Search

This study aims to explore the channel patterns and the characteristic parameters of the zigzag microchannel based on microfluidic paper-based analytical devices (μPADs), in which the mixing efficiency and speed can be greatly enhanced. Better mixing of the solutions was obtained by adding a simple directing electric field to the optimized structure of the zigzag microchannel on paper-based chips instead of the traditional complex devices. A higher mixing efficiency was reached when the direct-current (DC) power supply reached 20 V. Meanwhile, a piezoelectric transducer (PZT) driver was used in the mixing experiment with the paper-based zigzag microchannel. The results show that the mixing efficiency reached a maximum value when the input voltage and frequency were 30 V and 150 Hz, respectively. These paper-based devices meet the requirements of the biochemical analysis field because they are low cost, easy to operate, and have high efficiencies, giving them good prospects for future applications. Graphical Abstract.

Advancements in health care monitoring demand a rapid, accurate and reliable early diagnosis of "Heart Attack" (acute myocardial infarction) with an objective to develop a cost-effective, rapid and label-free point of care diagnostic test kit for the detection of cardiac troponin I (cTnI) on paper-based multi-frequency impedimetric transducers. Paper based sensing platforms were developed by integrating carboxyl group functionalized multi-walled carbon nanotubes (MWCNT) with antibodies of cardiac troponin I (anti-cTnI) biomarker and was characterized using Electrochemical Impedance Spectroscopy (EIS). Various concentrations of cTnI with anti cTnI were studied as a function of impedance change. The suitability of the proposed immunosensor is demonstrated by spiking cTnI in blood serum samples. The limit of detection (LoD) and sensitivity of the proposed sensor was determined to be 0.05 ng/mL and 1.85 mΩ/ng/mL respectively, with a response time of ~1 min. The shelf life of the fabricated sensor was nearly 30 days. The rapid response, very low detection limit, and cost effectiveness offer a portable platform to detect cTnI in blood serum samples. The proposed immunosensor, therefore, offers an affordable healthcare diagnostic platform in resource limited areas.

Cystinuria, is an autosomal recessive genetic disorder involving increasingly high levels of poorly soluble cysteine in urine leading to formation of stones. Developing a facile, low-cost, point-of-care and selective sensor for diagnosis of cysteine is imperative. Accordingly, for the detection of cysteine, the present study demonstrates an inexpensive colorimetric, paper-based vertical flow plasmonic micro-well device with a two-minute turn-around time. The method encompasses the use of microbially-synthesized silver nanoparticles (AgNPs) that change from light brown / yellow to dark brown upon binding with Sulphur present in cysteine. This technique allows for visual detection up to 1 × 10 -5  mM cysteine and can be easily offered as a rapid diagnostic test even at setups with minimal resources.

This article introduces a novel inkjet printing method for the fabrication of a microfluidic paper-based analytical device (μPADs) with improved analytical performance for colorimetric measurements. Firstly, a hydrophobic boundary was created by wax printing on chromatography paper. Then, chitosan (CHI), 3,3',5,5'-Tetramethylbenzidine (TMB) and enzymatic mixture solvent (glucose oxidase (GOx) and horseradish peroxidase (HRP)) were sequentially printed in the sensing zone. Polyethylene glycol (PEG6000) was mixed with the bienzymatic solution to act as an enzyme stabilizer, forming the printable ink. The resulting μPADs exhibited a linear relationship between color intensity and glucose concentration from 0.0 25 mg/ml to 0 .5mg/ml. The detectable glucose concentration was in a clinically relevant range from 0.01 mg/ml to 4 mg/ml. The limit of detection (LOD) was achieved at 0.01 mg/ml. After 60-day storage under 4 °C, the color intensity at the testing zone retained over 80% of the original intensity. In addition, a smartphone application was developed for in situ colorimetric image processing, and the colorimetric analysis results were compared with those from the use of a scanner followed by processing using ImageJ. Furthermore, the development of this ink printing method also provides a point of care (POC) platform for other substances detection purposes.