Search

An electro-conjugate fluid (ECF) is a type of dielectric and functional fluid that generates a powerful jet flow when subjected to high DC voltage. Although a high voltage is needed to generate the jet flow, the current is quite low at several microamperes, resulting in a total power consumption of several milliwatts. Using this smart fluid, we can develop micro fluid-driven mechanical components without any bulky pumps. Also, it is clarified that the power density of the ECF jet is higher when the electrode pair is miniaturized; therefore, it is suitable for micro actuators. Here, we propose and fabricate three types of soft actuators with an antagonistic configuration: (i) micro artificial muscle cells, (ii) a McKibben-type micro artificial muscle actuator using the ECF effect and (iii) a micro finger actuator with two chambers to bend. The actuators basically consist of a silicone rubber tube covered with a fiber sleeve and a micro pressure source using the ECF effect. Next, we apply and integrate these actuators into a micro robot hand, driven with ECF jets. The driving characteristics of the micro artificial muscle actuator and the integrated micro ECF hand with ECF fingers were fabricated and experimentally investigated. The experimental results show that this ECF jet actuation is effective for driving soft micro hands. [ABSTRACT FROM AUTHOR]

Robots manipulated by humans are being aggressively researched and developed. Such robots have requirements such as a large generative force, high-speed response, good controllability, high safety, low friction and backdriveability. We focused on backdriveability and created a prototype for a novel linear actuator with a new structure that includes an electrorheological (ER) gel, which is a recently designed functional material. The device is an all-purpose actuator that satisfies the demands for application in a human-coexistence welfare robot, such as power-assist systems. This paper presents the original plan for the linear actuator, shows the actuator as currently manufactured and presents the basic characteristics of the actuator as investigated experimentally. We obtained larger force from the linear actuator than the initial target. Additionally, the linear actuator shows possibilities of further improvement of the force-weight ratio by an increase of the ER gel structures. With regard to stabilizing the response of the linear actuator, spring elements contributed to its improvement. However, further stabilization remains as a future issue for practical use in human-coexistence robots. [ABSTRACT FROM AUTHOR]

A bucky gel actuator is a novel electro-active polymer (EAP), which is a low-voltage-driven dry soft actuator. In addition, the bucky gel device generates electromotive force when bending and then it can also be used as a sensor. Its device has a bimorph structure with polymer-supported bucky gel electrodes and a polymer-supported ionic gel electrolyte. It can be fabricated by layer-by-layer casting to easily form any shape. In this paper, we demonstrate an automatic fabrication method of bucky gel devices based on a printing method. By using a dispensing machine, we construct the printing system and the manual forming process is replaced with automatic printing. We investigate the printing of complicated shapes and three-dimensional electrode patterns through experiments. [ABSTRACT FROM AUTHOR]

We are studying the robotic application of ionic polymer–metal composite (IPMC). The characteristics of IPMC greatly depend on the type of counterions, and it is considered that the performance of the actuators can be improved by combining the actuators with several types of counterions and applying an integrated control. IPMC also has a sensor function, as the IPMC film generates an electromotive force when it is deformed. It has the possibility to be integrated into an IPMC actuator with soft actuation. In this paper, we consider an integrated design of an IPMC actuator/sensor, and investigate control of the combined IPMC actuators using H∞ control and the construction of an IPMC sensor system. [ABSTRACT FROM AUTHOR]

We are developing an artificial muscle linear actuator using ionic polymer-metal composites (IPMC)—electro-active polymers that bend in response to electric stimuli—and the goal of our study is applying the actuator to robotic applications, especially to a biped walking robot. In this paper, we will describe the structure of the actuator and an empirical model of the actuator which has two inputs and one output, and whose parameters are identified from input-output data. Based on the empirical model, basic experiments and position control of the linear actuator are demonstrated. Then, we consider walking control of a small-sized biped walking robot. In the application we assume that the developed actuators are connected both in series and in parallel to a joint of the walking robot so that the actuators supply enough torque to the robot, and that they are stretched and compressed enough. It is shown throughout simulations that the biped walking robot with the actuators can walk on level ground with a period synchronized with the period of the input signal. [ABSTRACT FROM AUTHOR]