Search

This paper proposes a method to perform rapid and sensitive graphite furnace atomic absorption spectrometry (GFAAS) determination of Cr(VI) in vinegar samples without wet digestion. Taking into account low levels of Cr(VI) and the presence of several concomitants in the sample matrix, the proposed method uses single-phase liquid-liquid extraction (SPLLE). The method is automated, employing a flow-batch analyzer (FBA) which uses a mixing chamber designed to emulate a separation funnel promoting the formation/break of the single-phase solution, reaction and extraction. The Cr(VI) extraction procedure was performed by proportioned mixing of the vinegar sample (aqueous phase), amyl alcohol (organic phase), and ethanol (consolute) to form a single-phase solution. The chelating reagent sodium diethyldithiocarbamate (DDTC) dissolved in the consolute reacts rapidly with Cr(VI), in the single phase to produce a stable Cr-DDTC complex. The single-phase break step is performed by adding an excess of Britton-Robinson buffer, and then the organic phase enriched with Cr(VI) was analyzed by GFAAS. Factors such as extraction steps, single-phase composition, pH, chelating agent concentration, and flow-batch parameters were optimized. The FBA-SPLLE-GFAAS was evaluated in vinegar samples showing satisfactory analytical features in terms of limit of quantification (0.86 μg L −1 ), precision (RSD

In this study, a micro-flow-batch analyzer (μFBA) using an in-line cadmium reduction microcolumn for the photometric determination of nitrate and nitrite in dairy samples is described. The method is based on the Griess-Llosvay reaction and measuring of the absorbance at 540 nm using a green LED integrated into the μFBA built in the urethane-acrylate resin. Initially, the nitrite content of the dairy sample is analyzed in the mixing chamber, while the nitrate is reduced to nitrite in cadmium sponge microcolumn coupled to the microsystem. Nitrate content was calculated from the difference between nitrate plus nitrite (expressed as nitrite) and nitrite content. The analytical curve for nitrate and nitrite was linear in the work range of 10.0–100.0 μg L−1 with a correlation coefficient of 0.992 and 0.998, respectively. The limit of detection and relative standard deviation were estimated at 0.39 μg L−1 and

Density functional theory (DFT) was used to examine the interaction between molecular oxygen (O2) and macrocyclic iron complexes of the type FeN4 during the formation of FeN4–O2 adducts. In order to understand how this interaction is affected by different macrocyclic ligands, O2 was bonded to iron-tetraaza[14]annulene (FeTAA), iron-tetramethyl-tetraaza[14]annulene (FeTMTAA), iron-hexamethyl-tetraaza[14]annulene (FeHMTAA), iron dibenzotetraaza[14]annulene (FeDBTAA), and two iron-tetramethyl-dibenzotetraaza[14]annulene complexes (FeTMDBTAA1, FeTMDBTAA2). The ground state for FeN4-O2 adducts was the open-shell singlet. Analysis of the factors influencing the O2 bonding process showed that different macrocyclic ligands yielded adducts with differences in O-O and Fe-O2 bond lengths, total charge over the O2 fragment, O-O vibrational frequency, and spin density in the O2 fragment. A smaller energy gap between the α-HOMO of the FeN4 complexes and the β-LUMO of O2 increased the interaction between the complex and the O2 molecule. The order of activity was FeDBTAA