Search

Objective: The way how individual bars of sensorimotor insoles influence the gait kinematics is not fully understood yet. Therefore, this study aimed to explore the effect of three sensorimotor orthotic conditions (the medial calcaneal and retrocapital lateral bars and their combination) on the gait parameters in healthy adults during the stance phase of gait cycle. Materials and methods: Twenty-six young adults performed 20 gait cycles in each condition using their self-selected cadence and provided standardised shoes with the base-sole and the three types of orthotics. A three-dimensional motion analysis system (8 cameras; 200 Hz) was used and a six-degrees of freedom model was applied. The cadence, the stride length, the first peaks of foot external rotation, eversion and dorsal flexion as well as the first peak of hip adduction were analysed. Results: Significant differences (p < 0.05) were found for all parameters between the orthotic conditions, except the cadence. Significant difference in the first peak of hip adduction (p = 0.008) was found between the dominant and non-dominant leg. There were no significant interactions between the factors of condition and leg dominance (p > 0.05). Conclusions: There seems to be overall tendencies in immediate changes in ankle joint kinematics caused by all three sensorimotor orthotic conditions and besides the mechanical principles, also 'proprioceptive mechanism' seems to play a role. However, maximum observed average angular change was 2° and some variability in reactions to each orthotic condition exists among the individuals. Therefore, clinical relevance of such changes remains unclear and careful analysis of expected outcomes should be the common part of every orthotic intervention. [ABSTRACT FROM AUTHOR]

Objective: This study aimed to investigate the foot contact time differences between obese and non-obese subjects during walking when crossing obstacles. Methods: Ninety-eight postmenopausal women were assigned to four groups, and their plantar pressure temporal data were collected using a two-step protocol during walking when crossing an obstacle set at 30% height of lower limb length of each subject. The initial, final, and duration of contact of 10 foot areas were measured. Results: Leading limb: (1) the heel groups initiated foot contact using the heel, and the non-heel groups initiated contact using the metatarsals; (2) heel obese subjects showed an earlier initial contact and a longer contact duration of metatarsals 2-3; (3) non-heel obese subjects showed an earlier midfoot initial contact. Regarding the trailing limb: (4) heel obese subjects showed an earlier midfoot initial contact and a longer contact duration of metatarsal 5; (5) non-heel obese subjects showed an earlier initial contact and a longer contact duration of metatarsals 4-5. Conclusions: (1) The non-heel groups' foot rollover pattern may result from an attempt of rapidly restoring stability; (2) the heel obese subjects seem to regulate their plantar foot muscles to overcome their overweight; (3) the overweight of the non-heel obese subjects leads to a quicker backward foot roll-over from the metatarsals to the heel; (4) the overweight of the heel obese subjects can distort their footprints and/or their higher inertia may precipitate an anticipation of the midfoot contact, which can also explain the result observed for 5. [ABSTRACT FROM AUTHOR]

The purpose of this study was to compare the temporal foot rollover data between straight-ahead and side-cut walking and to establish a reference dataset for obese and nonobese postmenopausal women. Pressure data were collected using the two-step protocol. The initial, final, and duration of contact of 10 foot areas were measured, as 5 instants and 4 phases. Significant temporal foot rollover differences were found during walking with and without directional changes; however, most of these differences were common for obese and nonobese subjects.The trailing limb during the side-cut task anticipated the initial and final contact of the lateral forefoot and increased midfoot and toes duration, suggesting a greater role of these areas in the initial break and in foot stability. The leading limb throughout the side-cut task exhibited longer duration of the heel, midfoot, and stance phase probably due to an increase in the stride length of the trailing limb and leaning of the trunk toward the inner side of the turn. Additionally, obese women revealed a later final contact and longer contact duration of some metatarsal areas suggesting that the greater inertia of these subjects demands more time to stabilize and prepare the foot for the next step. Please provide 3 to 5 keywords for the article. [ABSTRACT FROM AUTHOR]

Stable, convergent, and fast computing codes have been developed to describe heat or cold discharge from encapsulated phase-change materials (PCMs). Numerical algorithms are based on previous transformations of relevant variables to yield immobilization of the moving boundary and also a flat-like condition to enhance convergence of the computing codes. These algorithms are used to analyze heat transfer limitations imposed by the low conductivity of the solidifying PCM layer and the mixed control related to the thermal resistance of the encapsulated wall and/or heat transfer limitations to the external fluid. The stability and the convergence of the codes are analyzed by varying the mesh size, and the relative time step, and are also compared with a space grid method solution. Quasi-steady-state solutions are also proposed and their applicability examined. [ABSTRACT FROM PUBLISHER]

We investigated the mechanical properties of the triceps surae between professional, junior, and non-football players. Fifty-nine men participated in this study. The mechanical properties of the right legs’ triceps surae were measuredin vivousing a free oscillation technique; no significant differences existed between the groups. The mean results for musculo-articular stiffness, damping coefficient, and damping ratio were as follows: professional football players (21523 N· m−1, 330.8 N · s · m−1, and 0.201); junior football players (21063 N · m−1, 274.4 N · s · m−1, and 0.173); and non-players (19457 N · m−1, 281.5 N · s · m−1, and 0.184). When analysed according to position, the results were as follows: defender (21447 N · m−1, 308.6 N · s · m−1, and 0.189); midfielder (20762 N · m−1, 250.7 N · s · m−1, and 0.157); winger (21322 N · m−1, 335.1 N · s · m−1, and 0.212); forward (22085 N · m−1, 416.2 N · s · m−1, and 0.254); and non-players (19457 N · m−1, 281.5 N · s · m−1, and 0.184). Thus, football training, football games, and the position played had no effect on triceps surae mechanical properties. These results may be attributed to opposing adaptations between different types of training that are usually implemented in football. Alternatively, the minimum strain amplitude and/or frequency threshold of the triceps surae required to trigger adaptations of mechanical properties might not be achieved by football players with football training and matches. [ABSTRACT FROM AUTHOR]

This work presents a general three-dimensional multibody procedure for studying the human body motion with emphasis on the locomotion apparatus. The methodology includes a three-dimensional biomechanical model, data acquisition techniques and an inverse dynamics approach. The biomechanical model is based on a multibody formulation using natural coordinates and consists of 16 anatomical segments modeled by 33 rigid bodies for a total of 44 degrees-of-freedom. The action of the muscles is introduced in the equations of motion of the multibody model by means of driver actuators defined as kinematic constraints. By associating a Lagrange multiplier to each muscle actuator the muscle forces became coupled with the biomechanical model through the Jacobian matrix of the underlying multibody system. A Hill type muscle model is used to calculate individual muscle forces. The model for the muscle apparatus comprises 43 muscle groups for each leg, which use the full three-dimensional lines of action for these muscles in their geometric description. The problem of the redundancy of the forces on the musculoskeletal structure is solved by using inverse dynamics and static optimization methods. In the process of describing the methodology the benefits of modeling in natural coordinates are highlighted. The methodology developed is demonstrated through its application to a case of ballistic motion, represented by the take-off to an aerial trajectory in order to estimate the joint torques and the muscle force distribution in the supporting leg. The time characteristics of the resultant net torques at the basic joints of the supporting leg and the time-varying muscle force patterns are presented and discussed. The results obtained are explained in terms of their relevance to the activity under study. [ABSTRACT FROM AUTHOR]