Search

This work presents the design of a low voltage dynamic comparator for low-power ADC applications. The dynamic comparator uses a pre-amplifier powered by a floating reservoir capacitor and a positive feedback bulk structure. The output stage comprises a simple circuit to reduce the total voltage overhead necessary to define the logic levels. The powering scheme of the pre-amplifier, with a floating reservoir capacitor, contributes to reduce the impacts of global process variability. The positive feedback bulk structure lowers the threshold voltages of the pre-amplifier transistors at the sampling phase. Such structure also provides positive feedback signal during the comparison phase to provide extra transconductance. The proposed dynamic comparator is designed and simulated in a 28 nm CMOS technology and reaches an IRN below of the quantization noise of a 10 bits differential ADCs working with 600 mV power supply. The dynamic comparator achieves 237 μV input-referred noise, while consuming only 38.8 fJ per comparison and having a nominal delay of 5.77 ns.

This work presents a resistorless self-biased and small area sub-bandgap voltage reference that works in the nano-ampere consumption range with 0.75 V of power supply. The circuit applies a curvature compensation technique that allows an extended temperature range without compromising the temperature stability. The behavior of the circuit is analytically described, and a design methodology is proposed which allows the separate adjustment of the bipolar junction transistor bias current and its curvature compensation. Simulation results are presented for a 180 nm CMOS process, where a reference voltage of 469 mV is designed, with a temperature coefficient of 5 ppm/°C for the ź40 to 125 °C extended temperature range. The power consumption of the whole circuit is 16.3 nW under a 0.75 V power supply at 27 °C. The estimated silicon area is 0.0053 mm2.

In this work a resistorless sub-bandgap voltage reference topology is presented. It is a self-biased and small area circuit that works in the nano-ampere consumption range, and under 1 V of power supply. The behavior of the circuit is analytically described, a design methodology is proposed and simulation results are presented for two CMOS processes, XFAB 0.18 μm and IBM 0.13 μm. Experimental results from one fabrication run demonstrate a reference voltage of 570 mV, with a temperature coefficient as low as 11 ppm/°C for the 0---125 °C range, while the power consumption of the whole circuit is 5 nW under a 0.9 V supply at 27 °C. The occupied silicon area is 0.0022 mm$$^2$$2.