Search

Chiral epichlorohydrin (ECH) is an attractive intermediate for chiral pharmaceuticals and chemicals preparation. The asymmetric synthesis of chiral ECH using 1,3-dicholoro-2-propanol (1,3-DCP) catalyzed by a haloalcohol dehalogenase (HHDH) was considered as a feasible approach. However, the reverse ring opening reaction caused low optical purity of chiral ECH, thus severely restricts the industrial application of HHDHs. In the present study, a novel selective conformation adjustment strategy was developed with an engineered HheCPS to regulate the kinetic parameters of the forward and reverse reactions, based on site saturation mutation and molecular simulation analysis. The HheCPS mutant E85P was constructed with a markable change in the conformation of (S)-ECH in the substrate pocket and a slight impact on the interaction between 1,3-DCP and the enzyme, which resulted in the kinetic deceleration of the reverse reactions. Compared with HheCPS, the catalytic efficiency (kcat(S)-ECH/Km(S)-ECH) of the reversed reaction dropped to 0.23-fold (from 0.13 to 0.03 mM−1 s−1), while the catalytic efficiency (kcat(1,3-DCP)/Km(1,3-DCP)) of the forward reaction only reduced from 0.83 to 0.71 mM−1 s−1. With 40 mM 1,3-DCP as substrate, HheCPS E85P catalyzed the synthesis of (S)-ECH with the yield up to 55.35% and the e.e. increased from 92.54 to >99%. Our work provided an effective approach for understanding the stereoselective catalytic mechanism as well as the green manufacturing of chiral epoxides. [ABSTRACT FROM AUTHOR]

Hydrogenation plays an important role in the production of bulk and fine chemicals. In the present work, the hydrogenation process of 1-cyanocyclohexaneacetic acid (1-CA), a key intermediate in the chemo-enzymatic synthesis of the antiepileptic drug gabapentin, was investigated. The catalysts were screened, the operating parameters for the 1-CA hydrogenation were determined by response surface methodology, and the effects of biological impurities on the reaction and catalysts were investigated. The reaction temperature, reaction solution pH and reaction time were identified as the main factors for hydrogenation by single-factor experiments. Under the optimal reaction conditions: reaction temperature 110 °C, solution pH 12.33, reaction time 3.74 h, hydrogen pressure 2 MPa and stirring speed 500 rpm, the substrate conversion reached 100%, and the total product yield reached 96.40%, which was very close to the prediction (96.88%). It was demonstrated that biological impurities greatly affect the reaction rate of hydrogenation, as well as the activity and reusability of the catalyst, in which protein impurities lead to catalyst deactivation through cumulative deposition on the catalyst surface and within the pores. [ABSTRACT FROM AUTHOR]

D-Allulose 3-epimerase (DAE) is a vital biocatalyst for the industrial synthesis of D-allulose, an ultra-low calorie rare sugar. However, limited thermostability of DAEs hinders their use at high-temperature production. In this research, hyperthermophilic TI-DAE (Tm = 98.4 ± 0.7 ℃) from Thermotoga sp. was identified via in silico screening. A comparative study of the structure and function of site-directed saturation mutagenesis mutants pinpointed the residue I100 as pivotal in maintaining the high-temperature activity and thermostability of TI-DAE. Employing TI-DAE as a biocatalyst, D-allulose was produced from D-fructose with a conversion rate of 32.5%. Moreover, TI-DAE demonstrated excellent catalytic synergy with glucose isomerase CAGI, enabling the one-step conversion of D-glucose to D-allulose with a conversion rate of 21.6%. This study offers a promising resource for the enzyme engineering of DAEs and a high-performance biocatalyst for industrial D-allulose production. [ABSTRACT FROM AUTHOR]

The unspecific peroxygenase (UPO) from Cyclocybe aegerita (AaeUPO) can selectively oxidize C–H bonds using hydrogen peroxide as an oxygen donor without cofactors, which has drawn significant industrial attention. Many studies have made efforts to enhance the overall activity of AaeUPO expressed in Komagataella phaffii by employing strategies such as enzyme-directed evolution, utilizing appropriate promoters, and screening secretion peptides. Building upon these previous studies, the objective of this study was to further enhance the expression of a mutant of AaeUPO with improved activity (PaDa-I) by increasing the gene copy number, co-expressing chaperones, and optimizing culture conditions. Our results demonstrated that a strain carrying approximately three copies of expression cassettes and co-expressing the protein disulfide isomerase showed an approximately 10.7-fold increase in volumetric enzyme activity, using the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) as the substrate. After optimizing the culture conditions, the volumetric enzyme activity of this strain further increased by approximately 48.7%, reaching 117.3 U/mL. Additionally, the purified catalytic domain of PaDa-I displayed regioselective hydroxylation of R-2-phenoxypropionic acid. The results of this study may facilitate the industrial application of UPOs. Key points: • The secretion of the catalytic domain of PaDa-I can be significantly enhanced through increasing gene copy numbers and co-expressing of protein disulfide isomerase. • After optimizing the culture conditions, the volumetric enzyme activity can reach 117.3 U/mL, using the 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) as the substrate. • The R-2-phenoxypropionic acid can undergo the specific hydroxylation reaction catalyzed by catalytic domain of PaDa-I, resulting in the formation of R-2-(4-hydroxyphenoxy)propionic acid. [ABSTRACT FROM AUTHOR]

D-Pantothenic acid, as a momentous vitamin, is extensively applied to feed, medicine, cosmetics and other fields. However, there are still limitations to produce D-pantothenic acid by microbial fermentation at present. In this paper, we constructed a recombinant strain for D-pantothenic acid production by blocking the organic acid pathway, boosting pyruvate biosynthesis, relieving feedback inhibition of acetolactate synthase, improving glucose intake capacity, and modifying essential genes in the metabolic pathway. In addition, a new acetolactate isomeroreductase mutant V412A origin from Escherichia coli (EcAHAIR) encoded by ilvC was obtained to explore its substrate promiscuity. Compared with the wild type, the variant EcAHAIR-V412A has reduced steric hindrance and enhanced intermolecular forces, resulting in a high affinity for 2-acetolactate. Eventually, the fermentation production of the final strain DPAN19/trc-ilvCV412A reached 4.65 g/L, increased by 192.5% compared with strain DPA8 in shake flask cultivation and produced 62.82 g/L D-pantothenic acid in a 5 L bioreactor. The metabolic engineering strategies and enzyme modification approaches described in this paper provide a particular perspective for the bio-manufacturing of D-pantothenic acid, branched-chain amino acids and its derivates. [ABSTRACT FROM AUTHOR]

S-adenosyl-l-methionine (SAM), a vital physiologically active substance in living organisms, is produced by fermentation over Saccharomyces cerevisiae. The main limitation in SAM production was the low biosynthesis ability of SAM in S. cerevisiae. The aim of this work is to breed an SAM-overproducing mutant through UV mutagenesis coupled with high-throughput selection. Firstly, a high-throughput screening method by rapid identification of positive colonies was conducted. White colonies on YND medium were selected as positive strains. Then, nystatin/sinefungin was chosen as a resistant agent in directed mutagenesis. After several cycles of mutagenesis, a stable mutant 616–19-5 was successfully obtained and exhibited higher SAM production (0.41 g/L vs 1.39 g/L). Furthermore, the transcript levels of the genes SAM2, ADO1, and CHO2 involved in SAM biosynthesis increased, while ergosterol biosynthesis genes in mutant 616–19-5 significantly decreased. Finally, building on the above work, S. cerevisiae 616–19-5 could produce 10.92 ± 0.2 g/L SAM in a 5-L fermenter after 96 h of fermentation, showing a 2.02-fold increase in the product yield compared with the parent strain. Paving the way of breeding SAM-overproducing strain has improved the good basis for SAM industrial production. [ABSTRACT FROM AUTHOR]

Steroid-based drugs are now mainly produced by the microbial transformation of phytosterol, and a two-step bioprocess is adopted to reach high space–time yields, but byproducts are frequently observed during the bioprocessing. In this study, the catabolic switch between the C19- and C22-steroidal subpathways was investigated in resting cells of Mycobacterium neoaurum NRRL B-3805, and a dose-dependent transcriptional response toward the induction of phytosterol with increased concentrations was found in the putative node enzymes including ChoM2, KstD1, OpccR, Sal, and Hsd4A. Aldolase Sal presented a dominant role in the C22 steroidal side-chain cleavage, and the byproduct was eliminated after sequential deletion of opccR and sal. Meanwhile, the molar yield of androst-1,4-diene-3,17-dione (ADD) was increased from 59.4 to 71.3%. With the regard of insufficient activity of rate-limiting enzymes may also cause byproduct accumulation, a chromosomal integration platform for target gene overexpression was established supported by a strong promoter L2 combined with site-specific recombination in the engineered cell. Rate-limiting steps of ADD bioconversion were further characterized and overcome. Overexpression of the kstD1 gene further strengthened the bioconversion from AD to ADD. After subsequential optimization of the bioconversion system, the directed biotransformation route was developed and allowed up to 82.0% molar yield with a space–time yield of 4.22 g·L−1·day−1. The catabolic diversion elements and the genetic overexpression tools as confirmed and developed in present study offer new ideas of M. neoaurum cell factory development for directed biotransformation for C19- and C22-steroidal drug intermediates from phytosterol. Key points: • Resting cells exhibited a catabolic switch between the C19- and C22-steroidal subpathways. • The C22-steroidal byproduct was eliminated after sequential deletion of opccR and sal. • Rate-limiting steps were overcome by promoter engineering and chromosomal integration. [ABSTRACT FROM AUTHOR]

Transaminase (TA) is a crucial biocatalyst for enantioselective production of the herbicide L-phosphinothricin (L-PPT). The use of enzymatic cascades has been shown to effectively overcome the unfavorable thermodynamic equilibrium of TA-catalyzed transamination reaction, also increasing demand for TA stability. In this work, a novel thermostable transaminase (PtTA) from Pseudomonas thermotolerans was mined and characterized. The PtTA showed a high specific activity (28.63 U/mg) towards 2‐oxo‐4‐[(hydroxy)(methyl)phosphinoyl]butyric acid (PPO), with excellent thermostability and substrate tolerance. Two cascade systems driven by PtTA were developed for L-PPT biosynthesis, including asymmetric synthesis of L-PPT from PPO and deracemization of D, L-PPT. For the asymmetric synthesis of L-PPT from PPO, a three-enzyme cascade was constructed as a recombinant Escherichia coli (E. coli G), by co-expressing PtTA, glutamate dehydrogenase (GluDH) and D-glucose dehydrogenase (GDH). Complete conversion of 400 mM PPO was achieved using only 40 mM amino donor L-glutamate. Furthermore, by coupling D-amino acid aminotransferase (Ym DAAT) from Bacillus sp. YM‐1 and PtTA, a two-transaminase cascade was developed for the one-pot deracemization of D, L-PPT. Under the highest reported substrate concentration (800 mM D, L-PPT), a 90.43% L-PPT yield was realized. The superior catalytic performance of the PtTA-driven cascade demonstrated that the thermodynamic limitation was overcome, highlighting its application prospect for L-PPT biosynthesis. Key points: • A novel thermostable transaminase was mined for L-phosphinothricin biosynthesis. • The asymmetric synthesis of L-phosphinothricin was achieved via a three-enzyme cascade. • Development of a two-transaminase cascade for D, L-phosphinothricin deracemization. [ABSTRACT FROM AUTHOR]

Tacrolimus (FK506) is a widely used and clinically important immunosuppressant drug that can be produced by fermentation of Streptomyces tsukubaensis. The industrial strains are typically obtained through multiple rounds of mutagenesis and screening, a labor-intensive process. We have established an efficient yeast cell based screening method for the evolutionary process of high-FK506-yielding strain. The S. tsukubaensis strains of different FK506 yields were tested for zone of growth inhibition of the wild type and calcineurin mutant (cnb1∆) yeast strains. We found that different FK506 yields correspond well to altered yeast growth inhibitions. Based on the combinational inhibition effects of FK506 with different antifungals that have been frequently reported, we also tested the zone of inhibition by addition of fluconazole, amphotericin B and caspofungin to the medium. In the end, for the best screening performance, we systemically evaluated the strategy when different yeast strains and different antifungals were used according to the clarity, size, and divergence of the inhibition circles. Using different yeast strains and antifungals, we successfully broadened the screening spectrum. An efficient high-FK506-yield S. tsukubaensis screening method has been established and optimized. [ABSTRACT FROM AUTHOR]

With potent herbicidal activity, biocatalysis synthesis of l-glufosinate has drawn attention. In present research, NAP-Das2.3, a deacetylase capable of stereoselectively resolving N-acetyl-l-glufosinate to l-glufosinate mined from Arenimonas malthae, was heterologously expressed and characterized. In Escherichia coli, NAP-Das2.3 activity only reached 0.25 U/L due to the formation of inclusive bodies. Efficient soluble expression of NAP-Das2.3 was achieved in Pichia pastoris. In shake flask and 5 L bioreactor fermentation, NAP-Das2.3 activity by recombinant P. pastoris reached 107.39 U/L and 1287.52 U/L, respectively. The optimum temperature and pH for N-acetyl-glufosinate hydrolysis by NAP-Das2.3 were 45 °C and pH 8.0, respectively. The Km and Vmax of NAP-Das2.3 towards N-acetyl-glufosinate were 25.32 mM and 19.23 μmol mg−1 min−1, respectively. Within 90 min, 92.71% of L-enantiomer in 100 mM racemic N-acetyl-glufosinate was converted by NAP-Das2.3. l-glufosinate with high optical purity (e.e.P above 99.9%) was obtained. Therefore, the recombinant NAP-Das2.3 might be an alternative for l-glufosinate biosynthesis. [ABSTRACT FROM AUTHOR]

The structural integrity and esthetic appeal of concrete can be compromised by concrete cracks. Promise has been shown by microbe-induced calcium carbonate precipitation (MICP) as a solution for concrete cracking, with a focus on urease-producing microorganisms in research. Bacillus cereus was isolated from soil and employed for this purpose in this study due to its high urease activity. The strain exhibited strong tolerance for alkaline media and high salt levels, which grew at a pH of 13 and 4% salt concentration. The repair of concrete cracks with this strain was evaluated by assessing the effects of four different thickeners at varying concentrations. The most effective results were achieved with 10 g/L of sodium carboxymethyl cellulose (CMC-Na). The data showed that over 90% repair of cracks was achieved by this system with an initial water penetration time of 30 s. The study also assessed the quantity and sizes of crystals generated during the bacterial mineralization process over time to improve our understanding of the process. Key points: • MICP using Bacillus cereus shows potential for repairing concrete cracks. • Strain tolerates alkaline media and high salt levels, growing at pH 13 and 4% salt concentration. • Sodium carboxymethyl cellulose (CMC-Na) at 10 g/L achieved over 90% repair of cracks. [ABSTRACT FROM AUTHOR]

Cellobiose 2-epimerase (CE) is ideally suited to synthesize lactulose from lactose, but the poor thermostability and catalytic efficiency restrict enzymatic application. Herein, a non-characterized CE originating from Caldicellulosiruptor morganii (CmCE) was discovered in the NCBI database. Then, a smart mutation library was constructed based on FoldX ΔΔG calculation and modeling structure analysis, from which a positive mutant D226G located within the α8/α9 loop exhibited longer half-lives at 65–75 °C as well as lower Km and higher kcat/Km values compared with CmCE. Molecular modeling demonstrated that the improvement of D226G was largely attributed to the rigidification of the flexible loop, the compactness of the catalysis pocket and the increment of substrate-binding capability. Finally, the yield of synthesizing lactulose catalyzed by D226G reached 45.5%, higher than the 35.9% achieved with CmCE. The disclosed effect of the flexible loop on enzymatic stability and catalysis provides insight to redesign efficient CEs to biosynthesize lactulose. [ABSTRACT FROM AUTHOR]

Erythritol is a novelty 4-carbon sugar polyol and has great potential to be used as the precursor of some platform chemicals. The increasing cost of glucose poses researchers shifting insights to the cheaper biodiesel raw materials. Herein, we engineered a non-degradation, non-byproducts Yarrowia lipolytica for the erythritol production with high-titer from glycerol. Initially, the degradation and competition modules were blocked by URA3 counter-selection marker. Subsequently, a shortened biosynthetic pathway was explored to elevate its synthetic flux by multi-modules combination expression of functional genes. Furthermore, a screened glycerol transporter ScFPS1 was integrated into ERY6 genome to promote the glycerol uptake. The constructed strain ERY8 produced 176.66 g/L erythritol in the 5-L bioreactor with a yield and productivity of 0.631 g/g and 1.23 g/L/h, respectively, which achieved the highest fermentation production efficiency till date. This study proposed a novel multi-modules combination strategy for effectively engineering Y. lipolytica to produce erythritol using glycerol. [ABSTRACT FROM AUTHOR]

Fructose, which is produced by the isomerization of glucose isomerase, is a crucial precursor for the biosynthesis of rare sugars. In this study, thermophilic glucose isomerases (GI) from Caldicellulosiruptor acetigenus (CAGI), Thermoanaerobacter thermocopriae (TTGI), and Thermotoga petrophila (TPGI) were screened from GenBank database by a virtual probe and were successfully expressed in Escherichia coli BL21(DE3). The results of characterization demonstrated that the optimal pH for CAGI and TTGI were 8.0 and were maintained at 80% in a slightly acidic environment. The relative residual activities of CAGI and TTGI were found to be 40.6% and 52.6%, respectively, following an incubation period of 24 h at 90 ℃. Furthermore, CAGI and TTGI exhibited superior catalytic performance that their reaction equilibrium both reached only after an hour at 85 ℃ with 200 g/L glucose, and the highest conversion rates were 54.2% and 54.1%, respectively. This study identifies competitive enzyme candidates for fructose production in the industry with appreciable cost reduction. [ABSTRACT FROM AUTHOR]

Echinocandin B (ECB) is the key precursor compound of the antifungal drug Anidulafungin. The effects of the five precursor amino acids on ECB biosynthesis were firstly investigated. It showed that although L-threonine was a main compound of the hexapeptide scaffold of ECB, exogenous addition of L-threonine had no significant effect on the increase of ECB fermentation titer. Meanwhile, the ECB fermentation titer with methyl oleate showed two times higher than that of the other carbon sources. Transcription level analysis of the key genes for ECB biosynthesis indicated that the gene an655543 related to L-threonine biosynthesis showed higher value during the fermentation process, therefore, the exogenous addition of L-threonine had no obvious affection. Furthermore, it indicated that the transcription level of gene ecdA might be the main restriction factor for the ECB biosynthesis. The study provided the research foundation for the modification of the ECB producing strains in the following work. [ABSTRACT FROM AUTHOR]

Methionine is the only one of the essential amino acids that contain sulfur, widely used as a feed additive in agriculture. In this study, the availability of 5-methyl-tetrahydrofolate was confirmed as the main limitation in the complex multibranched biosynthetic pathway of L-methionine. The cycle of one-carbon units was thoroughly investigated and modified to supply 5-methyl-tetrahydrofolate for L-methionine production, such as enhancing the supply of precursor, expediting the conversion rate of the cycle, introducing exogenous serine hydroxymethyltransferase and increasing pool size of one-carbon units carrier. The final strain MYA/pAmFA-4 was able to produce 20.89 g/L L-methionine by fed-batch fermentation, which was the highest titer reported in the literatures. This study is instructive for other metabolites biosynthesized needing one-carbon units or having a complex multibranched biosynthetic pathway. [ABSTRACT FROM AUTHOR]

O-Acetyl-L-homoserine (OAH) is a potentially important platform metabolic intermediate for the production of homoserine lactone, methionine, 1,4-butanediol and 1,3-propanediol which have giant market value. Currently, multiple strategies have been adopted to explore sustainable production of OAH. However, the production of OAH by consuming cheap bio-based feedstocks with Escherichia coli as the chassis is still in its infancy. Construction of high yield OAH-producing strains is of great significance in industry. In this study, we introduced an exogenous metA from Bacillus cereus (metXbc) and engineered an OAH-producing strain by combinatorial metabolic engineering. Initially, exogenous metXs/metA were screened and used to reconstruct an initial biosynthesis pathway of OAH in E. coli. Subsequently, the disruption of degradation and competitive pathways combined with optimal expression of metXbc were carried out, accumulating 5.47 g/L OAH. Meanwhile, the homoserine pool was enriched by overexpressing metL with producing 7.42 g/L OAH. Lastly, the carbon flux of central carbon metabolism was redistributed to balance the metabolic flux of homoserine and acetyl coenzyme A (acetyl-CoA) in OAH biosynthesis with accumulating 8.29 g/L OAH. The engineered strain produced 24.33 g/L OAH with a yield of 0.23 g/g glucose in fed-batch fermentation. By these strategies, the key nodes for OAH synthesis were clarified and corresponding strategies were proposed. This study would lay a foundation for OAH bioproduction. [ABSTRACT FROM AUTHOR]

Driven by the massive demand in recent years, the production of β-alanine has significantly progressed in chemical and biological ways. Although the chemical method is relatively mature compared to biological synthesis, its high cost of waste disposal and environmental pollution does not meet the environmental protection standard. Hence, the biological method has become more prevalent as a potential alternative to the chemical synthesis of β-alanine in recent years. As a result, the aspartate pathway from l-aspartate to β-alanine (the most significant rate-limiting step in the β-alanine synthesis) catalyzed by l-aspartate-α-decarboxylase (ADC) has become a research hotspot in recent years. Therefore, it is vital to comprehensively understand the different enzymes that possess a similar catalytic ability to ADC. This review will investigate the exploratory process of unique synthesis features and catalytic properties of ADC/ADC-like enzymes in particular creatures with similar catalytic capacity or high sequence homology. At the same time, we will discuss the different β-alanine production methods which can apply to future industrialization. [ABSTRACT FROM AUTHOR]

Steroidal resource occupies a vital proportion in the pharmaceutical industry attributing to their important therapeutic effects on fertility, anti-inflammatory and antiviral activities. Currently, microbial transformation from phytosterol has become the dominant strategy of steroidal drug intermediate synthesis that bypasses the traditional chemical route. Mycobacterium sp. serve as the main industrial microbial strains that are capable of introducing selective functional modifications of steroidal intermediate, which has become an indispensable platform for steroid biomanufacturing. By reviewing the progress in past two decades, the present paper concentrates mainly on the microbial rational modification aspects that include metabolic pathway editing, key enzymes engineering, material transport pathway reinforcement, toxic metabolic intermediates removal and byproduct reconciliation. In addition, progress on omics analysis and direct genetic manipulation are summarized and classified that may help reform the industrial hosts with more efficiency. The paper provides an insightful present for steroid biomanufacturing especially on the current trends and prospects of mycobacteria. [ABSTRACT FROM AUTHOR]

The plant growth hormone gibberellic acid (GA3), as one of the representative secondary metabolites, is widely used in agriculture, horticulture and brewing industry. GA3 is detected in both plants and several fungi with the ability to stimulate plant growth. Currently, the main mode of industrial production of GA3 is depended on the microbial fermentation via long-period submerged fermentation using Fusarium fujikuroi as the only producing strain, qualified for its natural productivity. However, the demand of large-sale industrialization of GA3 was still restricted by the low productivity. The biosynthetic route of GA3 in F. fujikuroi is now well-defined. Furthermore, the multi-level regulation mechanisms involved in the whole network of GA3 production have also been gradually unveiled by the past two decades based on the identification and characterization of several global regulators and their mutual functions. Combined with the quick development of genetic manipulation techniques, the rational modification of producing strain F. fujikuroi development become practical for higher productivity achievement. Herein, we review the latest advances in the molecular regulation of GA3 biosynthesis in F. fujikuroi and conclude a comprehensive network involving nitrogen depression, global regulator, histone modification and G protein signaling pathway. Correspondingly, the bioengineering strategies covering conventional random mutation, genetic manipulating platform development, metabolic edition and fermentation optimization were also systematically proposed. [ABSTRACT FROM AUTHOR]

With the ban of highly toxic herbicides, such as paraquat and glyphosate, phosphinothricin (PPT) is becoming the most popular broad-spectrum and highly effective herbicide. The current PPT products in the market are usually a racemic mixture with two configurations, the D-type and L-type, of which only the L-PPT has the herbicidal activity. The racemic product is not atom economic, more toxic and may cause soil damage. Asymmetric synthesis of L-PPT has become a research focus in recent years, while biological synthesis methods are preferred for its character of environmental friendly and requiring less reaction steps when being compared to the chemical methods. We have developed a biological synthesis route to produce optically pure L-PPT from D,L-PPT in two steps using 2-carbonyl-4- (hydroxymethyl phosphonyl) butyric acid as the intermediate. In this study, we expressed the glutamate dehydrogenase and glucose dehydrogenase using Pichia pastoris as the first time. After a series of optimization, the total L-PPT yield reached 84%. The developed synthesis system showed a high potential for future industrial application. Compare to the previous plasmid-carrying-E. coli expression system, the established method may avoid antibiotic usage and provided an alternative way for industrial synthesis of optically pure L-PPT. [ABSTRACT FROM AUTHOR]

This study investigated the effects of different bulking agents (i.e., sawdust, wheat straw, rice straw, and corncob) on bacterial structure and functions for organic degradation during food waste in-situ rapid biological reduction (IRBR) inoculated with microbial agent. Results showed that the highest organic degradation (409.5 g/kg total solid) and volatile solids removal efficiency (41.0%) were achieved when wheat straw was used, largely because the degradation of readily degradable substrates and cellulose was promoted by this bulking agent. Compared with other three bulking agents, the utilization of wheat straw was conducive to construct a more suitable environmental condition (moisture content of 18.0–28.2%, pH of 4.91–5.87) for organic degradation during IRBR process, by virtue of its excellent structural and physiochemical properties. Microbial community analysis suggested that the high-moisture environment in rice straw treatment promoted the growth of Staphylococcus and inhibited the activity of the inoculum. By contrast, lowest bacterial richness was observed in corncob treatment due to the faster water loss. Compared with these two bulking agents, sawdust and wheat straw treatment led to a more stable bacterial community structure, and the inoculated Bacillus gradually became the dominant genus (36.6–57.8%) in wheat straw treatment. Predicted metagenomics analysis showed that wheat straw treatment exhibited the highest carbohydrate metabolism activity which improved the pyruvate, amino sugar and nucleotide sugar metabolism, and thereby promoted the organic degradation and humic substrate production. These results indicated that wheat straw was a more desirable bulking agent, and revealed the potential microbial organics degradation mechanism in IRBR process. [ABSTRACT FROM AUTHOR]

Obtaining a sucrose isomerase (SIase) with high catalytic performance is of great importance in industrial production of isomaltulose (a reducing sugar). In order to obtain such SIase mutant, a high-throughput screening system in microtiter plate format was developed based on a widely used 2,4-dinitrosalicylic acid (DNS) method for determination of reducing sugar. An SIase from Erwinia sp. Ejp617 (ErSIase) was selected to improve its catalytic efficiency. After screening of ~ 8000 mutants from a random mutagenesis library, Q209 and R456 were identified as beneficial positions. Saturation mutagenesis of the two positions resulted in a double-site mutant ErSIase_Q209S-R456H that showed the highest catalytic efficiency, and its specific activity reached 684 U/mg that is 17.5-fold higher than that of the wild-type ErSIase. By employing the lyophilized Escherichia coli (E. coli) cells harboring ErSIase_Q209S-R456H, a high space–time yield (STY = 3.9 kg/(L·d)) was achieved toward 600 g/L sucrose. Furthermore, the in silico analysis suggested that the hydrogen bond network was improved and steric hindrance was reduced due to the beneficial substitutions. Key points • A sucrose isomerase mutant with high catalytic efficiency was obtained. • The highest space–time yield was achieved toward high-concentration sucrose. • The optimized H-bond network contributed to the enhanced catalytic efficiency. [ABSTRACT FROM AUTHOR]

Pullulanase is a well-known debranching enzyme that can specifically hydrolyze α-1,6-glycosidic linkages in starch and oligosaccharides, however, it suffers from low stability and catalytic efficiency under industrial conditions. In the present study, four residues (A365, V401, H499, and T504) lining the catalytic pocket of Anoxybacillus sp. AR-29 pullulanase (PulAR) were selected for site-directed mutagenesis (SDM) by using a structure-guided consensus approach. Five beneficial mutants (PulAR-A365V, PulAR-V401C, PulAR-A365/V401C, PulAR-A365V/V401C/T504V, and PulAR-A365V/V401C/T504V/H499A) were created, which showed enhanced thermostability, pH stability, and catalytic efficiency. Among them, the quadruple mutant PulAR-A365V/V401C/T504V/H499A displayed 6.6- and 9.6-fold higher catalytic efficiency toward pullulan at 60 ℃, pH 6.0 and 5.0, respectively. In addition, its thermostabilities at 60 ℃ and 65 ℃ were improved by 2.6- and 3.1-fold, respectively, compared to those of the wild-type (WT). Meanwhile, its pH stabilities at pH 4.5 and 5.0 were 1.6- and 1.8-fold higher than those of WT, respectively. In summary, the catalytic performance of PulAR was significantly enhanced by a structure-guided consensus approach. The resultant quadruple mutant PulAR-A365V/V401C/T504V/H499A demonstrated potential applications in the starch industry. [ABSTRACT FROM AUTHOR]

The Escherichia coli (E. coli) has been widely employed in biotechnology industry and academia. However, the bioproduct manufacturing driven by E. coli is prone to the phage contamination. Good laboratory/factory hygiene may decrease but not avoid completely the chances of the phage contamination. The present study aims to resolve this problem by engineering laboratory/factory-specific phage-resistant E. coli strains. By adding a laboratory or factory derived phage into the atmospheric and room temperature plasma mutagenized E. coli, a phage-resistant strain could be generated. Interestingly, the resistant strain exhibited cross-resistance to unencountered phages. When operating the resistant strain in a polluted environment, the phage contamination was largely prevented. There was no significant difference in heterogeneous protein production between the parental strain and the phage-resistant strain. Importantly, it requires only one day to generate the phage-resistant strain. This practical method for engineering laboratory/factory-specific phage-resistant strains may have great potential in resuming E. coli operation in laboratories and factories during phage contamination outbreaks. [ABSTRACT FROM AUTHOR]

2-chloronicotinic acid (2-CA) is a key precursor for the synthesis of a series of pesticides and pharmaceuticals. Nitrilase-catalyzed bioprocess is a promising method for 2-CA production from 2-chloronicotinonitrile (2-CN). In this study, a mutant of nitrilase from Rhodococcus zopfii (RzNIT/W167G) was constitutively overexpressed with Escherichia coli as host, which exhibited a onefold increase in enzymatic activity compared with inducible expression. Biosynthesis of 2-CA using whole cells harboring nitrilase as biocatalysts were investigated and 318.5 mM 2-CA was produced, which was the highest level for 2-CA production catalyzed by nitrilase to date. 2-CA was recovered from the reaction mixture through a simple acidification step with a recovery yield of 90%. This study developed an efficient bioprocess for 2-CA with great potential for industrial application. [ABSTRACT FROM AUTHOR]

Sucrose isomerase (SIase) is a key enzyme used for the production of isomaltulose from sucrose. In this study, an SIase gene from Erwinia sp. Ejp617 (ErSIase) was heterologously expressed in Escherichia coli BL21(DE3), and the recombinant ErSIase was served as biocatalyst combined with the graphene oxide (GO) as carrier for ErSIase immobilization. The Fourier transform infrared spectroscopy, transmission electron microscope, and confocal laser microscopy analyses showed that ErSIase was successfully immobilized on the surface of GO to form ErSIase-GO. The loading capacity of ErSIase on GO reached up to 460 mg/g with a specific activity of 727.04 U/mg protein when the optimal immobilization time of 12 h and the ErSIase/GO ratio of 7.4:4 (w/w) were applied. A high conversion rate of 95.3% was reached from sucrose to isomaltulose using ErSIase-GO as biocatalyst with 600 g/L sucrose as substrate, after 180 min at 40 °C and pH 6.0. Moreover, stabilities of the immobilized ErSIase-GO in the aspects of thermal, pH, and storage were improved, and its activity after 10 batches still remained around 80% under the optimal conditions. The Km value of ErSIase-GO was 29.32 mM, and the kcat/Km was increased to 27.34 s−1 mM−1 when 0.1% (w/v) detergent NP40 was added. These results indicated that the ErSIase was well immobilized onto GO, and the ErSIase-GO is a promising biocatalyst with high operational stability and catalytic activity for industrial production of isomaltulose. [ABSTRACT FROM AUTHOR]

Nicotinamide mononucleotide (NMN) or Nicotinamide-1-ium-1-β-D-ribofuranoside 5′-phosphate is a nucleotide that can be converted into nicotinamide adenine dinucleotide (NAD) in human cells. NMN has recently attracted great attention because of its potential as an anti-aging drug, leading to great efforts for its effective manufacture. The chemical synthesis of NMN is a challenging task since it is an isomeric compound with a complicated structure. The majority of biological synthetic routes for NMN is through the intermediate phosphoribosyl diphosphate (PRPP), which is further converted to NMN by nicotinamide phosphoribosyltransferase (Nampt). There are various routes for the synthesis of PRPP from simple starting materials such as ribose, adenosine, and xylose, but all of these require the expensive phosphate donor adenosine triphosphate (ATP). Thus, an ATP regeneration system can be included, leading to diminished ATP consumption during the catalytic process. The regulations of enzymes that are not directly involved in the synthesis of NMN are also critical for the production of NMN. The aim of this review is to present an overview of the biological production of NMN with respect to the critical enzymes, reaction conditions, and productivity. [ABSTRACT FROM AUTHOR]

With increased attention to excellent biocatalysts, evolving methods based on nature or unnatural amino acid (UAAs) mutagenesis have become an important part of enzyme engineering. The emergence of powerful method through expanding the genetic code allows to incorporate UAAs with unique chemical functionalities into proteins, endowing proteins with more structural and functional features. To date, over 200 diverse UAAs have been incorporated site-specifically into proteins via this methodology and many of them have been widely exploited in the field of enzyme engineering, making this genetic code expansion approach possible to be a promising tool for modulating the properties of enzymes. In this context, we focus on how this robust method to specifically incorporate UAAs into proteins and summarize their applications in enzyme engineering for tuning and expanding the functional properties of enzymes. Meanwhile, we aim to discuss how the benefits can be achieved by using the genetically encoded UAAs. We hope that this method will become an integral part of the field of enzyme engineering in the future. [ABSTRACT FROM AUTHOR]

Phosphinothricin (PPT) is one of the most prevalently using herbicides. The commercial phosphinothricin products are generally in the form of a racemic mixture, of which only the l-phosphinothricin (L-PPT) gives herbicidal function. Synthesis of optically pure L-PPT by deracemization of D/L-PPT is a promising way to cut down the environmental burden and manufacturing cost. To convert D/L-PPT to L-PPT, we expressed the catalytic enzymes by genomic integration in E. coli. The whole production was implemented in two steps in one pot using four catalytic enzymes, namely d-amino acid oxidase, catalase, glutamate dehydrogenase, and glucose dehydrogenase. Finally, after a series of process optimization, the results showed that with our system the overall L-PPT yield reached 86%. Our study demonstrated a new strategy for L-PPT synthesis, based on enzymes from chromosomal integrated expression, which does not depend on antibiotic selection, and shows a high potential for future industrial application. [ABSTRACT FROM AUTHOR]

ω-Transaminase (ω-TA) is an attractive biocatalyst for stereospecific preparation of amino acids and derivatives, but low catalytic efficiency and unfavorable substrate specificity hamper their industrial application. In this work, to obtain applicable (R)-ω-TA responsible for amination of α-keto acids substrates, the reactivities of eight previously synthesized ω-TAs toward pyruvate using (R)-α-methylbenzylamine ((R)-α-MBA) as amine donor were investigated, and Gibberella zeae TA (GzTA) with the highest (R)-TA activity and stereoselectivity was selected as starting scaffold for engineering. Site-directed mutagenesis around enzymatic active pocket and access tunnel identified three positive mutation sites, S214A, F113L, and V60A. Kinetic analysis synchronously with molecular docking revealed that these mutations afforded desirable alleviation of steric hindrance for pyruvate and α-MBA. Furthermore, the constructed single-, double-, and triple-mutant exhibited varying degrees of improved specificities toward bulkier α-keto acids. Using 2-oxo-2-phenylacetic acid (1d) as substrate, the conversion rate of triple-mutant F113L/V60A/S214A increased by 3.8-fold relative to that of wide-type GzTA. This study provided a practical engineering strategy for improving catalytic efficiency and substrate specificity of (R)-ω-TA. The obtained experience shed light on creating more industrial ω-TAs mutants that can accommodate structurally diverse substrates. [ABSTRACT FROM AUTHOR]

Cordycepin is a major bioactive compound found in Cordyceps sinensis that exhibits a broad spectrum of biological activities. Here a Paecilomyces hepiali OR-1 strain was initially isolated from plateau soil for the bioproduction of cordycepin. Subsequently, strain modification including 60Co γ-ray and ultraviolet irradiation were employed to increase the cordycepin titer, resulted in a high-yield mutant strain P. hepiali ZJB18001 with the cordycepin content of 0.61 mg/gDCW, showing a 2.3-fold to that from the wild strain (0.26 mg/gDCW). Furthermore, medium screening based on Box-Behnken design and the response surface methodology facilitated the enhancement of cordycepin yield to the value of 0.96 mg/gDCW at 25 °C for 5 days in submerged cultivation with an optimized medium composition. The high cordycepin yield, rapid growth rate and stable genetic characteristics of P. hepiali ZJB18001 are beneficial in terms of costs and time for the industrialization of cordycepin production. [ABSTRACT FROM AUTHOR]

Microbial fermentation for enzyme production and then whole-cell catalysis for l-2-aminobutyric acid (l-ABA) production have huge potential for industrial application, but the catalytic capacities of cells are directly related to the fermentation process. Using a 50 L fermenter, the effects of initial glycerol concentration in the medium and rotating speed on cell catalytic capacity were investigated. Fermentation cells showed the best catalytic activity when the initial glycerol concentration was 12 g/L and the rotating speed was 250 rpm. Furthermore, we studied the difference between glycerol and glycerol mixtures as fed-batch media in pH–stat fed-batch fermentation. Results showed that glycerol had better catalytic activity than the glycerol mixture, and the effect of fed-batch fermentation was better than batch fermentation. Meanwhile, the enzyme activities of leucine dehydrogenase and formate dehydrogenase reached 129.87 U/g DCW and 437.02 U/g DCW, respectively, and the intracellular NAD(H) concentration reached 14.94 μmol/g DCW. Using the optimized fermentation parameters, amplified fermentation was then carried out in a 5000 L fermenter to demonstrate the industrial production of l-ABA by Escherichia coli BL21. [ABSTRACT FROM AUTHOR]

To improve the operational stability of glucose isomerase in E. coli TEGI-W139F/V186T, the immobilized cells were prepared with modified diatomite as a carrier and 74.1% activity of free cells was recovered after immobilization. Results showed that the immobilized cells still retained 86.2% of the initial transformational activity after intermittent reused 40 cycles and the yield of D-fructose reached above 42% yield at 60 °C. Moreover, the immobilized cells were employed in the continuous production of High Fructose Corn Syrup (HFCS) in a recirculating packed bed reactor for 603 h at a constant flow rate. It showed that the immobilized cells exhibited good operational stability and the yield of D-fructose retained above 42% within 603 h. The space–time yield of high fructose corn syrup reached 3.84 kg L−1 day−1. The investigation provided an efficient immobilization method for recombinant cells expressing glucose isomerase with higher stability, and the immobilized cells are a promising biocatalyst for HFCS production. [ABSTRACT FROM AUTHOR]

d-amino acid oxidase (DAAO) is widely used in the industrial preparation of l-amino acids, and cultivating Escherichia coli (E. coli) expressing DAAO for the biosynthesis of l-phosphinothricin (l-PPT) is very attractive. At present, the biomass production of DAAO by fermentation is still limited in large-scale industrial applications because the expression of DAAO during the fermentation process inhibits the growth of host cells, which limits higher cell density. In this study, the factors that inhibit the growth of bacterial cells during a 5-L fed-batch fermentation process were explored, and the fermentation process was optimized by co-expressing catalase (CAT), by balancing the biomass and the enzyme activity, and by adding exogenous d-alanine (d-Ala) to relieve the limitation of DAAO on the cells and optimize fermentation. Under optimal conditions, the DO-STAT feeding mode with DO controlled at 30% ± 5% and the addition of 27.5 g/L lactose mixed with 2 g/L d-Ala during induction at 28 °C resulted in the production of 26.03 g dry cell weight (DCW)/L biomass and 390.0 U/g DCW specific activity of DAAO; an increase of 78% and 84%, respectively, compared with the initial fermentation conditions. The fermentation strategy was successfully scale-up to a 5000-L fermenter. [ABSTRACT FROM AUTHOR]

Objective: To solve the bottleneck of plasmid instability during microbial fermentation of l-DOPA with recombinant Escherichia coli expressing heterologous tyrosine phenol lyase. Results: The tyrosine phenol lyase from Fusobacterium nucleatum was constitutively expressed in E. coli and a fed-batch fermentation process with temperature down-shift cultivation was performed. Efficient strategies including replacing the original ampicillin resistance gene, as well as inserting cer site that is active for resolving plasmid multimers were applied. As a result, the plasmid stability was increased. The co-use of cer site on plasmid and kanamycin in culture medium resulted in proportion of plasmid containing cells maintained at 100% after fermentation for 35 h. The specific activity of tyrosine phenol lyase reached 1493 U/g dcw, while the volumetric activity increased from 2943 to 14,408 U/L for l-DOPA biosynthesis. Conclusions: The established strategies for plasmid stability is not only promoted the applicability of the recombinant cells for l-DOPA production, but also provides important guidance for industrial fermentation with improved microbial productivity. [ABSTRACT FROM AUTHOR]

Amphotericin, as an important macrolide antibiotic, is synthesized by Streptomyces nodosus. A high-yield S. nodosus ZJB2016050 was obtained by mutagenesis in our lab with the advantages of high yield, short fermentation cycle and few by-products, which was more suitable for industrial production. The fermentation differences in 50-tons bioreactor between S. nodosus ATCC14899 and S. nodosus ZJB2016050 were compared. The amphotericin B (AmB) yield of S. nodosus ZJB2016050 was 9.73 mg/g at 96 h, which was 30% higher than that of S. nodosus ATCC14899. The by-product amphotericin A (AmA) production of S. nodosus ZJB2016050 was 78% lower than that of S. nodosus ATCC14899. By performing whole-genome sequencing of S. nodosus ZJB2016050 and comparative genome analysis with the wild-type S. nodosus ATCC14899, it was found that the two strains have high synteny, but each has a special gene fragment. The genes functions of fragment were identified in the amino acid transport and metabolism, carbohydrate metabolism and lipid transport and metabolism. The gene functions of SNP (single nucleotide polymorphism) genes were identified in amino acid transport and metabolism, carbohydrate metabolism, coenzyme metabolism and secondary metabolites biosynthesis. The difference in signal-regulation and transcription may be the main reason for the differences between these two strains. Three GntR family egulatory factors of S. nodosus ATCC14899 may reduce the synthesis of amphotericin. Based on the analysis of comparative genomes, the effects of corn oil in S. nodosus ATCC14899 and S. nodosus ZJB2016050 were also compared. The results showed that corn oil can promote the fermentation of S. nodosus ZJB2016050. The S. nodosus ZJB2016050 may degrade fatty acids faster, and the degraded acyl-coenzyme can be used to synthesize amphotericin. [ABSTRACT FROM AUTHOR]

D-pantothenic acid (D-PA), as a crucial vitamin, is widely used in food, animal feed, cosmetics, and pharmaceutical industries. In our previous work, recombinant Escherichia coli W3110 for production of D-PA was constructed through metabolic pathway modification. In this study, to enhance D-PA production, statistical optimization techniques including Plackett–Burman (PB) design and Box-Behnken design (BBD) first were adopted to optimize the culture condition. The results showed that the glucose, β-alanine and (NH4)2SO4 have the most significant effects on D-PA biosynthesis. The response surface model based on BBD predicted that the optimal concentration is glucose 56.0 g/L, β-alanine 2.25 g/L and (NH4)2SO4 11.8 g/L, the D-PA titer increases from 3.2 g/L to 6.73 g/L shake flask fermentation. For the fed-batch fermentation in 5 L fermenter, the isoleucine feeding strategy greatly increased the titer and productivity of D-PA. As a result, titer (31.6 g/L) and productivity (13.2 g/L·d) of D-PA were achieved, they increased by 4.66 times and 2.65 times, respectively, compared with batch culture. At the same time, the accumulation of acetate reduced from 29.79 g/L to 8.55 g/L in the fed-batch fermentation. These results demonstrated that the optimization of medium composition and the cell growth rate are important to increase the concentration of D-PA for microbial fermentation. This work laid the foundation for further research on the application of D-PA microbial synthesis. [ABSTRACT FROM AUTHOR]

Routine approaches for the efficient expression of heterogenous proteins in Pichia pastoris include using the strong methanol-regulated alcohol oxidase (AOX1) promoter and multiple inserts of expression cassettes. To screen the transformants harboring multiple integrations, antibiotic-resistant genes such as the Streptoalloteichus hindustanus bleomycin gene are constructed into expression vectors, given that higher numbers of insertions of antibiotic-resistant genes on the expression vector confer resistance to higher concentrations of the antibiotic for transformants. The antibiotic-resistant genes are normally driven by the strong constitutive translational elongation factor 1a promoter (PTEF1). However, antibiotic-resistant proteins are necessary only for the selection process. Their production during the heterogenous protein expression process may increase the burden in cells, especially for the high-copy strains which harbor multiple copies of the expression cassette of antibiotic-resistant genes. Besides, a high concentration of the expensive antibiotic is required for the selection of multiple inserts because of the effective expression of the antibiotic-resistant gene by the TEF1 promoter. To address these limitations, we replaced the TEF1 promoter with a weaker promoter (PDog2p300) derived from the potential promoter region of 2-deoxyglucose-6-phosphate phosphatase gene for driving the antibiotic-resistant gene expression. Importantly, the PDog2p300 has even lower activity under carbon sources (glycerol and methanol) used for the AOX1 promoter–based production of recombinant proteins compared with glucose that is usually used for the selection process. This strategy has proven to be successful in screening of transformants harboring more than 3 copies of the gene of interest by using plates containing 100 μg/ml of Zeocin. Meanwhile, levels of Zeocin resistance protein were undetectable by immunoblotting in these multiple-copy strains during expression of heterogenous proteins. Key points • PDog2p300was identified as a novel glucose-regulated promoter. • The expression of antibiotic-resistant gene driven by PDog2p300was suppressed during the recombinant protein expression, resulting in reducing the metabolic burden. • The transformants harboring multiple integrations were cost-effectively selected by using the PDog2p300for driving antibiotic-resistant genes. [ABSTRACT FROM AUTHOR]

Objective: O-acetylhomoserine (OAH) is an important platform chemical to produce high-valuable chemicals. To improve the production of O-acetylhomoserine from glycerol, the glycerol-oxidative pathway was investigated and the optimization of fermentation with crude glycerol was carried out. Results: The glycerol-uptake system and glycerol-oxidative pathway were modified and O-acetyltransferase from Corynebacterium glutamicum was introduced into the engineered strain to produce O-acetylhomoserine. It was found that overexpression of glycerol 3-phosphate dehydrogenase improved the OAH production to 6.79 and 4.21 g/L from pure and crude glycerol, respectively. And the higher OAH production depending on higher level of transcription of glpD. Two-step statistical approach was employed to optimize the fermentation conditions. The significant effects of glycerol, ammonium chloride and yeast extract were screened applying Plackett–Burman design and were optimized further by employing the Response Surface Methodology. Under optimized conditions, the OAH production was up to 9.42 and 7.01 g/L when pure and crude glycerol were used in shake flask cultivations, respectively. Conclusions: The enzymatic step catalyzing the oxidation of glycerol through GlpD was the key step for OAH production, which served the foundation for realization of a consistent OAH production from crude glycerol in the future. [ABSTRACT FROM AUTHOR]

Objective: To characterize a recombinant isomerase that can catalyze the isomerization of sucrose into isomaltulose and investigate its application for the enzymatic production of isomaltulose. Results: A sucrose isomerase gene from Erwinia sp. Ejp617 was synthesized and expressed in Escherichia coli BL21(DE3). The enzymatic characterization revealed that the optimal pH and temperature of the purified sucrose isomerase were 6.0 and 40 °C, respectively. The enzyme activity was slightly activated by Mn2+and Mg2+, but partially inhibited by Ca2+, Ba2+, Cu2+, Zn2+ and EDTA. The kinetic parameters of Km and Vmax for sucrose were 69.28 mM and 118.87 U/mg, respectively. The time course showed that 240.9 g/L of isomaltulose was produced from 300 g/L of sucrose, and the yield reached 80.3% after bioreaction for 180 min. Conclusions: This recombinant enzyme showed excellent capability for biotransforming sucrose to isomaltulose at the substrate concentration of 300 g/L. Further investigations should be carried out focusing on selection of suitable heterologous expression system with the aim to improve its expression level. [ABSTRACT FROM AUTHOR]

To develop new cellulases for efficient utilization of the lignocellulose, an endoglucanase (CoCel5A) gene from Colletotrichum orchidophilum was synthesized and a recombinant Pichia pastoris GS115/pPIC9K/cocel5A was constructed for secretory expression of CoCel5A. After purification, the protein CoCel5A was biochemically characterized. The endoglucanase CoCel5A exhibited the optimal activity at 55–75 °C and high thermostability (about 85% residual activity) at the temperature of 55 °C after incubation for 3 h. The highest activity of CoCel5A was detected when 100 mM citric acid buffer (pH 4.0–5.0) was used and excellent pH stability (up to 95% residual activity) was observed after incubation in 100 mM citric acid buffer (pH 3.0–6.0) at 4 °C for 24 h. Carboxymethyl cellulose sodium salt (n = approx. 500) (CMC) and β-d-glucan were the best substrates for CoCel5A among the tested substrates. The kinetic parameters Vmax, Km, and Kcat/Km values against CMC were 290.70 U/mg, 2.65 mg/mL, and 75.67 mL/mg/s, respectively; and 228.31 U/mg, 2.06 mg/mL, and 76.45 mL/mg/s against β-d-glucan, respectively, suggesting that CoCel5A has high affinity and catalytic efficiency. These properties supported the potential application of CoCel5A in biotechnological and environmental fields. [ABSTRACT FROM AUTHOR]

Objective: To explore the optimal methods for the protoplast preparation and regeneration of Hirsutella sinensis by optimizing the limiting factors. Results: During the treatment of enzymatic protoplast preparation, mycelium cultured for 7 days was the optimal start material. The maximum protoplast preparation rate of 4.3 × 107 protoplasts/g fresh weight (FW) was obtained after 0.5 h treatment of 1 mg/ml mixed lytic enzymes in KH2PO4-K2HPO4 buffer (pH 5.5) with 0.6 M KCl at 18 °C. As for the protoplast regeneration, the maximum protoplast regeneration rate reached 12.32% through 5 × 103 protoplasts mL−1 cultivated for 20 days in the regeneration medium with 0.6 M mannitol and 1.5% agar. Conclusions: The preparation and regeneration of H. sinensis protoplasts was firstly established based on process optimization and it provided a foundation for the study of H. sinensis mutagenesis. [ABSTRACT FROM AUTHOR]

Objective: Cloning and secretory expression of an amidase from Kluyvera cryocrescens and characterization of its potential in preparation of chiral amino acids. Results: An amidase belonging to the Ntn-hydrolase superfamily was identified from Kluyvera cryocrescens ZJB-17005 (Kc-Ami). The maximum activity of Kc-Ami was observed at pH 8.5 and 55 °C. Remarkably, Kc-Ami showed an excellent enantioselectivity (99% ee) using rac-4-(hydroxy(methyl)phosphoryl)-2-(2-phenylacetamido) butanoic acid as substrate. Kc-Ami remained stable at pH 7.0–9.0 and exhibited prominent thermostability with a half-life time of 59.1, 47.4 and 20.4 h at 50, 55 and 60 °C, respectively. Kc-Ami could be appllied to synthesize chiral amino acids and its derivatives with excellent enantioselectivity (> 99% ee). The synthesized chiral amino acids could contain short or long side chain, and further the side chain could be replaced with –OH, –COOH or benzene ring. Conclusions: Kc-Ami exhibited remarkable thermostability and excellent enantioselectivity for synthesizing chiral amino acids and its derivatives. This specific characteristic provides great potential for industrial application in preparation of chiral amino acids and its derivatives. [ABSTRACT FROM AUTHOR]

Echinocandin B (ECB) is a key precursor of antifungal agent Anidulafungin, which has demonstrated clinical efficacy in patients with invasive candidiasis. In this study, the effects of microparticle-enhanced cultivation and methyl oleate on echinocandin B fermentation titer were investigated. The results showed that the titer was significantly influenced by the morphological type of mycelium, and mycelium pellet was beneficial to improve the titer of this secondary metabolism. First, different carbon sources were chosen for the fermentation, and methyl oleate achieved the highest echinocandin B titer of 2133 ± 50 mg/L, which was two times higher than that of the mannitol. The study further investigated the metabolic process of the fermentation, and the results showed that L-threonine concentration inside the cell could reach 275 mg/L at 168 h with methyl oleate, about 2.5 times higher than that of the mannitol. Therefore, L-threonine may be a key precursor of echinocandin B. In the end, a new method of adding microparticles for improving the mycelial morphology was used, and the addition of talcum powder (20 g/L, diameter of 45 µm) could make the maximum titer of echinocandin B reach 3148 ± 100 mg/L. [ABSTRACT FROM AUTHOR]

A lipase from Sporisorium reilianum SRZ2 (SRL) with 73% amino acid sequence identity to Candida antarctica lipase B (CALB) was cloned and overexpressed in Pichia pastoris. The recombinant SRL showed a preference for short-chain p-nitrophenyl esters. It achieved maximum activity at pH 8.0 and 65°C for p-nitrophenyl hexanoate (C6) with Km and kcat/Km values of 0.14 mmol·L−1 and 1712 min−1 · mmol · L−1 at 30°C, respectively. SRL displayed excellent thermostability and pH stability, retaining more than 79% of its initial activity after incubation at 60°C for 72 h and 75% at pH 3 to 11 for 72 h. It also maintained most of its activity in the presence of inhibitors and detergents except sodium dodecyl sulfate, and it tolerated organic solvents. SRL was covalently immobilized and successfully used for ethyl hexanoate synthesis in cyclohexane or in a solvent-free system with a high conversion yield (> 95%). Furthermore, high conversion yield was also achieved for the synthesis of various short-chain flavor esters when high substrate concentrations of 2 mol · L−1 were applied. This study indicated that a CALB-type lipase from S. reilianum SRZ2 showed great potential in organic ester synthesis. [ABSTRACT FROM AUTHOR]

The major troubles in 6-(N-hydroxyethyl)-amino-6-deoxy-α-l-sorbofuranose (6NSL) production from N-2-hydroxyethyl glucamine (NHEG) by Gluconobacter oxydans were low cell yield during cell preparation and loss of cells' biocatalytic ability during biotransformation, resulting in high production cost and low 6NSL production. The target of this work was to enhance 6NSL production by reusing cells and improving the cells biocatalytic ability. First, inhibitory effects of substrate and product on 6NSL production, and optimization of cell regeneration condition were investigated, respectively. Then repeated production of 6NSL by immobilized cell using a strategy of in situ exhaustive cell regeneration in a bubble column bioreactor was developed. As a result, the bioprocess underwent nine cycles, the average 6NSL production and conversion rate of NHEG to 6NSL reached 42.6 g L−1 and 83.1% in each batch was achieved, respectively. [ABSTRACT FROM AUTHOR]

R-2-(4-Hydroxyphenoxy)propionic acid (R-HPPA) is a pivotal intermediate for the synthesis of aryloxyphenoxypropionate (APP) herbicide. To rapidly screen microbial isolates with the capacity of hydroxylating R-2-phenoxypropionic acid to R-HPPA from various environmental samples, a convenient and safe 96-well microplate assay method with sodium nitrite (NaNO2) as chromogenic reagent was proposed and optimized. The optimum assay conditions were as follows: the detection wavelength was 420 nm, the concentration of NaNO2 solution was 6.0 g/L, color reaction temperature was 60 °C, the pH of the NaNO2 solution was 2.4, and the reaction time was 40 min. With the aid of this method, screening for microorganisms with C-4-specific hydroxylation activity of R-PPA was conducted. As a result, 23 strains among 3744 single colonies isolated from various samples exhibited the hydroxylation activity. Among these strains, the highest bioconversion rate was achieved by Penicillium oxalicum A5 and Aspergillus versicolor A12, respectively. After 72-h cultivation in shake flask, their conversion rates of R-HPPA from 10 g/L R-PPA reached 21.18% and 40.24%, respectively. The established method was effective in rapid screening of microbes capable of biosynthesizing R-HPPA through hydroxylation of R-PPA, and the obtained two fungi species could be potentially used for R-HPPA production. [ABSTRACT FROM AUTHOR]

Tyrosine phenol-lyase (TPL) is a valuable and cost-effective biocatalyst for the biosynthesis of L-tyrosine and its derivatives, which are valuable intermediates in the pharmaceutical industry. A TPL from Morganella morganii (Mm-TPL) was overexpressed in Escherichia coli and characterized. Mm-TPL was determined as a homotetramer with molecular weight of 52 kDa per subunit. Its optimal temperature and pH for β-elimination of L-tyrosine were 45 °C and pH 8.5, respectively. Mm-TPL manifested strict substrate specificity for the reverse reaction of β-elimination and ortho- and meta-substituted phenols with small steric size were preferred substrates. The enzyme showed excellent catalytic performance for synthesis of L-tyrosine, 3-fluoro-L-tyrosine, and L-DOPA with a yield of 98.1%, 95.1%, and 87.2%, respectively. Furthermore, the fed-batch bioprocess displayed space-time yields of 9.6 g L−1 h−1 for L-tyrosine and 4.2 g L−1 h−1 for 3-fluoro-L-tyrosine with a yield of 67.4 g L−1 and 29.5 g L−1, respectively. These results demonstrated the great potential of Mm-TPL for industrial application. [ABSTRACT FROM AUTHOR]

Transaminase responsible for alienating prochiral ketone compound is applicable to asymmetric synthesis of herbicide L-phosphinothricin (L-PPT). In this work, the covalent immobilization of recombinant transaminase from Citrobacter koseri (CkTA) was investigated on different epoxy resins. Using optimum ES-105 support, a higher immobilized activity was obtained via optimizing immobilization process in terms of enzyme loading, coupling time and initial PLP concentration. Crucially, due to blocking unreacted epoxy groups on support surface with amino acids, the reaction temperature of blocked immobilized biocatalyst was enhanced from 37 to 57 °C. Its thermostability at 57 °C was also found to be superior to that of free CkTA. The Km value was shifted from 36.75 mM of free CkTA to 39.87 mM of blocked immobilized biocatalyst, demonstrating that the affinity of enzyme to the substrate has not been apparently altered. Accordingly, the biocatalyst performed the consecutive synthesis of L-PPT for 11 cycles (yields>91%) with retaining more than 91.13% of the initial activity. The seemingly the highest reusability demonstrates this biocatalyst has prospective for reducing the costs of consecutive synthesis of L-PPT with high conversion. [ABSTRACT FROM AUTHOR]