Search

In this work high quality ferroelectric PZT films have been prepared in-situ by hot RF magnetron sputtering. 200 mm wafer were coated with PZT films of 1 μm and 2 μm thickness at sputter rates of 45 nm/min in a high volume production sputtering tool. The films were grown on oxidized Si substrates prepared either with sputtered Ti/TiO2/Pt, sputtered Ti/TiO2/Pt/TiO2 or evaporated Ti/Pt bottom electrodes at substrate holder temperatures in the range from 550 °C to 700 °C. At these temperatures, the material nucleates in the requisite piezoelectric perovskite phase without need of an additional post annealing treatment.The films were investigated with respect to their chemical composition and their crystallographic, piezoelectric and dielectric properties. At an intermediate chuck temperature of 600 °C the PZT thin films were characterized by a minimum volume fraction of secondary nonpiezoelectric phases. A Zr/(Zr+Ti) ratio of 0.53 has been achieved matching the morphotropic phase boundary. By improving the deposition process and poling procedure, a notable high e31,f coefficient of -17.3 C/m2 has been obtained. The corresponding longitudinal piezoelectric constant was determined to have an effective longitudinal piezoelectric coefficient d33,f of 160 pm/V.

Kunststoffoptiken ersetzen heute bei vielen Anwendungen optische Bauteile aus Glas. Als okonomisch besonders gunstig erweist sich ihre Verwendung in der Massenfertigung, bei der Herstellung von multifunktionalen Optikbaugruppen und Baugruppen mit aspharischen Flachen sowie bei der Miniaturisierung optisch-mechanischer Problemstellungen.