Search

Physics of the multiferroic interfaces is currently understood mostly within a phenomenological framework based on screening of the polarization field and depolarizing charges. Additional effects still unexplored are the band dependence of the interfacial charge modulation and the associated changes of the electron-phonon interaction, coupling the charge and lattice degrees of freedom. Here, multiferroic heterostructures of the colossal-magnetoresistance manganite La1-xSrxMnO3 buried under ferroelectric BaTiO3 and PbZrxTi1-xO3 are investigated using soft-X-ray angle-resolved photoemission. The experimental band dispersions from the buried La1-xSrxMnO3 identify coexisting two-dimensional hole and three-dimensional electron charge carriers. The ferroelectric polarization modulates their charge density, affecting the coupling of the 2D holes and 3D electrons with the lattice which forms large Fröhlich polarons inherently reducing mobility of the charge carriers. Our k-resolved results on the orbital occupancy, band filling and electron-lattice interaction in multiferroic oxide heterostructures modulated by the ferroelectric polarization disclose most fundamental physics of these systems needed for further progress of beyond-CMOS ferro-functional electronics. A deeper understanding of the coupling at the interface of multiferroics heterostructures is being achieved by the use of synchrotron radiation techniques. Here, the authors use k-resolved soft X-ray photoemission spectroscopy and first principles calculations to investigate the band structure of several multiferroic heterostructures, isolating the distinct signature of the interface. [ABSTRACT FROM AUTHOR]

As ferroelectric Hf0.5Zr0.5O2 (HZO) thickness scales below 10 nm, the switching characteristics are severely distorted typically showing an antiferroelectric-like behavior (pinched hysteresis) with reduced remanent polarization. Using Landau-Ginsburg-Devonshire (LGD) theory for the analysis of the experimental results, it is shown here that, in thin (5 nm) HZO, depolarization fields drive the system in a stable paraelectric phase coexisting with a metastable ferroelectric one, which explains the pinched hysteresis. This state of matter resembles a first order ferroelectric above the Curie temperature which is known to result in similar double-loop behavior. Here, based on the analysis of experimental data in the framework of LGD theory, it is reported that charge injection and trapping at pre-existing interface defects during field cycling ("wake-up") screens the depolarization field stabilizing ferroelectricity. It is found in particular that a sufficiently large energy density of interface states is beneficial for the recovery of fully open ferroelectric loops. HfO2-based ferroelectric materials have immense technological potential and so significant attention has been given to improve the ferroelectric properties at low-thickness. Here, using Landau Devonshire theory, the authors show the origin of pinched hysteresis loops is connected with the existence of pronounced depolarizing fields which are minimized during field cycling recovering the full ferroelectric loops. [ABSTRACT FROM AUTHOR]

This paper reports the synthesis and characterization of Cu2ZnSnS4 (CZTS) absorber films, prepared by a two-step electrodeposition of a ZnS (zinc sulfide) binary and a CZT (copper, zinc and tin) ternary precursors on Mo/Ti/Si substrates. The as-electrodeposited ZnS/CZT and CZT/ZnS stacks were thermally treated in a tubular furnace in sulfur environment at 550 °C. The role of the ZnS buffer layer is to provide a zinc and sulfur reservoir, needed to complete the formation of kesterite phase. X-ray diffraction and Raman analyses revealed the formation of the CZTS phase. The surface morphology and chemical composition of the films were studied using a scanning electron microscope. The bandgap values inferred from diffuse reflectance data, are discussed with respect to the stoichiometry which is considerably affected by the order of the stacks. Room-temperature photoluminescence of the CZT/ZnS sample showed a board PL band of 1.51 eV. It was found that the film with a ZnS layer on top is preferred for the formation of a Zn-rich single CZTS phase. [ABSTRACT FROM AUTHOR]

Fe (acceptor) and Nb (donor) doped epitaxial Pb(Zr0.2Ti0.8)O3 (PZT) films were grown on single crystal SrTiO3 substrates and their electric properties were compared to those of un-doped PZT layers deposited in similar conditions. All the films were grown from targets produced from high purity precursor oxides and the doping was in the limit of 1% atomic in both cases. The remnant polarization, the coercive field and the potential barriers at electrode interfaces are different, with lowest values for Fe doping and highest values for Nb doping, with un-doped PZT in between. The dielectric constant is larger in the doped films, while the effective density of charge carriers is of the same order of magnitude. An interesting result was obtained from piezoelectric force microscopy (PFM) investigations. It was found that the as-grown Nb-doped PZT has polarization orientated upward, while the Fe-doped PZT has polarization oriented mostly downward. This difference is explained by the change in the conduction type, thus in the sign of the carriers involved in the compensation of the depolarization field during the growth. In the Nb-doped film the majority carriers are electrons, which tend to accumulate to the growing surface, leaving positively charged ions at the interface with the bottom SrRuO3 electrode, thus favouring an upward orientation of polarization. For Fe-doped film the dominant carriers are holes, thus the sign of charges is opposite at the growing surface and the bottom electrode interface, favouring downward orientation of polarization. These findings open the way to obtain p-n ferroelectric homojunctions and suggest that PFM can be used to identify the type of conduction in PZT upon the dominant direction of polarization in the as-grown films. [ABSTRACT FROM AUTHOR]

Cu–Fe–Sn–S have been electrodeposited on indium tin oxide coated glass (ITO/glass) substrates, varying only the deposition time, followed by sulfurization in argon atmosphere at a temperature of 500 °C. X-ray diffraction patterns confirmed the formation of polycrystalline CFTS and other secondary phases. The Raman spectroscopy results confirm the formation of stannite phase, by the existence of the most intense peak at 330 cm−1 corresponding to A-symmetry vibrational mode, while the SnS2 surface phase reduces upon increasing deposition time. The inferred bandgaps by specular transmission are in 1.4–1.7 eV range, influenced by the detected orthorhombic Cu4SnS4 and rhodostannite secondary phases. The electrical measurements confirm the p-type nature of the films, while density of free carriers is relatively high (~ 1019 cm−3), leading to extremely low resistivity in the Ω cm range. [ABSTRACT FROM AUTHOR]

The compensation of the depolarization field in ferroelectric layers requires the presence of a suitable amount of charges able to follow any variation of the ferroelectric polarization. These can be free carriers or charged defects located in the ferroelectric material or free carriers coming from the electrodes. Here we show that a self-doping phenomenon occurs in epitaxial, tetragonal ferroelectric films of Pb(Zr0.2Ti0.8)O3, consisting in generation of point defects (vacancies) acting as donors/acceptors. These are introducing free carriers that partly compensate the depolarization field occurring in the film. It is found that the concentration of the free carriers introduced by self-doping increases with decreasing the thickness of the ferroelectric layer, reaching values of the order of 1026 m-3 for 10 nm thick films. One the other hand, microscopic investigations show that, for thicknesses higher than 50 nm, the 2O/(Ti+Zr+Pb) atomic ratio increases with the thickness of the layers. These results suggest that the ratio between the oxygen and cation vacancies varies with the thickness of the layer in such a way that the net free carrier density is sufficient to efficiently compensate the depolarization field and to preserve the outward direction of the polarization. [ABSTRACT FROM AUTHOR]

Ferroelectric/electric properties of PbZrTiO (PZT) thin films grown by pulsed laser deposition (PLD) on two different substrates, Si (001) and SrTiO (STO) (001), were comparatively analyzed. The structural characterization has revealed the epitaxial relationship between the grown layers and the two types of substrates, with larger density of structural defects for the films deposited on Si (001) with buffer STO layer. The ferroelectric/electric properties are also different, with lower remnant polarization (about half of the value obtained on STO substrate), higher dielectric constant (about two times larger), and lower leakage current (about two orders of magnitude lower) for the PZT films deposited on Si (001) compared to those deposited on (001) STO substrates. Nevertheless, the results show that the use of a STO buffer layer on Si can be a solution to obtain good quality PZT capacitor structures without using expensive single-crystal oxide substrates. In this way, applications based on PZT capacitors (e.g. non-volatile memories, pyroelectric detectors, light switches, etc.) would be more easily integrated directly on Si wafers. [ABSTRACT FROM AUTHOR]

Thin films of SrFeMoO (SFMO) were grown by pulsed laser deposition in non-optimized argon ambient pressures. The films were found to contain a high number of precipitates of foreign phases. The nature and microstructure of these phases were investigated in detail by high-resolution scanning transmission electron microscopy (STEM) and X-ray diffractometry (XRD). We found out that the dominant foreign phase embedded in the SFMO film matrix was SrMoO (SMO). Through STEM and XRD analysis, we determined that the SMO phase grows epitaxially with respect to the surrounding SFMO matrix and has a fairly good crystallinity. Although the SFMO films include many foreign precipitates, they still exhibit good conducting properties and moderate magnetization values. Tuning the growth of the SMO phase on top of SFMO films to obtain a natural tunnel barrier might pave the way for future applications of SFMO in spintronic devices. [ABSTRACT FROM AUTHOR]

The band bending at Cu/PZT(001) interfaces is investigated by X-ray photoelectron spectroscopy (XPS) for a PZT(001) layer which exhibits initial outwards ferroelectric polarization. Two competitive processes are identified: (a) formation of the Schottky barrier between the ferroelectric and unconnected Cu islands, and (b) coalescence of the Cu islands, realisation of an electrical contact to the ground of the system, inducing the apparent loss of the component of the ferroelectric polarization perpendicular to the sample surface, at least as it manifests in band bending. Three mechanisms are proposed to explain this loss of band bending when a full metal layer connected to ground is formed on the surface: (i) over-compensation of depolarization field in the sub-surface region, (ii) formation of domains with in-plane orientation of the polarization vector and (iii) loss of polarization in the near-surface layers of the ferroelectric due to electrons provided by the metal. These result in a non-monotonous variation of binding energies with the amount of Cu deposited. High resolution transmission electron microscopy and piezoresponse force microscopy confirmed these hypotheses. The XPS data allowed also to derive the surface PZT composition, its evolution with the deposition of copper and the formation of surface compounds. [ABSTRACT FROM AUTHOR]

Ferroelectrics are intensively studied materials due to their unique properties with high potential for applications. Despite all efforts devoted to obtain the values of ferroelectric material constants, the problem of the magnitude of static dielectric constant remains unsolved. In this article it is shown that the value of the static dielectric constant at zero electric field and with negligible contribution from the ferroelectric polarization (also called static background dielectric constant, or just background dielectric constant) can be very low (between 10 and 15), possibly converging towards the value in the optical domain. It is also found that the natural state of an ideal, mono-domain, epitaxial ferroelectric is that of full depletion with constant capacitance at voltages outside the switching domain. The findings are based on experimental results obtained from a new custom method designed to measure the capacitance-voltage characteristic in static conditions, as well from Rayleigh analysis. These results have important implications in future analysis of conduction mechanisms in ferroelectrics and theoretical modeling of ferroelectric-based devices. [ABSTRACT FROM AUTHOR]

In this work, the effect of deposition time on the structural and optical properties of ZnO films deposited by Ultrasonic Spray Mist-CVD was studied aiming the application in perovskite solar cells, as holes blocking layer. Crystallinity, surface morphology and optical properties of the ZnO films were investigated by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), conventional and Photoluminescence (PL) spectroscopies, respectively. The XRD measurement proves the existence of the hexagonal wurtzite phase and a high degree of crystallinity with [001] preferential orientation. The SEM study shows that the films possess a compact structure. Smooth and homogenous surface was confirmed also by AFM. The obtained results indicate that ZnO films deposited by a simple, safe and cost-effective method present a great potential for application in perovskite solar cells. [ABSTRACT FROM AUTHOR]

As ferroelectric Hf0.5Zr0.5O2 (HZO) thickness scales below 10 nm, the switching characteristics are severely distorted typically showing an antiferroelectric-like behavior (pinched hysteresis) with reduced remanent polarization. Using Landau-Ginsburg-Devonshire (LGD) theory for the analysis of the experimental results, it is shown here that, in thin (5 nm) HZO, depolarization fields drive the system in a stable paraelectric phase coexisting with a metastable ferroelectric one, which explains the pinched hysteresis. This state of matter resembles a first order ferroelectric above the Curie temperature which is known to result in similar double-loop behavior. Here, based on the analysis of experimental data in the framework of LGD theory, it is reported that charge injection and trapping at pre-existing interface defects during field cycling ("wake-up") screens the depolarization field stabilizing ferroelectricity. It is found in particular that a sufficiently large energy density of interface states is beneficial for the recovery of fully open ferroelectric loops. HfO2-based ferroelectric materials have immense technological potential and so significant attention has been given to improve the ferroelectric properties at low-thickness. Here, using Landau Devonshire theory, the authors show the origin of pinched hysteresis loops is connected with the existence of pronounced depolarizing fields which are minimized during field cycling recovering the full ferroelectric loops. [ABSTRACT FROM AUTHOR]