Search

α-Amanitin is often considered the most poisonous mushroom toxin produced by various mushroom species, which are hard to identify from edible, non-toxic mushrooms. Conventional detection methods require expensive and bulky equipment or fail to meet high analytical sensitivity. We developed a smartphone-based fluorescence microscope platform to detect α-amanitin from dry mushroom tissues. Antibody-nanoparticle conjugates were captured by immobilized antigen-hapten conjugates while competing with the free analytes in the sample. Captured fluorescent nanoparticles were excited at 460 nm and imaged at 500 nm. The pixel numbers of such nanoparticles in the test zone were counted, showing a decreasing trend with increasing analyte concentration. The detection method exhibited a low detection limit (1 pg/mL), high specificity, and selectivity, allowing us to utilize a simple rinsing for toxin extraction and avoiding the need for high-speed centrifugation. In addition, this assay's short response time and portable features enable field detection of α-amanitin from amanitin-producing mushrooms., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Spatial orientation is based on a complex cortical network with input from multiple sensory systems. It is affected by training, sex and age as well as cultural and psychological factors, resulting in different individual skill levels in healthy subjects. Various neurological disorders can lead to different patterns or specific deficits of spatial orientation and navigation. Accordingly, numerous tests have been proposed to assess these abilities. Here, we compare the results of (1) a validated questionnaire-based self-estimate of orientation/navigation ability (Santa Barbara Sense of Direction Scale, SBSODS) and (2) a validated pen-and-paper two-dimensional perspective test (Perspective Taking Spatial Orientation Test, SOT) with (3) a newly developed test of finger-arm pointing performance in a 3D real-world (3D-RWPT) paradigm using a recently established pointing device. A heterogeneous group of 121 participants (mean age 56.5 ± 17.7 years, 52 females), including 16 healthy volunteers and 105 patients with different vestibular, ocular motor and degenerative brain disorders, was included in this study. A high correlation was found between 2D perspective task and 3D pointing along the horizontal (azimuth) but not along the vertical (polar) plane. Self-estimated navigation ability (SBSODS) could not reliably predict actual performance in either 2D- or 3D-tests. Clinical assessment of spatial orientation and memory should therefore include measurements of actual performance, based on a 2D pen-and-paper test or a 3D pointing task, rather than memory-based questionnaires, since solely relying on the patient's history of self-estimated navigation ability results in misjudgments. The 3D finger-arm pointing test (3D-RWPT) reveals additional information on vertical (polar) spatial performance which goes undetected in conventional 2D pen-and-paper tests. Diseases or age-specific changes of spatial orientation in the vertical plane should not be clinically neglected. The major aim of this pilot study was to compare the practicability and capability of the three tests but not yet to prove their use for differential diagnosis. The next step will be to establish a suitable clinical bedside test for spatial memory and orientation., (© 2022. The Author(s).)

Laser-induced graphene (LIG) is as a promising material for flexible microsupercapacitors (MSCs) due to its simple and cost-effective processing. However, LIG-MSC research and production has been centered on non-sustainable polymeric substrates, such as polyimide. In this work, it is presented a cost-effective, reproducible, and robust approach for the preparation of LIG structures via a one-step laser direct writing on chromatography paper. The developed strategy relies on soaking the paper in a 0.1 M sodium tetraborate solution (borax) prior to the laser processing. Borax acts as a fire-retardant agent, thus allowing the laser processing of sensitive substrates that other way would be easily destroyed under the high-energy beam. LIG on paper exhibiting low sheet resistance (30 Ω sq -1 ) and improved electrode/electrolyte interface was obtained by the proposed method. When used as microsupercapacitor electrodes, this laser-induced graphene resulted in specific capacitances of 4.6 mF cm -2 (0.015 mA cm -2 ). Furthermore, the devices exhibit excellent cycling stability (> 10,000 cycles at 0.5 mA cm -2 ) and good mechanical properties. By connecting the devices in series and parallel, it was also possible to control the voltage and energy delivered by the system. Thus, paper-based LIG-MSC can be used as energy storage devices for flexible, low-cost, and portable electronics. Additionally, due to their flexible design and architecture, they can be easily adapted to other circuits and applications with different power requirements., (© 2022. The Author(s).)

A novel hydrophilic As(V) ion-imprinted cryogel (IIC) was green prepared by cryogelation in aqueous environment which was coincident with the adsorption condition and can improve the specific recognition performance. The methacrylamido propyl trimethyl ammonium chloride (MPTAC) was selected as the functional monomer and the saturated adsorption capacity of the prepared IIC and NIC were 55.0 mg/g and 29.4 mg/g, and with high imprinting factor of 1.87. Additionally, the prepared IIC showed admirable reusability and high selectivity, and the recovery was in the range 81.2-97.9% with RSD range of 1.9-4.3%, which was similar to the value obtained by hydride generation atomic absorption spectrometry. IIC can be used as solid material for colorimetric detection at the ultraviolet wavelength of 858 nm without color interference of material matrix, in the range 5-200 μg/L (R 2  = 0.990) with a detection limit of 0.970 µg/L. Obviously, this synthetic strategy provides a simple, efficient, and green method for the preparation of water-compatible ion-imprinted polymers providing selective separation and detection of trace As(V) in real complex samples., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Nowadays, in the clinical, pharmaceutical, and environmental sectors, the development of facile and sensitive analytical methods and/or innovative devices for the follow-up and detection of antibiotics and pharmaceutical formulations, in general, are urgently needed and still challenging. This work declared three vital applications for broad-spectrum nitrofurantoin (macrofuran) antibiotic detection and quantification: A colorimetric method, a coated paper strip-based nano-lanthanum complex prototype and fabrication of smart electronic color sensor device-based coated paper strips. The colorimetric method showed a significant response upon increasing the concentration of the nitrofurantoin in a range between (1.0-100.0 ng/mL) via a visual color change from orange-yellow to red colors degree with detection and quantification limits of 0.175 and 0.53 ng/mL, respectively, whereas the nano-lanthanum complex coated paper strip prototype showed qualitative on-site sensing for nitrofurantoin via naked eye color changes which can be detected anywhere. Moreover, a smart prototype for detecting macrofuran in the means of paper color change in the RGB color component extraction algorithm and the grayscale projection value processing algorithm was fabricated. The change in RGB color on the coated paper strip was detected using an electronic color sensor device. The developed colorimetric method, coated paper strip, and the electronic color sensor device prototype exhibited fast, simple, costless, and selective towards macrofuran over the competing analyzed. As well as, showed good applicability in the different real samples spiked with different concentrations of macrofuran., (© 2022. The Author(s).)

A disposable electrochemical lateral flow paper-based sensing device for heavy metal detection is proposed. The quantification of lead and cadmium in aqueous samples is demonstrated in a range from 10 to 100 ppb with a limit of detection of 7 and 11 ppb respectively. Moreover, the platform itself, which is made of paper, served as a sample pretreatment material due to its filtering properties. Real samples, especially in which the matrix is usually turbid and would in principle need a previous filtration, are successfully analyzed. This lab-on-paper device is simple, low cost, easy to fabricate, and portable, being a promising tool for new point-of-care applications in environmental monitoring, public health, and food safety.

In this report, we present a paper membrane-based surface-enhanced Raman scattering (SERS) platform for the determination of blood glucose level using a nitrocellulose membrane as substrate paper, and the microfluidic channel was simply constructed by wax-printing method. The rod-shaped gold nanorod particles were modified with 4-mercaptophenylboronic acid (4-MBA) and 1-decanethiol (1-DT) molecules and used as embedded SERS probe for paper-based microfluidics. The SERS measurement area was simply constructed by dropping gold nanoparticles on nitrocellulose membrane, and the blood sample was dropped on the membrane hydrophilic channel. While the blood cells and proteins were held on nitrocellulose membrane, glucose molecules were moved through the channel toward the SERS measurement area. Scanning electron microscopy (SEM) was used to confirm the effective separation of blood matrix, and total analysis is completed in 5 min. In SERS measurements, the intensity of the band at 1070 cm(-1) which is attributed to B-OH vibration decreased depending on the rise in glucose concentration in the blood sample. The glucose concentration was found to be 5.43 ± 0.51 mM in the reference blood sample by using a calibration equation, and the certified value for glucose was 6.17 ± 0.11 mM. The recovery of the glucose in the reference blood sample was about 88 %. According to these results, the developed paper-based microfluidic SERS platform has been found to be suitable for use for the detection of glucose in blood samples without any pretreatment procedure. We believe that paper-based microfluidic systems may provide a wide field of usage for paper-based applications.

A rapid and low-cost method of diagnosis is becoming important for detecting fetal inherited diseases, including single-gene disorders and chromosomal abnormalities. Here, we demonstrated an innovation that use paper-dried cord blood (PCB) as the starting material for PCR and whole genome amplification without any DNA extraction step at a very low cost. A novel PCR buffer named "DDB buffer" containing ammonium sulfate and glycerol were used instead of the conventional 10× PCR buffer. The amplicons were directly analyzed through microchip electrophoresis and whole genome sequencing. Inhibitory substances in filter paper were effectively inactivated using DDB buffer. Direct PCR amplification of DNA fragments ranging from 100 to 900 bp using filter paper spotted with 0.5 to 5 μL of cord blood and various anticoagulants was successful. We were able to determine fetal single-gene disorders and chromosomal diseases in all 46 chromosomes using PCB samples successfully. Compared with prenatal diagnosis using purified DNA, the proposed method is simple, fast, less prone to cross-contamination at minimal cost. Researchers and clinical and healthcare workers may employ this method for genetic diagnosis using cord blood samples with minimum laboratory resources. This method is very promising for a variety of genetic diagnosis applications in underserved communities at the point of need in developing areas. Graphical abstract.

Microfluidic paper-based devices (μPADs) and wearable devices have been highly studied to be used as diagnostic tools due to their advantages such as simplicity and ability to provide instrument-free fast results. Diseases such as periodontitis and diabetes mellitus can potentially be detected through these devices by the detection of important biomarkers. This study describes the development of μPADs through craft cutter printing for glucose and nitrite salivary diagnostics. In addition, the use of μPADs integrated into a mouthguard as a wearable sensor for glucose monitoring is also presented. μPADs were designed to contain two detection zones for glucose and nitrite assays and a sampling zone interconnected by microfluidic channels. Initially, the analytical performance of the proposed μPADs was investigated and it provided linear behavior (r 2  ≥ 0.994) in the concentration ranges between 0 to 2.0 mmol L -1 and 0 to 400 μmol L -1 for glucose and nitrite, respectively. Under the optimized conditions, the limits of detection achieved for glucose and nitrite were 27 μmol L -1 and 7 μmol L -1 , respectively. Human saliva samples were collected from healthy individuals and patients previously diagnosed with periodontitis or diabetes and then analyzed on the proposed μPADs. The results found using μPADs revealed higher glucose concentration values in saliva collected from patients diagnosed with diabetes mellitus and greater nitrite concentrations in saliva collected from patients diagnosed with periodontitis, as expected. The results obtained on μPADs did not differ statistically from those measured by spectrophotometry. With the aim of developing paper-based wearable sensors, μPADs were integrated, for the first time, into a silicone mouthguard using a 3D-printed holder. The proof of concept was successfully demonstrated through the monitoring of the glucose concentration in saliva after the ingestion of chocolate. According to the results reported herein, paper-based microfluidic devices offer great potential for salivary diagnostics, making their integration into a silicone mouthguard possible, generating simple, low-cost, instrument-free, and powerful wearable sensors.

A paper-based electrochemical sensor is described that is based on the use of thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC-SH) that was self-assembled on a gold nanoparticle-modified screen-printed electrode (SPE). The SPE sensor was used for label-free detection of C-reactive protein (CRP). Gold nanoparticles (AuNPs) were first electrodeposited on the SPCE, followed by the self-assembly of PMPC-SH on gold. The electrochemical response of the modified SPE to CRP was measured by differential pulse voltammetry (DPV). If the CRP on the paper device is contacted with Ca (II) ions, the current (measured by using hexacyanoferrate as the electrochemical probe) decreases. The signal drops in the 5 to 5000 ng·mL -1 CRP concentration range, and the lower detection limit (at 3 SD/slope) is 1.6 ng·mL -1 . The use of a PMPC-modified surface also reduces the nonspecific adsorption of proteins. The sensor is not interfered by bilirubin, myoglobin and albumin. It was successfully applied to CRP detection in certified human serum. This sensor is applicable as an attractive protocol for an inexpensive, highly sensitive, and disposable material for electrochemical detection of CRP. Graphical abstract Schematic presentation of highly sensitive and disposable paper-based electrochemical sensor using thiol-terminated poly(2-methacryloyloxyethyl phosphorylcholine) in the presence of Ca 2+ for the label-free C-reactive protein detection. The current was measured by differential pulse voltammetry.

Ligand fishing is a widely used approach for screening active compounds from natural products. Recently, cell membrane (CM) as affinity ligand has been applied in ligand fishing, including cell membrane chromatography (CMC) and CM-coated magnetic bead. However, these methods possess many weaknesses, including complicated preparation processes and time-consuming operation. In this study, cheap and easily available cellulose filter paper (CFP) was selected as carrier of CM and used to fabricate a novel CM-coated CFP (CMCFP) for the first time. The type of CFP was optimized according to the amount of immobilized protein, and the immobilization of CM onto CFP by the insertion and self-fusion process was verified by confocal imaging. The CMCFP exhibited good selectivity and stability and was used for fishing potentially active compounds from extracts of Angelica dahurica. Three potentially active compounds, including bergapten, pabulenol, and imperatorin, were fished out and identified. The traditional Chinese medicine systems pharmacology database and analysis platform was used to build an active compound-target protein network, and accordingly, the gamma-aminobutyric acid receptor subunit alpha-1 (GABRA1) was deduced as potential target of CM for the active compounds of Angelica dahurica. Molecular docking was performed to evaluate the interaction between active compounds and GABRA1, and bergapten was speculated as a new potentially active compound. Compared with other methods, the fishing assay based on CMCFP was more effective, simpler, and cheaper.