Search

Both the mean contact force difference and the standard deviation of the contact force were minimised in the presented optimised design of a pantograph–catenary system for the purposes of improving of the current collection quality and the reduction of the contact wear. The non-dominated sorting genetic algorithm-II (NSGA-II) was applied to optimise the pantograph–catenary interaction system. The adopted NSGA-II algorithm was improved by avoiding repetition of FEM simulations with the duplicated input parameters and retaining only one of the duplicated results for the next generation selection. Either the catenary or the pantograph can be optimised individually by using the proposed versatile approach. In this research, the design optimisation of the catenary system was conducted first. After that, the pantograph was further optimised based on the optimised design of the catenary system. A case study indicated that the standard deviation of the contact force was reduced by 33.4% in the optimised catenary design and 39% in the optimised pantograph design, and the contact force differences were reduced by 98.3% and 99.9% in the optimised catenary design and the optimised pantograph design, respectively. Highlights Both the standard deviation of the contact force and the difference between the actual mean contact force and the ideal mean contact force are minimised in the optimisation design of a pantograph–catenary system. Either the catenary or the pantograph can be optimised separately by using the proposed versatile approach. Non-dominated Sorting Genetic Algorithm-II (NSGA-II) was improved by avoiding repetition of finite element method simulations with the same input parameter combinations and retaining only one of the same results for the next generation selection. A case study indicates that the standard deviation of the contact force can be reduced by 33.4% in the optimised catenary design and 39% in the optimised pantograph design, and the contact force difference can be reduced by 98.3% and 99.9% in the optimised catenary design and the optimised pantograph design, respectively. [ABSTRACT FROM AUTHOR]

Two pot experiments were conducted to study the effects of intercropping with cadmium (Cd) accumulator plant Eclipta prostrata and hyperaccumulator plant Crassocephalum crepidioides on the growth and Cd accumulation of tomato seedlings. In the preliminary experiment, intercropping with E. prostrata and C. crepidioides promoted the growth and decreased the Cd content in roots and shoots of tomato seedlings. In the further experiment, intercropping with E. prostrata and C. crepidioides had the same effects on the growth and Cd content of tomato seedlings as the preliminary experiment. In the further experiment, when three plant species (E. prostrate, C. crepidioides and tomato) intercropping together, the root and shoot biomasses of tomato seedlings got the maximum, and the Cd content in tomato seedlings got the minimum. Compared with the monoculture of tomato, three plant species intercropping increased the root and shoot biomasses of tomato seedlings by 49.28% and 64.19%, respectively, and decreased the Cd contents in roots and shoots of tomato seedlings by 17.35% and 22.35%, respectively. Intercropping with E. prostrata and C. crepidioides also increased the photosynthetic pigment content and enhanced the antioxidant enzyme activity of tomato seedlings. For accumulator and hyperaccumulator plants, intercropping with tomato inhibited the growth of E. prostrata and C. crepidioides, while increased the Cd content in two plant species. Therefore, intercropping with E. prostrata and C. crepidioides could promote the growth and reduce the Cd uptake of tomato seedlings, and three plant species intercropping together was the best combination. [ABSTRACT FROM AUTHOR]

Designing roller cavity surfaces for rolling blades is a nontrivial task. This paper presents a new method to design cavity surfaces for rolling compressor blades with considering the springback and forward slip compensation. Firstly, a springback compensation model was proposed to modify the shape of section curves, and a forward slip model was proposed to determine the location of section curves to compensate the springback and forward slip in rolling process. Secondly, an algorithm was proposed to transform the updated section curves to the cavity section curves around the roller axis. The cavities were reconstructed through the transformed section curves. Finally, the designed roller cavities for a variable cross-section compressor blade were validated by the finite element method and experiment. The results revealed that the designed cavities meet the net shape precision at pressure and suction surfaces of the blade. The compensated design of cavities for blade rolling can save both time and costs while keeping excellent design quality. [ABSTRACT FROM AUTHOR]

Traumatic brain injury (TBI), induced by impact of an object with the head, is a major health problem worldwide. Rats are a well-established animal analogue for study of TBI and the weightdrop impact-acceleration (WDIA) method is a well-established model in rats for creating diffuse TBI,the most common form of TBI seen in humans. However, little is known of the biomechanics of the WDIA method and, to address this, we have developed a four-degrees-of-freedom multi-body mass-spring-damper model for the WDIA test in rats. An analytical expression of the maximum skull acceleration, one of the important head injury predictor, was derived and it shows that the maximum skull acceleration is proportional to the impact velocity but independent of the impactor mass. Furthermore, a dimensional analysis disclosed that the maximum force on the brain and maximum relative displacement between brain and skull are also linearly proportional to impact velocity. Additionally, the effects of the impactor mass were examined through a parametric study from the developed multi-body dynamics model. It was found that increasing impactor mass increased these two brain injury predictors. [ABSTRACT FROM AUTHOR]

The finite element method was used to simulate indentation tests on a particle embedded in a matrix, to investigate the influence of the properties of the particle and the matrix, and the indentation depth on the measured hardness. The particle’s work-hardening exponent and the mismatch in particle and matrix yield strength have a significant influence on the measured hardness. A particle-dominated indentation depth was identified, within which the measured nanoindentation hardness agrees very well with the true hardness of the particle material. Numerical results from the simulations of a wide range of material properties determined that the measured hardness is within 5% difference of the particle’s true hardness when the indentation depth is less than 13.5% of the particle’s radius. The results can be used in practice as a guideline to measure the hardness of a particle embedded in a matrix and provides the theoretical basis to develop a particle-embedded method to measure the hardness of individual particles. [ABSTRACT FROM PUBLISHER]

The main objective of this article is to mechanize the procedure of tracking and describing the various phases of deformation of a biological circular cell during micromanipulation. The devised vision-based methodology provides a real-time strategy to track and describe the cell deformation by extracting a geometric feature called dimple angle. An algorithm based on Snake was established to acquire the boundary of the indenting cell and measure the aforementioned feature. Micromanipulation experiments were conducted for zebrafish embryos. Experimental results were used to characterize the deformation of the manipulating embryo by the devised geometric parameter. The results demonstrated the high capability of the methodology. The proposed method is applicable to the micromanipulation of other circular biological embryos such as injection of the mouse oocyte/embryo. Supplemental materials are available for this article. Go to the publisher's online edition of theInternational Journal of Optomechatronicsto view the supplemental files. [ABSTRACT FROM AUTHOR]

A recently published finite element (FE) head model is modified to consider the viscoelasticity of the meninges, the spongy and compact bone in the skull. The cerebrospinal fluid (CSF) is simulated explicitly as a hydrostatic fluid by using a surface-based fluid modelling method, which allows fluid and structure interaction. It is found that the modified model yields smoother pressure responses in a head impact simulation. The baseline model underestimated the peak von Mises stress in the brain by 15% and the peak principal stress in the skull by 33%. The increase in the maximum principal stress in the skull is mainly caused by the updation of the material's viscoelasticity, and the change in the maximum von Mises stress in the brain is mainly caused by the improvement of the CSF simulation. The study shows that the viscoelasticity of the head tissue should be considered, and that the CSF should be modelled as a fluid, when using FE analysis to study head injury due to impact. [ABSTRACT FROM AUTHOR]