious damage to environment safety and human health, especially to children's growth. In this work, by using double stranded DNA (dsDNA) as the recognition element, a simple and effective electrochemical DNA sensor has been developed on a full carbon-based substrate, reduced graphene oxide/carbon paper (rGO/CP), to accomplish the rapid, sensitive and selective determination of Pb2+. Carbon paper (CP) provides a suitable substrate for the sensor with high portability and low cost, while rGO is easily electrodeposited onto CP and serves as both the signal amplification element and the molecular bridge between DNA and CP. Because of its high specific surface area and unique conjugated giant π structure, rGO tightly binds with DNA through π-π stacking and hydrophobic interactions, thereby providing loading of high quantities of DNA. The specific coordination between DNA and Pb2+ further improves the sensitivity of the sensor. The results demonstrate that rapid electrochemical enrichment of Pb2+ is achieved using the constructed CP/rGO/DNA electrode with a linear relationship between the peak current and the concentration of Pb2+ from 1 pM to 100 pM and a detection limit of 1 pM. In addition, this approach shows good selectivity and satisfactory repeatability for river water analysis. A promising sensitive, low-cost, simply-fabricated, and portable full carbon-based electrochemical biosensing platform has been therefore provided for lead determination. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Predatory publishing is the unethical and dishonest behavior of publishers who take advantage of researchers by charging them too much money and not providing good editing and peer-review services. Scholars, publishers and policymakers are seeking solutions to combat predatory publishing, which has become a major academic problem. This research paper provides a bibliometric analysis of the citation patterns and trends in the predatory publishing literature. The study analyzed the 100 top-cited papers on predatory publishing and provided insight into the types of documents, journals, authors, and countries that contributed to this field. The average citation per paper in the top 100 selected publications was 53.67. Open-access publications received a significantly higher average citation per paper than subscription-based papers. "Article" was the major type of document published, followed by "Notes," "Reviews" and "Editorials." Nature and Learned Publishing were the journals that contained the highest number of top-cited articles. J. Beall and D. Moher authored the highest number of papers, while A. Grudniewicz had the highest average citation per paper. USA and Canada were the top countries in these top-cited publications. This study will be beneficial to the all the stakeholders who may be interested in this area of research. [ABSTRACT FROM AUTHOR]

The relationship between environmental regulation and firm productivity has been widely debated but inconsistencies in findings across different studies. Using detailed firm-level micro-data from 2000 to 2007, this paper employs difference-in-difference combined with matching based on entropy balancing method to explore the effect of environmental regulation on firm total factor productivity (TFP) in pulp and paper industry in China. Our main findings are as following: Firstly, stricter environmental regulation, as represented by the Wastewater Discharge Standards for Pulp and Paper Industry in Shandong province, increases firm TFP significantly. Moreover, the coefficients of interest are robust to multiple robustness checks. Secondly, dynamic effects estimates reveal that when faced with this phase-in environmental regulation, firms take the foreseeably increasing strictness into account from the very beginning and prefer to take one-step adjustment to reach full compliance. Thirdly, potential mechanism analysis finds that the positive effect mainly comes from the improvement of resource allocation efficiency within firms. Fourthly, the heterogeneity test indicates that the effect of environmental regulation on firm TFP is heterogeneous across firms with different sizes, ages, ownerships, capital intensity, and export status. Finally, this paper provides convincing and insightful evidence that environmental regulation has the potential to achieve the dual goals of environmental sustainability and economic growth and is thus of broader significance for understanding the enforcement of environmental regulation in developing countries. [ABSTRACT FROM AUTHOR]

This study sought to appraise 7-year and 9-year-old Cedrela odorata for pulp and paper making. Sectioning and maceration processes were adopted. Data were subjected to statistical analysis using SPSS version 17.00. Cell characteristics for all ages and tree positions appeared similar but quantitatively, cells in 9-year-old generally exhibited some significant (p < .05) variations. Age and wood position generally had some significant influence on cell characteristics. Fibre lengths were generally short (<1.6 mm or 1600 µm) with variations in fibre morphology being significant axially than radially. In appraising the wood for paper production, derived fibre indices/values viz; Runkel ratio (ranging from 0.19 to 0.28), flexibility coefficient (ranging from 0.78 to 0.83), and slenderness ratio (ranging from 38.98 to 51.72) appeared to provide some positive indications. The species therefore, has potential for pulp and paper production, but further studies on its chemical consumption levels and other properties need to be ascertained towards a well-informed decision. [ABSTRACT FROM AUTHOR]

Influenced by the academic work of Stephen A. Resnick and Richard D. Wolff, the author and his close collaborator Richard McIntyre have spent four decades closely reading and contributing research to adjacent radical literatures on the empirical history of workers and capitalism. In this response to Richard McIntyre's review of Shredding Paper, the author reveals how his own research into the story of Maine's paper mills has developed since the 1980s, drawing out the class implications of the details embedded in a history that stretches back to the origins of Maine's paper industry. Hillard highlights the efficacy of reading capitalist histories of focusing on subsumed classes, i.e., a "volumes 2 and 3 [of Capital] approach," alongside the much more common "volume 1" methodology common to most radical political economy and labor history. For better and worse, this story has culminated in two generations of rural Mainers rejecting the sensibilities of neoliberal capitalism. This local class formation and particular consciousness of class contains many lessons for those who see capitalism problematically, but in the absence of an established U.S. Left, and given the cultural forces and propaganda acting upon them, this critical culture appears to have moved on. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Results from the natural aging process of copy paper using emission fluorescence spectra are presented in this article. For the study, copy paper examples subjected to aging from 0 to 25 years were selected as test samples. Copy paper shows a well-defined fluorescence spectrum due to the cellulosic compounds used in its manufacture. By analysing each sample's fluorescence bands, relative intensities and the band shifts in the paper's fluorescence spectra, results provide information about the condition of the cellulosic compounds from which we can estimate the paper's age. Results show that the relative intensity of fluorescence emission bands of the copy paper exponentially decay as it ages. As such, fluorescence spectroscopy stands out as a suitable technique for evaluating the deterioration suffered by, for example, art works on copy paper. The effect of incorporating wood extracts on the fluorescence properties of aged copy paper was also studied. Wood extracts soluble in ethanol and acetone appear to enhance the fluorescence emissions, raising the prospect of a novel preservation process. [ABSTRACT FROM AUTHOR]

Transforming Pulp and Paper (P&P) mills into Integrated Forest Biorefineries (IFBR) is a prominent solution to save Canadian P&P industry that has been facing decline of conventional paper demand. We propose a comprehensive decision model for the design of IFBR value chains by taking the uncertain demand of bioproducts into consideration. In particular, we propose a multi-stage stochastic programming model to obtain the optimal investment plan over a long-term planning horizon in the presence of various market trends. We also develop a Monte-Carlo simulation platform to validate the proposed model and to compare its performance with alternative decision models. The model is applied to a realistic case study inspired from P&P companies in Canada, where the value of incorporating the dynamic nature of uncertain demand has been estimated. Further, we elaborate on the value of considering flexibility in terms of adjusting the investment plan in response to changes in the demand. Our results indicate that the demand for bioproducts has a substantial impact on the profitability of the IFBR. We also demonstrated the significant value of explicitly incorporating the uncertainty in IFBR network design as well as adapting the investment plan to the changes in the demand. [ABSTRACT FROM AUTHOR]

AbstractPer- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g−1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10−4% of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide. [ABSTRACT FROM AUTHOR]

This paper focuses on the Southern African Association for Research in Mathematics, Science and Technology Education's (SAARMSTE's) role as a platform supporting research dissemination and connecting researchers in early grades mathematics (EGM) in the Southern African region. A review of the Long Papers in SAARMSTE over the last 20 years supports the finding of the other review papers in this Special Issue: that there has been substantial growth of attention to EGM since 2013. However, two distinctions are marked when looking at conference papers rather than journal papers. Firstly, there is a particularly large expansion of work in the last 5 years, with a broadening base of participation in this work. Second, looking across all the formats of conference presentations indicates SAARMSTE's role in supporting and building EGM as a key focus of research attention, and bringing together regional and international groups with interests in this area. Given that conference proceedings usually offer a broader picture of emerging interests than journal papers, we reflect on the range of foci of attention within EGM in the SAARMSTE Proceedings, and trends within this. These trends also help us to point to areas that are likely to be of key interest in the next decade. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Michael Hillard's Shredding Paper: The Rise and Fall of Maine's Mighty Paper Industry is both a labor history of the paper industry and a political economy of corporate governance and class struggle in the United States. As a labor historian, Hillard has compiled thousands of hours of interviews with paper-industry workers and managers. As a political economist, he persuasively argues that contests over the distribution of surplus from the 1960s forward and shifts in paper-industry ownership led to the strike wave that began in the '60s and spread to every paper mill in Maine by the late 1980s. Rapacious practices by out-of-state owners challenged workers' moral compass as much as their material existence. Responding, paper workers developed a folk political economy and even a folk Marxism, creating the foundation for challenging working-class support for regressive economics. This review provides context for Hillard's claim while partially challenging it in a different context, the United States steel industry. [ABSTRACT FROM AUTHOR]

Copyright of Journal of the American Institute for Conservation is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Gas chromatography – tandem mass spectrometry (GC-MS/MS) using formic acid as a protective agent is reported for the determination of acrylic resin monomers in food contact packaging paper. The analytes were extracted by ethanol mixed with formic acid with 2-phenylethyl propionate as the internal standard. The extract was separated by a 6% cyanopropylbenzene-94% dimethylsiloxane ultra-inert chromatographic column and analyzed by GC-MS/MS in multiple reaction monitoring (MRM) mode. 13 acrylic resin monomers including acrylic acid, styrene, and acrylic ester were separated. The procedure was successfully applied for the analysis of real samples. The procedure provided a linear calibration range with detection limits from 0.16 to 0.46 mg kg−1. The mean recoveries were from 88.1% to 100.9% with relative standard deviations less than 5.4%. The residual acrylic resin monomers in packaging paper were primarily from printing base paper and varnish. Of the acrylic resin monomers, the monomers except for butyl acrylate and 2-ethylhexyl acrylate showed low migration rates. The method provides high sensitivity and good reproducibility with simple pretreatment, demonstrating application for monitoring acrylic resin monomers in food contact packaging paper. [ABSTRACT FROM AUTHOR]

Aging behavior occurs in the storage process of paper archives, which accelerates the aging process of the paper. Therefore, it is important for paper archives management to explore the aging behavior of acidified paper (AP) and to delay or prevent its further aging. The aging behavior of the commonly used university archives paper with artificial acidification were studied by measuring pH value, electrical conductivity, mechanical properties and whiteness. The results show that the pH value, conductivity, mechanical properties and whiteness of AP change significantly compared with the non-acidified raw paper (P). After dry-heat aging treatment, the pH value of AP decreased more obviously than P, which shows more obvious aging degradation and further acidification of AP. During the aging process of AP, the molecular and structural degradation are promoted by the presence of acidic substances, which increase the electrical conductivity of the system. The microstructures of the paper are changed by acidification and aging treatment, and more fiber fracture, etching and microscopic holes are found in the surface SEM images. The reductions of the tensile index and whiteness of AP are also more significant because of the degradation acceleration of the acid. [ABSTRACT FROM AUTHOR]

As an important substrate of traditional Chinese cultural relics in museums, paper is the material with highly light sensitivity, which is susceptible to irreversible lighting damage. To provide high-quality viewing, it is vital to study the parameters of light sources in consideration of paper substrates' long-term conservation. As an important factor affecting both conservation and viewing, there are some issues concerning correlated color temperature (CCT) in the relevant standards, namely, the inconsistent recommended values. In this research, paper samples were subjected to accelerated irradiation experiments for 1440 h by 10 narrow-band lights in the visible range, and the infrared spectra were measured periodically. The calculated oxidation index was used to obtain the damage response function to different spectral wavelengths and exposures. Subsequently, using the method of exhaustion, 9477 spectra with a CCT range of 2650–4150 K that met the viewing requirements were screened, and lighting damage to paper substrates was calculated using this function. Based on that, the correlation between CCT and lighting damage to paper substrates and their standard deviations was obtained. Combining the previous research on recommended for CCT pigments, a preliminary recommended CCT of 3100–3200 K in selecting light sources for traditional Chinese paper relics was proposed. It is worth emphasizing that it is still necessary to use the spectral power distribution of light sources, as the underlying independent variable that leads to damage, to further calculate the lighting damage using the function mentioned above to achieve protective lighting. [ABSTRACT FROM AUTHOR]

Conventional multi-cylinder drying of paper and board involves a mixture of conductive drying from steam-heated dryer cylinders and convective drying by the flow of heated air over the surface of the paper web in the pockets. Pocket ventilation is a critical component in assisting heat and mass transfer during the drying process but is the primary contributor toward removing evaporated water from the web. Air temperature, velocity, and humidity are critical parameters involved in the convective drying process. This paper covers an experimental study involving the design and development of a small lab-scale setup for convective drying of various grades of paper and board, monitoring multiple parameters like paper temperature, moisture content, air humidity, temperature, and velocity measured in situ as the drying proceeds with continuous and accurate sampling capabilities for all parameters in the sample and the system. Instantaneous drying rates, heat, and mass transfer coefficients were also deduced for every time step till the paper completely dried. Furthermore, the coefficients obtained were also reported in the form of dimensionless correlations, and the results were compared against traditional correlations used in the modeling of paper drying. This data will be useful in process development, modeling, design, and the paper drying process simulation. [ABSTRACT FROM AUTHOR]

A Japanese painting paper is sized with an aqueous solution of alum and animal glue followed by brushing with a mixture of pigments of various colours and aqueous animal glue solution. Subsequently, to mount the Japanese painting to a hanging scroll, the backside of the painting is lined with a first lining paper using wheat starch paste for mechanical support. To evaluate the permanence of the painting paper as a composite material in the hanging scroll, the deterioration behaviour of the unlined painting paper and the lined painting paper was compared considering the material dynamics. After moist heat accelerated ageing (80°C, 65% RH), in the sample immersed in a CuSO4・5H2O solution, cellulose was oxidised by Cu2+ to generate organic acids in the painting paper, and Cu2+ and organic acids migrated to the lining paper. Consequently, the discolouration and oxidation of the painting paper in the lined complex were relatively low compared with those of the unlined painting paper. The pH decrease in the painting paper was also small in the lined complex. Moreover, if the animal glue solution was coated on the painting paper, a buffer effect was shown to operate against the organic acids derived from the oxidation of Cu2+, thereby inhibiting the migration of Cu2+ into the lining paper. In conclusion, the presence of the lining paper inhibited the decrease in the physical strength and degree of polymerisation of the cellulose in the painting paper, thus contributing to its permanence in the lined hanging scroll. [ABSTRACT FROM AUTHOR]

Medication prescription procedures were reviewed at psychiatric residential treatment centers (RTC), and a quality improvement project was conducted in order to implement integrated electronic medical records (EMR) and computerized provider order entry (CPOE). To assess the impact of preexisting prescribing practices on RTCs, surveys were sent anonymously to current and past providers of regional and local RTCs. The surveys assessed the impact of the prescribing protocol on workflow, the frequency of medication errors, the impact such errors had on patient care, the overall provider satisfaction, and the discrepancies between electronic and paper charts. Current providers were then re-surveyed after implementing the integrated CPOE system in May 2020, during the COVID-19 pandemic. The first round of provider survey results revealed that the majority of staff (n = 10, 70%) observed frequent medication errors and were largely dissatisfied with the current medication ordering and administration process (n = 10; 70%). Incident Response Improvement System (IRIS) reports revealed the most common medication errors were omissions, incorrect dosing, and incorrect medications administered. After the initiation and implementation of the CPOE, staff satisfaction increased with the process (n = 14; 50%) noting that medication errors were less frequent than before (n = 14; 50%). [ABSTRACT FROM AUTHOR]

Cellulose nanofibrils (CNF) can be modified to be used as a coating on food paper packaging. Previous research on PVA/CNF composites showed a low viscosity, which impacted their performance on the coating paper process. To overcome this problem, a thickening agent, such as carboxymethyl cellulose (CMC), is needed. In this work, the effect of CMC on PVA/CMC/CNF nanocomposites was investigated by varying the concentrations of CMC with PVA/CMC and CNF ratio of 80:20 and 90:10. The nanocomposites were characterized by their physical and tensile properties which could affect their coating performance. Moreover, the coating process was conducted on paper and the performances of the coated paper were studied. The results showed that the increase in CMC concentration led to an increasing viscosity and good zeta potential, suggesting good dispersion. Moreover, the addition of CMC improved the tensile properties of PVA/CMC/CNF nanocomposites. However, SEM analysis of PVA/CMC-1:CNF (80:20) revealed the occurrence of agglomeration which might influence the performance of the coated paper. Interestingly, PVA/CMC-1:CNF (80:20) had an excellent water resistance, with the lowest Cobb60. Moreover, the addition of CMC 1 wt% increased WVTR, which remained lower than the blank sample. Meanwhile, PVA/CMC-2:CNF (80:20) demonstrated the best performance in the oil absorption and tearing resistance test. In summary, the addition of CMC can effectively improve the physical and tensile properties of the PVA/CMC/CNF, as well as the barrier properties and tear strength of the PVA/CMC/CNF coated paper. The results demonstrate the potency of this material as a coating for food packaging paper. [ABSTRACT FROM AUTHOR]

Predictive maintenance strategies are becoming increasingly more important with the increased needs for automation and digitalization within pulp and paper manufacturing sector. Hence, this study contributes to examine the most efficient pre-processing approaches for predicting sensory data trends based on Gated Recurrent Unit (GRU) neural networks. To validate the model, the data from two paper pulp presses with several pre-processing methods are utilized for predicting the units' conditions. The results of validation criteria show that pre-processing data using a LOWESS in combination with the Elimination of discrepant data filter achieves more stable results, the prediction error decreases, and the predicted values are easier to interpret. The model can anticipate future values with MAPE, RMSE and MAE of 1.2, 0.27 and 0.30 respectively. The errors are below the significance level. Moreover, it is identified that the best hyperparameters found for each paper pulp press must be different. [ABSTRACT FROM AUTHOR]

Three grades of pectin xanthates (PX1, PX2, and PX3) have been prepared by the reaction of pectin with carbon disulfide (CS2) in an alkaline medium using NaOH, via the xanthation process. The percentage yield of prepared pectin xanthates has been found to be 87.06%, 90.38%, and 93.80% for PX1, PX2, and PX3, respectively. Prepared pectin xanthates and raw pectin were utilized for heavy metals (Cu(II) and Ni(II)) and lignin enriched paper industry wastewater (LEPIW) treatment. The removal percentage of pectin, PX1, P X2, and PX3 for Cu removal at optimum condition (adsorbent dose: 5.14 g/L, pH: 5 for Cu and 7 for Ni, optimum temperature: 50°C and time: 80 min for Cu(II) and 100 min for Ni(II)) has been found as 85%, 92.33%, 93.5%, and 94.66% and 76.66%, 89.44%, 91.66%, and 93.33%, respectively, for Ni removal. The LEPIW treatment efficacy for pectin, PX1, PX2, and PX3 has been found to be 54%, 77%, 83%, and 86% for the initial COD: 2000 mg/L, pH: 7, optimum temperature: 40°C in 105 min operation time. Adsorption isotherm studies suggest that Langmuir isotherm is most appropriate which indicates adsorption follows chemisorption. The adsorption capacities of PX1, PX2, and PX3 are found as 309.59, 352.11, and 380.22 mg/g for Cu(II) and 299.40, 315.45, and 328.94 mg/g and for Ni(II), respectively, which is very high in comparison with many other recent literature studies. [ABSTRACT FROM AUTHOR]

The Journal of Critical Realism has issued a call for papers for a special issue on "critical realism and the self." The concept of the self is seen as crucial for social change and emancipatory theorizing. The special issue aims to explore various aspects of the self, including subjectivity, reflexivity, authenticity, personhood, and identity. Submissions can be theoretical or applied, and can engage with critical realism or critique it. The deadline for submissions is May 31, 2024, and the final papers are required by November 19, 2024. [Extracted from the article]

The aging process of paper will be accelerated by acidification behavior during the storage process of paper archives, and the mechanical properties of paper archives will be weakened. By deacidizing and strengthening, the further aging of the acidified archives paper can be delayed or prevented, and the mechanical properties can be improved, so that the service life of paper archives is prolonged. To delay even to prevent the aging process, deacidizing and strengthening technology is employed. Herein, the "hybrid" system was reported by combining nano-calcium carbonate as deacidification agent, modified hydroxypropyl cellulose as reinforcement agent and ethanol as dispersant. The artificially acidified paper was brushed with it, and the pH value, mechanical properties and whiteness were measured to study the effect of deacidification and reinforcement. The results showed that oleic acid was successfully grafted onto hydroxypropyl cellulose by N,N′-carbonyl diimidazole mediated method to obtain oleic acid grafted hydroxypropyl cellulose with good dispersion in ethanol. After treating acidified paper with "hybrid" system, the pH value and the tensile strength index increase, the whiteness is almost unchanged, that is, the use of "hybrid" system plays a good deacidifying strengthening effect. The acidified paper samples before and after treatment with "hybrid" system were subjected to dry-heat aging treatment. Compared with acidified paper, the pH value, tensile strength index and whiteness of acidified paper treated with "hybrid" system are effectively inhibited, that is, the use of "hybrid" system can effectively delay the aging and acidification process of paper. [ABSTRACT FROM AUTHOR]

The present study investigated the phycoremediation efficacy of two freshwater green microalgae Chlorella ellipsoidea and Desmodesmus opoliensis for treatment of water of Ellenga beel, a wetland located in the vicinity of Nagaon paper mill and into which effluents of the paper mill are drained-off. After inoculation of water samples with the two freshwater green microalgae, the culture medium were analyzed for various physicochemical parameters such as pH, electrical conductivity, total dissolved solids, phosphate, nitrate, potassium, chloride, phenol, cyanide, biological oxygen demand, chemical oxygen demand and heavy metals at every seven days interval for a period of 42 days. A reduction of phosphate (85%), sulfate (96%), nitrate (76%) and chloride (48%) was observed after 42 days of incubation in the tested beel water. The micro algal incubation also resulted in decrease of heavy metal such as Pb (54%), Zn (98%), Cr (59%), and Cu (61%). Comparison of Fourier transform infrared spectra of beel water samples (control) with those inoculated with the test micro algal species showed presence of binding sites for certain functional groups like phosphate, amide, carbohydrate and alkyl halides in inoculated samples. D. opoliensis exhibited higher phycoremediation efficiency than C. ellipsoidea in removal of pollutants from the beel water samples. [ABSTRACT FROM AUTHOR]

This article discusses how paper artisans in Chosŏn Korea transformed the once government-controlled paper production into their own prosperous trade, by focusing on their techniques for recycling paper. They called the paper they made that was not in use 'resting paper', and referred to its reuse, which they facilitated, as a process of 'returning'. These recycling techniques were unique even among its East Asian neighbours and induced new rules about paper production, including the careful accounting of 'resting paper' by government officials. This essay thus helps illuminate two things thus far less noted in the Chosŏn transformation of production: First, the prominent role of techniques in Chosŏn's productive revolutions (not best characterized as either 'industrial' nor 'industrious') before the twentieth century; and second, the constant negotiations that these recycling artisans had made with the Chosŏn court and its officials. The essay uses the robust recycled paper products still remaining in museums, and new kinds of documents about 'resting paper' and its constant transformers. [ABSTRACT FROM AUTHOR]

An optimised method was established for the determination of four chloropropanols in paper straws, namely 1,3-dichloropropan-2-ol(1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP), 3-monochloropropane-1,2-diol (3-MCPD) and 2-monochloropropane-1,3-diol (2-MCPD). After extraction with a food simulant, purification with matrix solid phase dispersion (MSPD), and derivatisation using heptafluorobutyrylimidazole (HFBI), the chloropropanols were analysed by gas chromatography–tandem mass spectrometry (GC-MS/MS), and quantified with a deuterated internal standard. Under the optimised conditions, the limit of detection (LOD) was 0.200 µg/L for the four target compounds. The recoveries were in the range of 71.4% – 119.4% with relative standard deviations (RSDs) of 0.4% – 9.9%. The method fulfilled the requirements of the European regulations for the quantification of 3-MCPD and 1,3-DCP. Fifteen paperboard straws were tested using the proposed method. The results showed that 1,3-DCP and 3-MCPD exhibited the highest detection rate among the four chloropropanols tested (93.3%). the method can be used to detect chloropropanol contamination in paperboard products, and further to guide food manufacturers to reduce the levels of chloropropanols in paperboard food contact materials. [ABSTRACT FROM AUTHOR]

The recovery rate of paper products is a key factor in measuring the recyscling potential and the sustainability of the paper industry. Accurately measuring the recovery rate of paper products holds important theoretical and practical value. This paper took the non-recycling part and time factor into account and built the Koyck model to estimate the recovery rate, storage loss rate and recovery cycle of paper products. The model results showed that the recovery rate of Chinese paper products in 2017 increased to 58.05%, which was 10% higher than the results of methods that did not contain the non-recycling part or the time factor. The model results also showed that the storage loss rate of Chinese paper products was much higher than that of developed countries while the recovery cycle was close to the level of developed countries. The distribution analysis showed that the storage loss rate and recovery cycle of Chinese paper products varied significantly over time, which may be the result of policies and the change of consumption structure. It is suggested that the Chinese government should take measures to reduce the storage loss rate of paper products and enhance their recycling ability to achieve sustainable development. [ABSTRACT FROM AUTHOR]

The aging and acidification behavior of paper archives affect their long-term preservation. Therefore, delaying or preventing aging and acidification has become an important topic in the field of paper archives management. the aging and acidification behavior of commercial archival paper were studied by measuring pH value, electrical conductivity, mechanical properties and whiteness in this work. The results show that the aging and acidification phenomena are obvious after dry-heat aging treatment. The molecular degradation of cellulose, hemicellulose, lignin and other components results in the decrease of pH value of the system, which decrease with the increase of the treatment temperature and time. The electrical conductivity of the system increases because of the molecular degradation and structural degradation, and with the increase of the treatment temperature and time, the electrical conductivity increases more significantly. After aging treatment, the paper appears etching and increasing microcosmic pores. With the occurrence of molecular degradation and structural degradation, the tensile index and whiteness of the paper decrease, and with the increase of the treatment temperature and time, the tensile index and whiteness decrease more significantly. [ABSTRACT FROM AUTHOR]

As a kind of synthetic aromatic polyamide, aramid fiber has many outstanding properties, such as high strength, high modulus, etc. The composited paper reinforced by aramid fiber is widely used in honeycombs and its strength is of great concerns. In this paper, a three-dimensional progressive failure phase field model is employed to investigate the failure mechanism of aramid honeycomb paper under microscopic length scale. A mesh mapping technique is used to handle the complex geometry of the material, and an explicit solving scheme is used to improve the solving efficiency. The theory is implemented into ABAQUS through the users' subroutine VUEL. The interfacial debounding and matrix cracking in the short fiber reinforced composite are captured successfully, and the complicated failure mechanism is explored from the modeling results. The present phase field modeling technique has provided a useful numerical tool for the strength prediction of aramid short fiber reinforced composites. [ABSTRACT FROM AUTHOR]

The alarming global deforestation rate has great impacts on the output of the Pulp and paper Industry since wood is the principal papermaking fiber material. Although, generally, bamboo is an alternative cellulolytic fiber source, the species and culm age have great effects on its papermaking potential. Based on the methods by the International Association of Wood Anatomists (IAWA), this work assessed the characteristics of fibers from the axial culm sections of six-month plantation-grown Oxythenantera abyssinica and Beema bamboo (which was cloned from Bambusa balcoaa) for paper production. The lengths of the fibers ranged from 1.89 to 2.39 mm while the diameters were 0.025–0.031 mm. The fiber lumen diameter and wall thickness were 0.014–0.018 mm and 0.004–0.006 mm, respectively. Fibers from the species had their runkle ratios below 1, slenderness ratios above 70 and flexibility ratios above 50. These characteristics compare well with the recommendations for fibers often used for the production of packaging, writing and printing papers. Establishment of plantations of Beema bamboo and O. abyssinica is encouraged as they will serve as good raw material base for the paper industry within six months of planting. Additionally, their planting will contribute to meeting Sustainable Development Goals 1 and 13. [ABSTRACT FROM AUTHOR]