Search

This paper examines how knowledge properties of a manufacturing activity transfer in international manufacturing network impact performance during the transfer itself and after steady state has been reached. Hierarchical regression was used to test the relationship on survey data from 178 companies. Knowledge properties as a group was significantly affected by both performance measures when controlling for the effects of sender unit experience, sender unit size and receiver unit experience. The activities transferred thus impact the success of the transfer. The control variables of sender unit experience and receiver unit experience have their relatively strongest performance effects after steady state has been reached. Independency was the single knowledge property dimensions with the strongest relative performance effect. This is one of the first survey studies to cover both the performance of the transfer itself and after reaching steady state of manufacturing transfers. Several strands of further research were therefore identified.

This paper examines how knowledge properties of a manufacturing activity transfer in international manufacturing network impact performance during the transfer itself and after steady state has been reached. Hierarchical regression was used to test the relationship on survey data from 178 companies. Knowledge properties as a group was significantly affected by both performance measures when controlling for the effects of sender unit experience, sender unit size and receiver unit experience. The activities transferred thus impact the success of the transfer. The control variables of sender unit experience and receiver unit experience have their relatively strongest performance effects after steady state has been reached. Independency was the single knowledge property dimensions with the strongest relative performance effect. This is one of the first survey studies to cover both the performance of the transfer itself and after reaching steady state of manufacturing transfers. Several strands of further research were therefore identified.

This paper examines how knowledge properties of a manufacturing activity transfer in international manufacturing network impact performance during the transfer itself and after steady state has been reached. Hierarchical regression was used to test the relationship on survey data from 178 companies. Knowledge properties as a group was significantly affected by both performance measures when controlling for the effects of sender unit experience, sender unit size and receiver unit experience. The activities transferred thus impact the success of the transfer. The control variables of sender unit experience and receiver unit experience have their relatively strongest performance effects after steady state has been reached. Independency was the single knowledge property dimensions with the strongest relative performance effect. This is one of the first survey studies to cover both the performance of the transfer itself and after reaching steady state of manufacturing transfers. Several strands of further research were therefore identified.

This paper examines how knowledge properties of a manufacturing activity transfer in international manufacturing network impact performance during the transfer itself and after steady state has been reached. Hierarchical regression was used to test the relationship on survey data from 178 companies. Knowledge properties as a group was significantly affected by both performance measures when controlling for the effects of sender unit experience, sender unit size and receiver unit experience. The activities transferred thus impact the success of the transfer. The control variables of sender unit experience and receiver unit experience have their relatively strongest performance effects after steady state has been reached. Independency was the single knowledge property dimensions with the strongest relative performance effect. This is one of the first survey studies to cover both the performance of the transfer itself and after reaching steady state of manufacturing transfers. Several strands of further research were therefore identified.

This paper examines how knowledge properties of a manufacturing activity transfer in international manufacturing network impact performance during the transfer itself and after steady state has been reached. Hierarchical regression was used to test the relationship on survey data from 178 companies. Knowledge properties as a group was significantly affected by both performance measures when controlling for the effects of sender unit experience, sender unit size and receiver unit experience. The activities transferred thus impact the success of the transfer. The control variables of sender unit experience and receiver unit experience have their relatively strongest performance effects after steady state has been reached. Independency was the single knowledge property dimensions with the strongest relative performance effect. This is one of the first survey studies to cover both the performance of the transfer itself and after reaching steady state of manufacturing transfers. Several strands of further research were therefore identified.

This paper examines how knowledge properties of a manufacturing activity transfer in international manufacturing network impact performance during the transfer itself and after steady state has been reached. Hierarchical regression was used to test the relationship on survey data from 178 companies. Knowledge properties as a group was significantly affected by both performance measures when controlling for the effects of sender unit experience, sender unit size and receiver unit experience. The activities transferred thus impact the success of the transfer. The control variables of sender unit experience and receiver unit experience have their relatively strongest performance effects after steady state has been reached. Independency was the single knowledge property dimensions with the strongest relative performance effect. This is one of the first survey studies to cover both the performance of the transfer itself and after reaching steady state of manufacturing transfers. Several strands of further research were therefore identified.

Waste management in the Architecture, Engineering and Construction (AEC) industry has been a major research topic owing to the AEC industry being one of the top contributors of waste generation. However, research has primarily focused on new build and has neglected refurbishment projects which become relevant due to an aging building stock in Sweden and Europe. Various actors are involved in refurbishment projects which makes it important to study each actor as well as tensions between them. By using a service ecosystem perspective and relying on 38 interviews, this paper aims to investigate tensions and barriers between actors within the service ecosystem of CDW for refurbishment projects in Sweden. Based on the results, spatial barriers are the most mentioned barrier which also create the highest number of tensions between project and contractor mother firm, subcontractors, waste recycling firms and society/citizens. The majority of the tensions are found between projects and the contractor mother firms, followed by tensions between projects and clients and projects and subcontractors. Unlike previous studies investigating only one of the actors waste management practices, this paper contributes by investigating the interactions between seven different actors which is important for improving waste management practices in refurbishment projects., Funding Agencies|Mistra Closing the Loop, the Foundation for Strategic Environmental Research [160026]

Waste management in the Architecture, Engineering and Construction (AEC) industry has been a major research topic owing to the AEC industry being one of the top contributors of waste generation. However, research has primarily focused on new build and has neglected refurbishment projects which become relevant due to an aging building stock in Sweden and Europe. Various actors are involved in refurbishment projects which makes it important to study each actor as well as tensions between them. By using a service ecosystem perspective and relying on 38 interviews, this paper aims to investigate tensions and barriers between actors within the service ecosystem of CDW for refurbishment projects in Sweden. Based on the results, spatial barriers are the most mentioned barrier which also create the highest number of tensions between project and contractor mother firm, subcontractors, waste recycling firms and society/citizens. The majority of the tensions are found between projects and the contractor mother firms, followed by tensions between projects and clients and projects and subcontractors. Unlike previous studies investigating only one of the actors waste management practices, this paper contributes by investigating the interactions between seven different actors which is important for improving waste management practices in refurbishment projects., Funding Agencies|Mistra Closing the Loop, the Foundation for Strategic Environmental Research [160026]

Waste management in the Architecture, Engineering and Construction (AEC) industry has been a major research topic owing to the AEC industry being one of the top contributors of waste generation. However, research has primarily focused on new build and has neglected refurbishment projects which become relevant due to an aging building stock in Sweden and Europe. Various actors are involved in refurbishment projects which makes it important to study each actor as well as tensions between them. By using a service ecosystem perspective and relying on 38 interviews, this paper aims to investigate tensions and barriers between actors within the service ecosystem of CDW for refurbishment projects in Sweden. Based on the results, spatial barriers are the most mentioned barrier which also create the highest number of tensions between project and contractor mother firm, subcontractors, waste recycling firms and society/citizens. The majority of the tensions are found between projects and the contractor mother firms, followed by tensions between projects and clients and projects and subcontractors. Unlike previous studies investigating only one of the actors waste management practices, this paper contributes by investigating the interactions between seven different actors which is important for improving waste management practices in refurbishment projects., Funding Agencies|Mistra Closing the Loop, the Foundation for Strategic Environmental Research [160026]

Waste management in the Architecture, Engineering and Construction (AEC) industry has been a major research topic owing to the AEC industry being one of the top contributors of waste generation. However, research has primarily focused on new build and has neglected refurbishment projects which become relevant due to an aging building stock in Sweden and Europe. Various actors are involved in refurbishment projects which makes it important to study each actor as well as tensions between them. By using a service ecosystem perspective and relying on 38 interviews, this paper aims to investigate tensions and barriers between actors within the service ecosystem of CDW for refurbishment projects in Sweden. Based on the results, spatial barriers are the most mentioned barrier which also create the highest number of tensions between project and contractor mother firm, subcontractors, waste recycling firms and society/citizens. The majority of the tensions are found between projects and the contractor mother firms, followed by tensions between projects and clients and projects and subcontractors. Unlike previous studies investigating only one of the actors waste management practices, this paper contributes by investigating the interactions between seven different actors which is important for improving waste management practices in refurbishment projects., Funding Agencies|Mistra Closing the Loop, the Foundation for Strategic Environmental Research [160026]

Waste management in the Architecture, Engineering and Construction (AEC) industry has been a major research topic owing to the AEC industry being one of the top contributors of waste generation. However, research has primarily focused on new build and has neglected refurbishment projects which become relevant due to an aging building stock in Sweden and Europe. Various actors are involved in refurbishment projects which makes it important to study each actor as well as tensions between them. By using a service ecosystem perspective and relying on 38 interviews, this paper aims to investigate tensions and barriers between actors within the service ecosystem of CDW for refurbishment projects in Sweden. Based on the results, spatial barriers are the most mentioned barrier which also create the highest number of tensions between project and contractor mother firm, subcontractors, waste recycling firms and society/citizens. The majority of the tensions are found between projects and the contractor mother firms, followed by tensions between projects and clients and projects and subcontractors. Unlike previous studies investigating only one of the actors waste management practices, this paper contributes by investigating the interactions between seven different actors which is important for improving waste management practices in refurbishment projects., Funding Agencies|Mistra Closing the Loop, the Foundation for Strategic Environmental Research [160026]

Increased demand for actionable knowledge in operations- and supply chain management has fuelled the interest in collaborative, action-oriented research design as well as modes of theorising that generate adaptable and actionable frameworks. Whilst action research (AR) design as well as middle-range theories (MRT) offer guiding principles herein, they are researcher centric in nature. It is taken for granted that practitioners that enter such an endeavour have a certain level of knowledge or experience prior to the initial stages of formalising the research problem. Practitioners in non-academic, operations management-intensive industries or craftsmanship-based industries, such as construction or carpeting (often in the SME range) are often neither prepared nor equipped with the principles necessary to convey their managerial challenges into collaborative research design. This risk limiting or even hindering altogether such participation. This paper elaborates on combining the logic of AR and MRT. By conceptualising a preparatory phase for initiating practitioner engagement, complementing the conventional AR cycle, a four-step approach is presented: (1) Identifying a joint interest; (2) Teaching - Awakening interest in the topic through MRT frameworks; (3) Accepting buy-in to the AR cycle and determining the problem; and (4) Proposing MRT frameworks for analysis and entering the traditional AR cycle.