Search

Data rates in optical fiber networks have increased exponentially over the past decades and core-networks are expected to operate in the peta-bit-per-second regime by 2030. As current single-mode fiber-based transmission systems are reaching their capacity limits, space-division multiplexing has been investigated as a means to increase the per-fiber capacity. Of all space-division multiplexing fibers proposed to date, multi-mode fibers have the highest spatial channel density, as signals traveling in orthogonal fiber modes share the same fiber-core. By combining a high mode-count multi-mode fiber with wideband wavelength-division multiplexing, we report a peta-bit-per-second class transmission demonstration in multi-mode fibers. This was enabled by combining three key technologies: a wideband optical comb-based transmitter to generate highly spectral efficient 64-quadrature-amplitude modulated signals between 1528 nm and 1610 nm wavelength, a broadband mode-multiplexer, based on multi-plane light conversion, and a 15-mode multi-mode fiber with optimized transmission characteristics for wideband operation. Space division multiplexing solutions are one way to increase future fiber information capacity. Here, the authors show peta-bit/s transmission in a standard-diameter, multimode fiber enabled by combining several practical multiplexing technologies. [ABSTRACT FROM AUTHOR]

A Correction to this paper has been published: https://doi.org/10.1038/s41467-021-20944-8. [ABSTRACT FROM AUTHOR]

Lossless linear wave propagation is symmetric in time, a principle which can be used to create time reversed waves. Such waves are special "pre-scattered" spatiotemporal fields, which propagate through a complex medium as if observing a scattering process in reverse, entering the medium as a complicated spatiotemporal field and arriving after propagation as a desired target field, such as a spatiotemporal focus. Time reversed waves have previously been demonstrated for relatively low frequency phenomena such as acoustics, water waves and microwaves. Many attempts have been made to extend these techniques into optics. However, the much higher frequencies of optics make for very different requirements. A fully time reversed wave is a volumetric field with arbitrary amplitude, phase and polarisation at every point in space and time. The creation of such fields has not previously been possible in optics. We demonstrate time reversed optical waves with a device capable of independently controlling all of light's classical degrees of freedom simultaneously. Such a class of ultrafast wavefront shaper is capable of generating a sequence of arbitrary 2D spatial/polarisation wavefronts at a bandwidth limited rate of 4.4 THz. This ability to manipulate the full field of an optical beam could be used to control both linear and nonlinear optical phenomena. Truly arbitrary spatiotemporal wavefront shaping has many potential applications in optics. Here the authors develop a system capable of arbitrary waveshaping to the extent of full time reversal of spatiotemporal optical beams. [ABSTRACT FROM AUTHOR]

Leveraging recent advances in space-division multiplexing, we propose and demonstrate turbulence-resistant free-space optical communication using few-mode (FM) pre-amplified receivers. The rationale for this approach is that a distorted wavefront can be decomposed into a superposition of the fundamental Gaussian mode and high-order modes of a few-mode fiber. We present the noise statistics and the sensitivity of the FM pre-amplified receiver, followed by experimental and numerical comparisons between FM pre-amplified receivers and single-mode (SM) pre-amplified receivers with or without adaptive optics. FM pre-amplified receivers for FSO can achieve high sensitivity, simplicity and reliability. [ABSTRACT FROM AUTHOR]

Exploiting a particular wave property for a particular application necessitates components capable of discriminating in the basis of that property. While spectral or polarisation decomposition can be straightforward, spatial decomposition is inherently more difficult and few options exist regardless of wave type. Fourier decomposition by a lens is a rare simple example of a spatial decomposition of great practical importance and practical simplicity; a two-dimensional decomposition of a beam into its linear momentum components. Yet this is often not the most appropriate spatial basis. Previously, no device existed capable of a two-dimensional decomposition into orbital angular momentum components, or indeed any discrete basis, despite it being a fundamental property in many wave phenomena. We demonstrate an optical device capable of decomposing a beam into a Cartesian grid of identical Gaussian spots each containing a single Laguerre-Gaussian component, using just a spatial light modulator and mirror. Previously, separating Laguerre-Gauss modes of light contained in a single beam required complex setups and could only separate a few modes. Here, the authors demonstrate a simple device capable of spatially decomposing a beam into hundreds of Laguerre-Gaussian components. [ABSTRACT FROM AUTHOR]