Search

This paper discusses the potential of using palm-castor oil blends as lubricating oil in industrial applications. Laboratory experiments to measure kinematic viscosity, flash point, copper corrosion, demulsibility, pour point and total acid number were conducted and compared with commercial lubricating oils. Change in kinematic viscosity with temperature of different palm-castor blends were best fitted to the Arrhenius model with R2 value higher than 0.95 and AARD% is less than 1.5%. Addition of 40 and 50% of castor oil to 60 and 40% of palm oil resulted solutions with similar properties of Hydraulic68 and SAE30, respectively. [ABSTRACT FROM AUTHOR]

Oils and grease have beneficial effects on moving parts such as connecting rod, gears, shafts, and engine to reduce wear and friction. The properties of lubricants such as tribological and rheological properties are an important role in oils and grease characterization. Nano additives on lubricant oils play an important role in anti-wear; reduce the coefficient of friction and enhance the rheological properties. The Tribological and rheological behavior of base oil 15W50 which have different concentrations of multi-wall Carbon Nanotubes (MWCNTs) (0.5, 1, 1.5, and 2 wt%), and constant amount of graphene nanosheets (GNSs) (0.5 wt%) were investigated. This research is the first one in studying the effect of hybrid nano additives of (MWCNTs) and (GNs) on the tribological and rheological properties of lubricant oils. Tribological characterization was carried out on four ball testing model under different loads (200, 400, 600, and 800 N). The kinematic viscosity, flash point, pour point, and thermal conductivity of nanofluid added 15W50 lubricant are estimated and compared with base oil. The results showed that nano additives improve the wear scar and coefficient of friction by 78% and 48%, respectively. The flash point, thermal conductivity, kinematic viscosity, and pour point, were improved by 15%, 77%, 76.8%, and 20%, respectively compared with the base oil. The hybrid addition of CNTs/GNs nanoparticles enhanced the properties of 15W50 engine oil. [ABSTRACT FROM AUTHOR]

The application of vegetable oil based additive for lubricating oil has attracted considerable interest due to their biocompatibility and multifunctional performances compared to conventional additives. In the present work, we have synthesized homopolymer of castor oil and copolymer of castor oil with styrene by thermal method without any solvent at different percentage composition by using BZP (benzoyl peroxide) as initiator. Characterization of the additives was completed by spectral technique (FT-IR and NMR spectroscopy). The molecular weight of the prepared additives was determined by gel permeation chromatography method (GPC method). Thermo gravimetric analysis (TGA) method was used to study the thermal stability of the prepared polymers. Standard ASTM methods were used to investigate the performance of all the prepared polymers in SN150 mineral oil as viscosity index improver (VII), pour point depressant (PPD) and antiwear. Biodegradability of all the polymers was determined disk diffusion method. From the experimental results, it was found that copolymers are more effective as VII, PPD and antiwear than homopolymer. Moreover, average molecular weight, thermal stability and performances as VII and antiwear increase with increasing the percentage of styrene in copolymers. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to evaluate carbon spheres as a green lubricant additive in 5W30 engine oil to reduce friction and wear. Carbon spheres with a diameter of ∼400 nm are synthesized from glucose by using a hydrothermal process. Lubrication is studied using a ball-on-disk tribometer by measuring the friction coefficient and wear in the boundary lubrication regimes. The worn surfaces were analyzed by Raman spectroscopy. Carbon spheres are found to be stably dispersed at 0.5 wt% concentration in base oil. The experiments revealed that carbon spheres are effective in reducing both friction and wear when lubricating by using base oil. Raman results show that the enhanced tribological performance is owing to a carbon-rich boundary film, the formation of which is attributed to the deposit of carbon particles during the sliding process. [ABSTRACT FROM AUTHOR]

Homopolymer of rice bran oil and its copolymer with dodecyl acrylate and styrene were synthesized and characterized by spectral (NMR, IR), thermogravimetric analysis and gel permeation chromatographic methods. Performance of these polymers was evaluated by standard ASTM methods in base oil and showed very effective as pour point depressants and viscosity modifiers. Biodegradability of all these polymers was tested which showed excellent results. A comparison of their performances has also been evaluated and reported. The copolymers showed biodegradability in addition to the multifunctional additive performance (PPD and VM), and so are considered as being more useful in field applications compared to the existing conventional additives. [ABSTRACT FROM AUTHOR]

Carbonium ion can be generated easier when low-carbon alcohols are added to hydrocracking tail oil, which initiate the cracking reaction of macromolecular n-paraffin. So the yield of lube oil base oil increases, while that of paraffin decreases, but the total yield of the two products increases. When the low-carbon alcohol is added to the raw oil for non-hydrodewaxing reaction of hydrocracking tail oil, the pour point of lubricating oil base oil declines, the flash point and the viscosity increases slightly, and the distillation range of paraffin declines slightly, but the properties of products changes little, so they can meet the actual production requirements of the factory. By examining the influence of low-carbon alcohol on the yield and properties of lubricating oil base oil and paraffin, tert-butyl alcohol is an ideal chain initiator, and the most suitable addition is 1.0 w%. [ABSTRACT FROM AUTHOR]

Re-refining of used lubricating oil has appeared as a valuable technique to re-refining of used engine and industrial oils. This paper focused on the vacuum distillation thin wiped film evaporation technique of used lubricating oil recycling. The whole process consists of dehydration, gas oil evaporation, thin wiped film evaporation and clay treatment. The produced base oils are in group I through determination of sulfur contents, percentage of saturate compounds and viscosity indexes. The obtained results are practicable with most of the American Society for Testing and Materials (ASTM) properties and reduced most of worn metals in the refined base oils. [ABSTRACT FROM AUTHOR]

Homopolymer of acrylate of a mixture of myristyl (C14), dodecyl (C12), and decyl (C10) alcohols in 2:1:1 molar ratio was synthesized by two different ways, microwave-assisted method and thermal method using benzoyl peroxide as initiator. The polymers were characterized by spectroscopic (NMR, IR) and viscometric analysis. Performances of each of them as a pour point depressant and viscosity modifier for lubricating oil (lube oil) were also evaluated by standard ASTM methods. Oil thickening property of the polymers has also been investigated and reported here. Thermal stability of the polymers was determined by thermogravimetric analysis. [ABSTRACT FROM AUTHOR]