Search

Microalgae, a sustainable source of multi beneficial components has been discovered and could be utilised in pharmaceutical, bioenergy and food applications. This study aims to investigate the sugaring-out effect on the recovery of protein from wet green microalga, Chlorella sorokiniana CY1 which was assisted with sonication. A comparison of monosaccharides and disaccharides as one of the phase-forming constituents shows that the monosaccharides, glucose was the most suitable sugar in forming the phases with acetonitrile to enhance the production of protein (52% of protein). The protein productivity of microalgae was found to be significantly influenced by the volume ratio of both phases, as the yield of protein increased to 77%. The interval time between the sonication as well as the sonication modes were influencing the protein productivity as well. The optimum protein productivity was obtained with 10 s of resting time in between sonication. Pulse mode of sonication was suitable to break down the cell wall of microalgae compared to continuous mode as a lower protein yield was obtained with the application of continuous mode. The optimum condition for protein extraction were found as followed: 200 g/L glucose as bottom phase with volume ratio of 1:1.25, 10 s of resting time for ultrasonication, 5 s of ultrasonication in pulse mode and 0.25 g of biomass weight. The high yield of protein about 81% could be obtained from microalgae which demonstrates the potential of this source and expected to play an important role in the future.

A new approach has been developed for the preparation of Y(OH)3:Eu and Y2O3:Eu nanosheets using the sol–gel method and hydrothermal reactions. XRD patterns showed that the product was purely hexagonal-phase Y(OH)3. TEM images revealed that the nanosheets are square shaped (1 × 1 μm2) with a thickness of several tens of nanometers. In addition, it was found that cubic-phase Y2O3 nanosheets can be obtained by calcination of Y(OH)3 at 900 °C for 1 h. More importantly, the thus-prepared Y(OH)3:Eu and Y2O3:Eu nanosheet phosphors were found to exhibit a relatively high photoluminescence (PL) intensity.

The correlation in spatial intensity distribution between volumetric oscillation of multibubble and sonochemiluminescence in an ultrasonic standing-wave field is investigated through the measurements of scattered light from bubbles by changing the measuring position in the direction of sound propagation and sonochemiluminescence with luminol. When a thin light sheet, finer than half the wavelength of sound, is introduced into the cavitation bubbles at the anti-node of the sound pressure, the scattered light intensity oscillates temporally. The peak-to-peak light intensity corresponds to the number of the bubbles which contribute to the sonochemical reaction because the radius for oscillating bubbles at pressure antinode is restrictive in a certain range due to the shape instability and the action of Bjerknes force that expels from anti-node bubbles larger than the resonant size. The experimental results show that at the side near the water surface, the peak-to-peak light intensity is larger in comparison with the intensity near the sound source, and this tendency becomes apparent at higher input power. These light scattering results correspond with the spatial intensity distribution of the sonochemiluminescence with luminol. Therefore, it is interpreted that most of the cavitation bubbles contributing to the sonochemical reactions in the standing wave field exist near liquid surface. Present method of light scattering in reference with the image of the sonochemiluminescence is promising for evaluating spatial distribution of violently oscillating cavitation bubbles effective for sonochemical reactions.

Nanosized TiO2 supported on activated alumina was prepared using a sonochemical method. To prepare this supported material, direct immersion horn and cup horn ultrasonic systems were used. The efficiency of the sonochemical coating process was determined by UV photodecolourisation of the aqueous methyl orange solution. It was found that TiO2 supported on activated alumina prepared by the sonochemical method gave the maximum decolourisation efficiency. In that method itself, direct immersion horn gave a higher photodecolourisation activity as compared to the cup horn. The obtained results suggest that the direct immersion horn results in uniform, as well as a maximum number of TiO2 particles to be adsorbed on an activated alumina surface.