Search

The dissolution behaviors of various minerals in the tellurium–bismuth ore during oxidic–acidic leaching were investigated systematically in this work. The Te–Bi phase in the ore distributes in network shape, triangular shape, tree shape, strip shape, bulk shape, sparse granule, flake shape, crescent, etc., which are closely intercalated with FeS, FeS2, and CaCO3·(Mg,Fe,Mn)CO3. Under suitable conditions, 95.61% Te and 95.77% Bi can be recovered. Within 20 min of the initial leaching, most of dolomite and Te–Bi phase dissolve rapidly. With the extension of leaching time, a large amount of rod-shape CaSO4 particles form, attach on the surface of the tellurium–bismuth ore particles, and then grow and coarsen. The (Mg,Fe,Al)(Si,Al)Ox(OH)y phase dissolves mainly within 60 min. Fe–S phase can be corroded but cannot dissolve completely. SiO2 cannot dissolve at all. Besides, H2SO4 and Fe3+ play a significant role on the dissolution of various minerals in the ore. Without Fe3+ or H2SO4 in immersion liquid, Te and Bi are difficult to be leached into the lixivium from the tellurium–bismuth ore. As H2SO4 concentration and Fe3+ concentration increase, Te–Bi phase and Fe–Mg–Al–Si–O phase gradually dissolve, the Fe–S phase can be corroded obviously but cannot dissolve, and the Si–O phase has no change. The dissolution of dolomite is mainly controlled by H2SO4. The dissolution behaviors of various minerals in the tellurium–bismuth ore during oxidic–acidic leaching were investigated systematically. Most of dolomite and Te–Bi phase dissolve rapidly. A large amount of rod-shape CaSO4 particles form, attach on the surface of the tellurium–bismuth ore particles, and then grow and coarsen. H2SO4 and Fe3+ play a significant role on the dissolution of various minerals in the ore.

Based on two considerations of making full use of the residual heat of vanadium slag and exploring a novel green vanadium extraction process, this article employs vanadium slag with high MgO content as raw material, blowing oxygen into the molten vanadium slag and using the residual heat of the vanadium slag to carry out high-temperature roasting experiments. XRD and SEM/EDS were used to characterize the phase evolution and morphology of vanadium slag with high MgO content during oxidation. The results show that at a high temperature of 1723 K, the trivalent vanadium in vanadium slag can be partly transformed into acid-soluble pentavalent vanadium. Titanium-bearing spinel was oxidized into a large amount of strip pseudobrookite Fe2TiO5. After oxidation, vanadium existed in the form of the solid solution of magnesium pyrovanadate (Mg, Mn, Ca)2V2O7. The leaching rate of roasted vanadium slag with high MgO content is significantly higher than that of industrial vanadium slag. With the increase of oxygen blowing time from 10 to 30 minutes, the leaching rate of roasted vanadium slag with high MgO content increases from 23.19 to 53.69 pct.

This article investigated the saturated solubility of MgO in converter vanadium slag and its influencing factors. The experimental results of MgO dissolution equilibrium are consistent with the theoretical calculation results. The results show that in MgO saturated vanadium slag, MgO mainly exists in MgV2O4 and MgSiO3. The increase of V2O3 content or the decrease of the FeO/SiO2 ratio is beneficial to increasing the saturated solubility of MgO in the FeO-SiO2-V2O3 slag system. The saturated solubility of MgO in vanadium slag increases from 7.5 to 8.0 wt.% when the temperature increases from 1633 to 1753 K. In addition, the solubility of MgO also increases with the increase of TiO2 and Al2O3 content and decreases with the increase of MnO content.

This paper investigated the non-isothermal crystallization kinetics of the spinel crystals in vanadium slags containing high CaO content. Experiments were performed in combination with theoretical calculation to address this issue, and statistical analyses based on the Crystal Size Distribution theory. The results indicate that low cooling rate and high CaO content benefit the growth of spinel crystals. The growth mechanism is revealed to be controlled by interface reactions and diffusion at the cooling rates of 5 K/min and 15 K/min, respectively. However, at higher temperatures (>1673 K), the growth of spinel crystals is controlled by nucleation. While the temperature is decreased to 1523 K at the cooling rate of 5 K/min, the mean diameter of spinel crystals could reach 36.44 μm. Experimental results combining with theoretical reveal that low cooling rate benefits spinels growth, especially for the interval of 1523 K–1200 K.

Objective: To observe the clinical effect of Rebixiao granule (RBXG) in treating repeatedly attacking acute gouty arthritis and through experimental study on blood uric acid to explore RBXGs therapeutic mechanism.Methods: Ninety repeatedly attacking acute gouty arthritis patients were divided into the treated group (n = 60) and control group (n = 30). The treated group was treated with RBXG, and the control group was treated with Futalin tablets (diclofenac sodium). The baseline treatment including good rest, low purine diet, sufficient water drinking and urine alkalization, etc. was then given to both groups. Hypoxanthine 600 mg/kg and niacin 100 mg/kg was applied to hyperuricemic mice by gastrogavage to establish the animal models.Results: The clinical effective rate of the treated group was 95.0% and that of the control 90.0%. Good therapeutic effects were won, insignificant difference (P>0.05)was shown between the two groups. However, the cure rate of the treated group was 26.7% while that of the control group was 10.0%, with significant difference (P