Search

Purpose: Gastrointestinal disorders frequently necessitate surgery involving intestinal resection and anastomosis formation, potentially leading to severe complications like anastomotic leakage (AL) which is associated with increased morbidity, mortality, and adverse oncologic outcomes. While extensive research has explored the biology of anastomotic healing, there is limited understanding of the biomechanical properties of gastrointestinal anastomoses, which was aimed to be unraveled in this study., Methods: An ex-vivo model was developed for the biomechanical analysis of 32 handsewn porcine end-to-end anastomoses, using interrupted and continuous suture techniques subjected to different flow models. While multiple cameras captured different angles of the anastomosis, comprehensive data recording of pressure, time, and temperature was performed simultaneously. Special focus was laid on monitoring time, location and pressure of anastomotic leakage (LP) and bursting pressures (BP) depending on suture techniques and flow models., Results: Significant differences in LP, BP, and time intervals were observed based on the flow model but not on the suture techniques applied. Interestingly, anastomoses at the insertion site of the mesentery exhibited significantly higher rates of leakage and bursting compared to other sections of the anastomosis., Conclusion: The developed ex-vivo model facilitated comparable, reproducible, and user-independent biomechanical analyses. Assessing biomechanical properties of anastomoses offers an advantage in identifying technical weak points to refine surgical techniques, potentially reducing complications like AL. The results indicate that mesenteric insertion serves as a potential weak spot for AL, warranting further investigations and refinements in surgical techniques to optimize outcomes in this critical area of anastomotic procedures., (© 2024. The Author(s).)

Gluteal insufficiency or hip abductor mechanism deficiency mainly following (revision) total hip replacement is associated with highly painful complaints and severe suffering of patients. It represents a great diagnostic and therapeutic challenge. Differentiated conservative treatment pathways, open surgical and endoscopic anatomic repair techniques with intact gluteal musculature and muscle transfer are available as salvage procedures for chronic not anatomically reconstructable mass ruptures. A stepwise diagnostic and therapeutic approach is required for restoration of the quality of life and painless or almost painless mobility of affected patients in occupation and daily life.

Antibacterial coating of medical devices is a promising approach to reduce the risk of infection but has not yet been achieved on wear surfaces, e.g. polyethylene (PE). We quantitatively determined the antimicrobial potency of different PE surfaces, which had been conversed to diamond-like carbon (DLC-PE) and doped with silver ions (Ag-DLC-PE). Bacterial adhesion and planktonic growth of various strains of S. epidermidis on Ag-DLC-PE were compared to untreated PE by quantification of colony forming units on the adherent surface and in the growth medium as well as semiquantitatively by determining the grade of biofilm formation by scanning electron microscopy. (1) A significant (p < 0.05) antimicrobial effect could be found for Ag-DLC-PE. (2) The antimicrobial effect was positively correlated with the applied fluences of Ag (fivefold reduced bacterial surface growth and fourfold reduced bacterial concentration in the surrounding medium with fluences of 1 × 10(17) vs. 1 × 10(16) cm(-2) under implantation energy of 10 keV). (3) A low depth of Ag penetration using low ion energies (10 or 20 vs. 100 keV) led to evident antimicrobial effects (fourfold reduced bacterial surface growth and twofold reduced bacterial concentration in the surrounding medium with 10 or 20 keV and 1 × 10(17) cm(-2) vs. no reduction of growth with 100 keV and 1 × 10(17) cm(-2)). (4) Biofilm formation was decreased by Ag-DLC-PE surfaces. The results obtained in this study suggest that PE-surfaces can be equipped with antibacterial effects and may provide a promising platform to finally add antibacterial coatings on wear surfaces of joint prostheses.

Silver ions (Ag(+)) have strong bactericidal effects and Ag-coated medical devices proved their effectiveness in reducing infections in revision total joint arthroplasty. We quantitatively determined the antimicrobial potency of different surface treatments on a titanium alloy (Ti), which had been conversed to diamond-like carbon (DLC-Ti) and doped with high (Ag:PVP = 1:2) and low (Ag:PVP = 1:10 and 1:20) concentrations of Ag (Ag-DLC-Ti) with a modified technique of ion implantation. Bacterial adhesion and planktonic growth of clinically relevant bacterial strains (Staphylococcus epidermidis, Staphylococcus aureus, and Pseudomonas aeruginosa) on Ag-DLC-Ti were compared to untreated Ti by quantification of colony forming units on the adherent surface and in the growth medium as well as semiquantitatively by determining the grade of biofilm formation by scanning electron microscopy. (1) A significant (p < 0.05) antimicrobial effect could be found for all Ag-DLC-Ti samples (reduced growth by 5.6-2.5 logarithmic levels). (2) The antimicrobial effect was depending on the tested bacterial strain (most for P. aeruginosa, least for S. aureus). (3) Antimicrobial potency was positively correlated with Ag concentrations. (4) Biofilm formation was decreased by Ag-DLC-Ti surfaces. This study revealed potent antibacterial effects of Ag-DLC-Ti. This may serve as a promising novel approach to close the gap in antimicrobial protection of musculoskeletal implants.

Background: Data on implant allergies are incomplete; therefore, we compared the data on allergy history, patch test (PT) and lymphocyte transformation test (LTT) results in a patient series from the Munich implant allergy outpatient department with symptom-free arthroplasty patients., Patients and Methods: In this study 200 arthroplasty patients with complaints involving the prosthesis (130 female, 187 knee and 13 hip prostheses) and in parallel 100 symptom-free patients (75 female, 47 knee and 53 hip prostheses) were investigated. A questionnaire-aided history including implant type, cementing, intolerance of dental materials, atopy, cutaneous metal intolerance (CMI) and PT, including a standard series with Ni, Co, Cr, seven bone cement components, including gentamicin and benzoyl peroxide and LTT for Ni, Co and Cr., Results: In the knee arthroplasty patients with complaints 9.1% showed dental material intolerance, 23.5% atopy, 25.7% CMI, 18.2% metal allergies, 7.4% gentamicin allergy and 27.8% positive metal LTT (mostly to Ni). In symptom-free patients 0% showed dental material intolerance, 19.1% atopy, 12.8% CMI, 12.8% metal allergy, 0% gentamicin allergy and 17% positive metal LTT., Conclusions: Characteristics of the patients with complaints were increased intolerance of dental materials, higher rates of atopy, CMI, metal and gentamicin allergy and LTT reactivity.

Background: The limited regeneration capacity of hyaline articular cartilage requires detailed studies concerning the tissue integration of cartilage transplants with meaningful but time and/or resource-consuming and in part ethically problematic animal models or, alternatively, with in vitro test systems for implant materials., Material and Methods: The present study describes a regeneration model with bovine cartilage rings (outer Ø 6 mm, central defect Ø 2 mm) for insertion, cultivation and biomechanical or histological testing of cartilage replacement materials (HE and safranin O staining). In this study, resorbable polymers composed of polyglycolic acid (PGA) were analyzed., Results: Biomechanical testing showed a continuous decrease of the push-out force for the PGA inserts from the cartilage rings, probably due to the resorbability of the material. Histologically, clear immigration of cells into cell-free PGA was observed even after 4 weeks of culture, but in particular after 10 weeks. In addition, storage of proteoglycans was interpreted as an initial sign of the formation of new matrix., Conclusion: Thus, the new regeneration model is in principle suitable for the testing of biomaterials, but shows limitations in assessing the "lateral bonding" of resorbable materials.

Articular cartilage repair methods, in particular scaffold-based autologous chondrocyte implantation, are already in clinical use. In the coming years, the European guidelines on human cell-based medicinal products by the European Medical Agency (EMA) will extend today's quality control mechanisms by additional structural analyses. As articular cartilage has complex biphasic and viscoelastic mechanical properties, a high-performance material test system is required and has already been implemented. To characterize the recovery of cartilage and cartilage replacement materials, it is necessary to measure the dynamic recovery profile. A measurement system for an application like this requires an axis acceleration of more then 50 m/s(2). Furthermore, the test system needs custom-made components to fix the biological specimen while testing. A software package consisting of a graphical user interface and an axis controller leads to highly reproducible tests. The software makes use of a position and velocity controller as well as a force controller at kilohertz speed. While using the high performance force controller it is possible to apply static and dynamic loading profiles that are independent from position or speed set points and signals.

Due to advances in total joint replacement, intertrochanteric osteotomy (ITO) is performed more infrequently in spite of good clinical results. Nevertheless, there are several good indications for this joint-preserving procedure in adults. Detailed biomechanical knowledge and precise clinical examination are prerequisites for correct indications and planning of ITO. The main target of this surgical procedure is improvement of joint congruency and normalization of load transfer to protect damaged cartilage. Very good results can be obtained in hip dysplasia, non-union of the femoral neck and proximal femoral deformities if the therapeutic principles are followed. Higher failure rates have to be expected in femoral head necrosis and osteoarthritis, depending on the degree of pre-existing cartilage damage.

Background: The plate-screw interface of an angular stable plate osteosynthesis is very rigid. So far, all attempts to decrease the stiffness of locked plating construct, e.g. the bridged plate technique, decrease primarily the bending stiffness. Thus, the interfragmentary motion increases only on the far cortical side by bending the plate. To solve this problem, the dynamic locking screw (DLS) was developed., Materials and Methods: Comparison tests were performed with locking screws (LS) and DLS. Axial stiffness, bending stiffness and interfragmentary motion were compared. For measurements, we used a simplified transverse fracture model, consisting of POM C and an 11-hole LCP3.5 with a fracture gap of 3 mm. Three-dimensional fracture motion was detected using an optical measurement device (PONTOS 5 M/GOM) consisting of two CCD cameras (2,448 x 2,048 pixel) observing passive markers., Results: The DLS reduced the axial stiffness by approximately 16% while increasing the interfragmentary motion at the near cortical side significantly from 282 microm (LS) to 423 microm (DLS) applying an axial load of 150 N., Conclusion: The use of DLS reduces the stiffness of the plate-screw interface and thus increases the interfragmentary motion at the near cortical side without altering the advantages of angular stability and the strength.