Search

Management of production activities covers a wide range of decisions. In this paper, a modularised approach is suggested that, through configuration, generates a case-specific flow design. The approach is based on identification of decision categories that are generic and fundamental in the flow design, covering both discrete manufacturing industries and process industries. Each decision category identifies a unique property of the flow which changes at a particular point: this is termed a decoupling point. A three-dimensional modularised typology is developed by combining three different decision categories. Cases from the steel industry and the tooling industry are used to illustrate how the typology can be applied. The modularised approach provides a typology for the application of both qualitative and quantitative methods for flow management, including planning, control and performance management., Funding Agencies|Swedish Foundation for Strategic Research [PIC-LI]; Process Industrial IT and Automation (PiiA) - VINNOVA; Swedish Energy Agency, Formas; Swedish industry [2014-05110]

Management of production activities covers a wide range of decisions. In this paper, a modularised approach is suggested that, through configuration, generates a case-specific flow design. The approach is based on identification of decision categories that are generic and fundamental in the flow design, covering both discrete manufacturing industries and process industries. Each decision category identifies a unique property of the flow which changes at a particular point: this is termed a decoupling point. A three-dimensional modularised typology is developed by combining three different decision categories. Cases from the steel industry and the tooling industry are used to illustrate how the typology can be applied. The modularised approach provides a typology for the application of both qualitative and quantitative methods for flow management, including planning, control and performance management., Funding Agencies|Swedish Foundation for Strategic Research [PIC-LI]; Process Industrial IT and Automation (PiiA) - VINNOVA; Swedish Energy Agency, Formas; Swedish industry [2014-05110]

To improve road safety on parts of the road network carrying low traffic volumes, road designs are proposed including single-lane road segments and periodic overtaking lanes. These roads have been proven to contribute to substantial benefits in terms of road safety. However, overtaking of slower vehicles is only possible on segments including an overtaking lane and not on the single-lane road segments. Driver and vehicle heterogeneity resulting in differences in desired speeds are consequently decisive for the traffic performance. Sufficient quality of service is relying on an appropriate design and distribution of single-lane segments and overtaking lanes. In this paper, we study the effect of the desired speed distribution on traffic performance on single-lane road segments. Expressions are derived for the travel time, delay and percent time spent following. The derived expressions link the desired speed distribution, the single-lane segment length and the traffic flow to the resulting traffic performance. The results are verified through comparison with measures based on microscopic traffic simulation. The conclusion is that there is a good agreement between derived measures and simulation results. The derived measures should therefore not only be of theoretical interest, but also of practical use to estimate traffic performance on single-lane road segments.

To improve road safety on parts of the road network carrying low traffic volumes, road designs are proposed including single-lane road segments and periodic overtaking lanes. These roads have been proven to contribute to substantial benefits in terms of road safety. However, overtaking of slower vehicles is only possible on segments including an overtaking lane and not on the single-lane road segments. Driver and vehicle heterogeneity resulting in differences in desired speeds are consequently decisive for the traffic performance. Sufficient quality of service is relying on an appropriate design and distribution of single-lane segments and overtaking lanes. In this paper, we study the effect of the desired speed distribution on traffic performance on single-lane road segments. Expressions are derived for the travel time, delay and percent time spent following. The derived expressions link the desired speed distribution, the single-lane segment length and the traffic flow to the resulting traffic performance. The results are verified through comparison with measures based on microscopic traffic simulation. The conclusion is that there is a good agreement between derived measures and simulation results. The derived measures should therefore not only be of theoretical interest, but also of practical use to estimate traffic performance on single-lane road segments.

To improve road safety on parts of the road network carrying low traffic volumes, road designs are proposed including single-lane road segments and periodic overtaking lanes. These roads have been proven to contribute to substantial benefits in terms of road safety. However, overtaking of slower vehicles is only possible on segments including an overtaking lane and not on the single-lane road segments. Driver and vehicle heterogeneity resulting in differences in desired speeds are consequently decisive for the traffic performance. Sufficient quality of service is relying on an appropriate design and distribution of single-lane segments and overtaking lanes. In this paper, we study the effect of the desired speed distribution on traffic performance on single-lane road segments. Expressions are derived for the travel time, delay and percent time spent following. The derived expressions link the desired speed distribution, the single-lane segment length and the traffic flow to the resulting traffic performance. The results are verified through comparison with measures based on microscopic traffic simulation. The conclusion is that there is a good agreement between derived measures and simulation results. The derived measures should therefore not only be of theoretical interest, but also of practical use to estimate traffic performance on single-lane road segments.

To improve road safety on parts of the road network carrying low traffic volumes, road designs are proposed including single-lane road segments and periodic overtaking lanes. These roads have been proven to contribute to substantial benefits in terms of road safety. However, overtaking of slower vehicles is only possible on segments including an overtaking lane and not on the single-lane road segments. Driver and vehicle heterogeneity resulting in differences in desired speeds are consequently decisive for the traffic performance. Sufficient quality of service is relying on an appropriate design and distribution of single-lane segments and overtaking lanes. In this paper, we study the effect of the desired speed distribution on traffic performance on single-lane road segments. Expressions are derived for the travel time, delay and percent time spent following. The derived expressions link the desired speed distribution, the single-lane segment length and the traffic flow to the resulting traffic performance. The results are verified through comparison with measures based on microscopic traffic simulation. The conclusion is that there is a good agreement between derived measures and simulation results. The derived measures should therefore not only be of theoretical interest, but also of practical use to estimate traffic performance on single-lane road segments.

To improve road safety on parts of the road network carrying low traffic volumes, road designs are proposed including single-lane road segments and periodic overtaking lanes. These roads have been proven to contribute to substantial benefits in terms of road safety. However, overtaking of slower vehicles is only possible on segments including an overtaking lane and not on the single-lane road segments. Driver and vehicle heterogeneity resulting in differences in desired speeds are consequently decisive for the traffic performance. Sufficient quality of service is relying on an appropriate design and distribution of single-lane segments and overtaking lanes. In this paper, we study the effect of the desired speed distribution on traffic performance on single-lane road segments. Expressions are derived for the travel time, delay and percent time spent following. The derived expressions link the desired speed distribution, the single-lane segment length and the traffic flow to the resulting traffic performance. The results are verified through comparison with measures based on microscopic traffic simulation. The conclusion is that there is a good agreement between derived measures and simulation results. The derived measures should therefore not only be of theoretical interest, but also of practical use to estimate traffic performance on single-lane road segments.