Search

In present work the properties of iron-doped indium tin oxide (ITO) films with reduced to 50 mass% indium oxide content prepared by co-sputtering of ITO and Fe2O3 targets and ITO and Fe3O4 targets in mixed argon–oxygen atmosphere were studied by various methods. The influence of different working gas flow rates, RF power of iron oxide targets, type of doping oxide and heat treatment temperatures on the electrical, optical, structural, and morphological properties of the films was characterized by means of four-point probe method, ultraviolet–visible (UV–Vis) spectroscopy, X-ray diffraction and atomic force microscopy. [ABSTRACT FROM AUTHOR]

Silicon nano- and microparticles obtained using electric-spark dispersion of silicon electrodes and granules in 40 wt% solution of methyl alcohol in water were investigated by ultrasoft X-ray emission spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, scanning and transmission electron microscopies. In addition, the SiLα spectra of obtained silicon particles were modeled by superimposing the spectra of pure silicon and silicon oxide taken in certain weight ratios. It was found that the surfaces of Si nano- and microparticles obtained in 40 wt% solution of methyl alcohol in water are covered with silicon oxide and chemisorbents, while the core consists of crystalline silicon with a cubic face-centered lattice. The silicon nano- and microparticles show potential as an anode material to replace commonly used graphite electrodes. The charge capacity of the electrode based on mixture of Si nano- and microparticles with graphite powder was about 1272 mAh/g after ten cycles. [ABSTRACT FROM AUTHOR]

Hollow graphitic carbon nanoparticles (HGCNs) obtained by catalytic graphitization of acetylene carbon black (ACB) were investigated using ultra-soft X-ray emission spectroscopy. The electronic structures of the ACB HGCNs were compared with those of HGCNs obtained from iron carbide-filled carbon nanocapsules (Fe3C@CNCs) and Q-graphenes. The occupation of the π sub-band decreased in the following sequence: Fe3C@CNC HGCNs > ACB HGCNs > Q-graphenes. This sequence can be explained by changes in the occupations of the C2p states due to the formation of bonds between carbon and residual metal atoms within the HGCNs. It was also found that the contribution of the overlapping ofppπ+ppσ-states in the ACB HGCN walls toward the spectra of the HGNCs was greater in comparison with the reference Q-graphenes. It was established that ACB was not fully transformed into the HGCNs. Scanning and transmission electron microscopy methods were used to study the spatial structures and morphologies of the fabricated HGCNs. [ABSTRACT FROM PUBLISHER]