Search

Rhodococcus equi is a terrestrial bacterium and a common pathogen in foals (Equus caballus), in which causes pneumonia. This report describes for the first time the infection caused by R. equi in a common bottlenose dolphin (Tursiops truncatus) stranded in the Calabrian coast, Italy. The post mortem examination of the animal revealed lesions in lung and colon. The animal was also positive to dolphin morbillivirus. The histological study showed lesions attributable to R. equi infection, such as pyogranulomatous bacterial pneumonia and chronic granulomatous colitis. Whole genome sequencing of the isolated strain confirmed its identification as R. equi. [ABSTRACT FROM AUTHOR]

In this work, we describe the recovery of cellulose acetate (r-CA) polymer from waste cigarette butts (CBs) and their subsequent conversion into feedstock for 3D printing technology. The extraction process for CBs includes two stages: initial washes in water, followed by additional washes in ethanol. A final step involves a dissolution and reprecipitation process, resulting in the creation of a fine powder. The recovery polymer has been analysed and compared to commercial cellulose acetate (p-CA) and unsmoked cigarette filter (u-CA) to assess its purity and examine alterations in its physicochemical properties. The CA powder has also been plasticized with different biocompatible plasticizers to improve the mechanical properties of the CA. We analyze the rheological properties to identify the suitable composition as feedstock for 3D printing. [ABSTRACT FROM AUTHOR]

Leather is one of the most popular products across globe and holds a significant place in the economy, while the pollution, associated to traditional leather industry, is far away on the "green chemistry" principles. In this sense, polyurethanes, which exhibit tunable chemical structures by selecting suitable precursors, can fit specific requirements, and the developments of green strategies make them important candidates for leather industry. This mini review briefly outlines the recent development of conventional (petrol-based) and sustainable polyurethanes in the leather industry, including their design and properties, in applications such as synthetic leather and surface-finishing (coatings/binders). Finally, outlooks of the future tendency, including more environmental-friendly strategies, bio-sourced/recycled materials and development of high-value multifunctional leather materials, are also here proposed. [ABSTRACT FROM AUTHOR]

The production of biodegradable plastics is considered to be a way to reduce plastic waste issue. Among others, oxo-degradant additives enable a faster degradation of plastics in the environment. However, the introduction of these new materials could provoke the release of substances potentially toxic in the environment. This work determined and compared the toxicity of leachates from various additivated polymers (polyethylene, PE; polypropylene, PP; polystyrene, PS) upon different test organisms: plants (Sorghum saccharatum, Lepidium sativum, Sinapis alba, and Vicia faba), crustacean (Daphnia magna), and luminescent bacteria (Vibrio fischeri). Daphnia magna survival was mainly affected by PS and PP leachates (72% and 61% effect, respectively) while PS notably reduced the reproduction rate. On plants, only PP exerted a negative effect (S. saccharatum IG% 32.4), while V. fischeri always showed values around 50%. The data integration, through the Toxicity Test Battery Integrated Index (TBI) approach, allowed to rank the leachates toxicity as PE > PS > PP. This result could be mainly ascribable to the highest metals content in PE since no difference with organic compounds analysis was evidenced. In conclusion, since the polymers exerted dissimilar toxicity, the additive could not be considered the sole responsible of the measured toxicity, but its role in the enhancement of the virgin polymers leachates effects can be solidly hypothesized. [ABSTRACT FROM AUTHOR]

Recently, China became one of the largest nanomaterial markets in the world. The wide use of ZnO nanoparticles in a number of products implies an increasing release in marine environment and consequently the evaluation of the potential effects upon marine organisms largely cultured in China for commercial purposes, such as invertebrate bivalves is a current need. To this aim, survival, bioaccumulation, and transcription pattern of key genes, p53, PDRP, SOD, CAT, and GST, involved in DNA damage/repair and antioxidation, in Mytilus galloprovincialis digestive gland, exposed to ZnO NPs (<100 nm) and ZnO bulk (150-200 nm) for 4 weeks, were evaluated. ZnSO4 was also assessed to appraise the role of zinc ions. Starting from 72 h, increasing mortality values along the exposure time were observed for all ZnO compounds. The highest difference was evident after 28 d when NPs resulted three times more toxic than bulk, (LC50) = 0.78 mg Zn/L (confidence limits: 0.64, 1.00) and 2.62 mg Zn/L (confidence limits: 1.00, 4.00), respectively. For ZnSO4 the (LC50) was always the lowest reaching the minimum value at 28 d 0.25 mg Zn/L (confidence limits: 0.10-0.40). Digestive gland showed higher uptake rate of ionic Zn respect to ZnO NPs and bulk during the first three days of exposure. In particular at the end of the exposure time (28 d) at 1 mg Zn/L the rank of Zn uptake rate was Zinc ion > ZnO NPs > ZnO bulk. The relative expression of investigated genes evidenced that distinct actions of apoptosis and antioxidation occurred in M. galloprovincialis exposed to ZnO NPs with a peculiar pattern dependent on exposure time and concentration. Application of the qRT-PCR technique revealed evidence of sensitivity to the nanomaterial since the first time of exposure. [ABSTRACT FROM AUTHOR]

Zinc oxide nanoparticles (ZnO NPs) are increasingly used in several personal care products, with high potential to be released directly into marine environment with consequent adverse impact on marine biota. This paper aimed to compare the ecotoxicological effect of ZnO NPs (< 100 nm) towards three marine organisms widely used in toxicity assessment: an algal species (Dunaliella tertiolecta), a bioluminescent bacterium (Vibrio fischeri), and a crustacean (Artemia salina). Bulk ZnO (ZnO bulk, 200 nm) and ionic zinc were also investigated for understanding the role of size and of ionic release in the ZnO toxic action. To this aim, different ecotoxicological tests were used: the inhibition of bioluminescence with V. fischeri at three exposure times (5, 15, and 30 min); the D. tertiolecta growth inhibition at 24, 48, and 72 h; the A. salina mortality at 24–96 h, and A. salina mortality and body growth each 3 days along chronic exposure (14 days). For all selected species, ZnO NPs toxicity was strictly dependent on the exposure time and different sensitivities were recorded: ZnO NPs were more toxic towards algae (EC50 2.2 mg Zn/L) but relatively less toxic towards bacteria (EC50 17 mg Zn/L) and crustaceans (EC50 96 h 58 mg Zn/L). During the 14-day chronic exposure of A. salina, ZnO NPs had a significant inhibition of vitality and body length (EC5014d 0.02 mg Zn/L), while the effect of ZnSO4 was not statistically different from the control. ZnO NP toxicity was related to zinc ions and to interactions of particle/aggregates with target organisms and therefore to NP behavior in the testing matrix and to the different testing time exposures. [ABSTRACT FROM AUTHOR]

The design of bioactive scaffold materials able to guide cellular processes involved in new-tissue genesis is key determinant in bone tissue engineering. The aim of this study was the design and characterization of novel multi-phase biomaterials to be processed for the fabrication of 3D porous scaffolds able to provide a temporary biocompatible substrate for mesenchymal stem cells (MSCs) adhesion, proliferation and osteogenic differentiation. The biomaterials were prepared by blending poly(ε-caprolactone) (PCL) with thermoplastic zein (TZ), a thermoplastic material obtained by de novo thermoplasticization of zein. Furthermore, to bioactivate the scaffolds, microparticles of osteoconductive hydroxyapatite (HA) were dispersed within the organic phases. Results demonstrated that materials and formulations strongly affected the micro-structural properties and hydrophilicity of the scaffolds and, therefore, had a pivotal role in guiding cell/scaffold interaction. In particular, if compared to neat PCL, PCL–HA composite and PCL/TZ blend, the three-phase PCL/TZ–HA showed improved MSCs adhesion, proliferation and osteogenic differentiation capability, thus demonstrating potential for bone regeneration. [ABSTRACT FROM AUTHOR]