Search

Using sodium alginate hydrogel as skeleton, in combination with chitosan and magnetic Fe3O4, a new type of magnetic chitosan/sodium alginate gel bead (MCSB) was prepared. Adsorptive removal of Cu(II) from aqueous solutions was studied by using the MCSB as a promising candidate in environmental application. Different kinetics and isotherm models were employed to investigate the adsorption process. Based on Fourier transform infrared spectroscopy, field-emission scanning electron microscope, CHNS/O elements analysis, vibration magnetometer, and various means of characterization, a comprehensive analysis of the adsorption mechanism was conducted. The MCSB had a good magnetic performance with a saturation magnetization of 12.5 emu/g. Elemental analysis proved that the addition of chitosan introduced a considerable amount of nitrogen-rich groups, contributing significantly to copper adsorption onto gel beads. The contact time necessary for adsorption was optimized at 120 min to achieve equilibrium. Experimental data showed that the adsorption process agreed well with the Langmuir isotherm model and the pseudo-second-order kinetics model. The theoretical maximum adsorption capacity of MCSB for Cu(II) could reach as high as 124.53 mg/g. In conclusion, the MCSB in this study is a novel and promising composite adsorbent, which can be applied for practical applications in due course. [ABSTRACT FROM AUTHOR]

Disposal of nitrogen nutrient and excess sludge is a keen concern in wastewater treatment plants. This study describes a simple method of preparing an economical adsorbent, i.e., magnetic excess sludge (MES) by compounding the excess sludge with Fe3O4 nanoparticles. Ammonia-nitrogen removal from simulated wastewater was investigated by using the MES as an adsorbent. The MES had an adsorption efficiency of up to 90% for ammonium removal. Highly efficient separation of adsorbed ammonium on the MES could be magnetically separated from wastewater within 30 s. The operating conditions for ammonium adsorption were optimized at MES dose of 20 g/L, initial ammonium concentration of 45 mg/L and operating temperature of 298-308 K. The equilibrium data of ammonium adsorption on the MES showed a good agreement with the Langmuir isotherm, while the kinetic data were best fitted by the pseudo-second-order model. FTIR analysis indicated that various functional groups, such as hydroxyl and carboxyl groups, existed on the surface of the MES and contributed to the excellent capability for ammonium adsorption. These results suggest that the MES is a promising candidate for removing ammonium from wastewater and recycling excess sludge to ease its disposal at low cost. [ABSTRACT FROM AUTHOR]

Three kinds of functional monomers, 4-vinylpridine(4-VP), 2-(allylthio)nicotinic acid(ANA), and 2-Acetamidoacrylic acid(AAA), were used to synthetize palladium(II) ion-imprinted polymeric nanospheres (Pd(II) IIPs) via precipitation-polymerization method in order to study the effects of different functional monomers on the adsorption properties of ion-imprinted materials. The results of UV spectra in order to study the interaction between template ion PdCl and functional monomers showed that there were great differences in structure after the template reacted with three functional monomers, 4-VP and ANA caused a large structural change, while AAA basically did not change. Further results on the adsorption performance of Pd(II) IIPs on Pd(II) confirmed 4-VP was the most promising candidate for the synthesis of Pd(II) IIPs with an adsorption capacity of 5.042 mg/g as compared with ANA and AAA. The influence of operating parameters on Pd(II) IIP's performance on Pd(II) adsorption was investigated. There was an increase in the adsorption capacity of Pd(II) IIPs at higher pH, temperature, and initial concentration of Pd(II). The results of multi-metal competitive adsorption experiments showed that Pd(II) IIPs had selectivity for Pd(II). An adsorption equilibrium could be reached at 180 min. Kinetic analysis showed that the adsorption test data fitted best to the pseudo-second order kinetic model, and the theoretical equilibrium adsorption capacity was about 5.085 mg/g. The adsorption isotherms of Pd(II) by Pd(II) IIPs agreed well with the Freundlich equation, suggesting a favorable adsorption reaction under optimal conditions. These results showed that Pd(II) IIPs have potential application in the removal of Pd(II) from aqueous solutions and may provide some information for the selection of functional monomers in the preparation of Pd(II) IIPs. [ABSTRACT FROM AUTHOR]

A Pseudomonas putida whole-cell bioreporter for detecting bioavailable copper was constructed by inserting a CueR-regulated sensor element upstream of a promoterless green fluorescent protein (GFP) reporter gene. The constructed bioreporter cells expressed GFP only in response to Cu and Ag when cultivated in different metal salt solutions. M9 supplemented medium provided higher sensitivity compared with LB medium. The optimal test condition was cell suspension with an OD of 0.4-0.5 incubated at 30 °C. The detection range of Cu is 1-70 mg/l under optimal test condition in M9 supplemented medium. [ABSTRACT FROM AUTHOR]

The metalloprotein, CadR, was redesigned to optimize cadmium and mercury specificity of CadR-based E. coli biosensors. By truncating 10 and 21 amino acids from the C-terminal extension of CadR, CadR-TC10 and CadR-TC21 were obtained, respectively. The genes cadR, cadR- TC10 and cadR- TC21 were used as sensing elements to construct green fluorescent protein based E.coli biosensors. Induction at 30 °C for 4 h in supplemented M9 medium was the optimized condition for the biosensor. Compared with CadR-based biosensor, there was a clear decline in induction coefficient for CadR-TC21-based biosensor (decreased by 86 % in Zn(II), 44 % in Hg(II), and only 37 % in Cd(II)). While in CadR-TC10-based biosensor, the induction coefficient decreased by 95 % in Zn(II), 70 % in Hg(II), and 67 % in Cd(II). Improved performances of CadR mutants based E. coli biosensors indicated that truncating C-terminal extension of CadR could improve the specificity. [ABSTRACT FROM AUTHOR]