Search

The constant presence of triclosan (TCS) in surface water and wastewater has been verified due to its application in several pharmaceutical and personal care products. Thus, removing this emerging contaminant is essential to minimize the contamination of water bodies. The anaerobic–aerobic-anoxic (AOA) system is an innovative alternative that combines the removal of nutrients and triclosan. This study focuses on the simultaneous removal of carbonaceous matter, nitrogen, phosphorus, and triclosan in a continuous pilot-scale AOA system from synthetic wastewater. The upflow system, in series, was operated at hydraulic retention time (HRT) of 8 h and a flowrate of 2.40 L h−1. Glucose (190 mg L−1) was added to the anoxic reactor as the external carbon source. Besides that, bacterial community structure was investigated using 16S rRNA sequencing in each reactor. The system achieved average removal efficiencies of 96% (14.03 g d−1) for Chemical Oxygen Demand (COD), 85% (2.64 g d−1) for Total Kjeldahl Nitrogen (TKN), 88% (1.40 g d−1) for Total Ammonia Nitrogen (TAN), 20% (0.12 g d−1) for Total Phosphorus (TP), and 93% (1.87 μg d−1) for Triclosan (TCS). The phyla Proteobacteria, Firmicutes, Bacteroidetes, and Chloroflexi were found in greater abundance. The main genera identified were Anaeromusa, Aeromonas, Azospira, Clostridium, and Lactococcus. The organisms related to phylum and genus corroborate the involved processes and the removal performance achieved. In addition, Lactococcus, Thermomonas, Ferruginibacter, and Dechloromonas were involved in triclosan biodegradation. The anaerobic-oxic–anoxic system successfully removed carbonaceous, nitrogenous matter, and triclosan, with glucose increasing the denitrifying activity. [ABSTRACT FROM AUTHOR]

The upflow anaerobic hybrid (UAHB) reactor combines the advantages of a upflow anaerobic sludge blanket (UASB-type) reactor and an anaerobic filter in a single compartment. A novel configuration of the UAHB reactor, composed of two three-phase separators (3PHS), was proposed to evaluate the biogas production in the moving and fixed bed in the treatment of synthetic sewage at a temperature range of 14–21 °C and hydraulic retention time (HRT) of 12, 10 and 8 h. The bench-scale reactor was operated in three different phases with organic loading rate (VOLR) of 0.6 (0.3–0.7), 0.7 ± 0.2, and 1.1 ± 0.1 kg COD m−3 d−1, respectively, for 225 days. The average removal efficiency of chemical oxygen demand (CODt) was 78 (42–89)%, and the total biogas yield was 3090 (1704–4782) mL d−1, with 66% of the lower 3PHS (moving bed) and 34% of the upper 3PHS (fixed bed). However, no significant difference was observed between the biogas yield on the 3PHS (p-value = 0.5048), thus confirming the influence of temperature in the biogas production. The average percentage of methane was 76 (60–82)% for both beds, and the filter media increased the production by 21%. Thus, it can be concluded that the fixed bed suppressed the instability of the moving bed regarding the biogas production and contributed to the final quality of the effluent. [ABSTRACT FROM AUTHOR]

Recent studies point out losses of 30–40% of the produced methane in the effluent of anaerobic reactors treating sewage, reducing the renewable energy potential and the environmental footprint. A novel bench-scale upflow anaerobic hybrid (UAHB) reactor combining a sludge blanket at the bottom and a filter media at the top, both with three-phase separators, was proposed to evaluate the recovery of dissolved methane. UAHB was operated with volumetric organic loading rate of 1.24 kg COD m−3 d−1 and hydraulic retention time of 8 h for 218 days to evaluate the influence of temperature (18°C, 23°C, and 28°C) in the methane dissolved in the effluent and collected from three-phase separators. Chemical oxygen demand (COD) and total suspended solids (TSS) removals efficiencies remained constant during the operation and equal to 90 and 95%, respectively, related to the activity of biomass retained in the filter media. Temperature increase influenced more the methane production in the sludge blanket rather than in the upper bed. The volume of recovered methane increased about 20% with the installation of the support media and the upper three-phase separator (3PHS). The loss of methane dissolved in the effluent was strongly influenced by the temperature, and higher with the decrease of this parameter. Non-statistically significant correlations were observed between the temperature and the methane production in the upper bed (p-value = 0.0943) and total (p-value = 0.0930). Thus, it can be concluded that the evaluated temperatures did not influence the global efficiency and the total methane yield of the UAHB reactor. [ABSTRACT FROM AUTHOR]