Search

Purpose: An endoscopic system is needed that presents informative images irrespective of the surgical situation and the number of degrees of freedom in endoscopic manipulation. This goal may be achieved with a virtual reality view for a region of interest from an arbitrary viewpoint. An endoscopic pseudo-viewpoint alternation system for this purpose was developed and tested. Method: Surgical experts and trainees from an endoscopic surgery training course at the minimally invasive surgery training center of Kyushu University were enrolled in a trial of a virtual reality system. The initial viewpoint was positioned to approximate the horizontal view often seen in laparoscopic surgery, with $$20^{\circ }$$ between the optical axis of the endoscope and the task surface. A right-to-left suturing task with right hand, based on a task from the endoscopic surgery training course, was selected for testing. We compared task outcomes with and without use of a new virtual reality-viewing system. Result: There was a 0.37 mm reduction in total error ( $$p = 0.02$$ ) with use of the proposed system. Error reduction was composed of 0.1 mm reduction on the y-axis and 0.27 mm reduction on the x-axis. Experts benefited more than novices from use of the proposed system. Most subjects worked at a pseudo-viewpoint of around 34 $$^\circ $$ . Discussion: Suturing performance improved with the new virtual reality endoscopic display system. Viewpoint alternation resulted in an overview that improved depth perception and allowed subjects to better aim the marker. This suggests the proposed method offers users better visualization and control in endoscopic surgery. [ABSTRACT FROM AUTHOR]

Tetramethyl ammonium hydroxide (TMAOH) has no fluidizing effect on carbon particles, because of their hydrophobic surface properties. On the other hand, styrene/maleic copolymer (SM) enhanced the fluidity of two kinds of carbon slurries in the basic pH range, where the particle diameters of carbon {#}2650 and MA100 were 13 and 22 nm, respectively. High-density sintered bodies of silicon carbide containing carbon and boron carbide as sintering aids were obtained by controlling the pH of ~ 10-11 with TMAOH and by addition of SM: i.e., 9.5 and 5.5 wt% of SM were added to #2650 and MA100, respectively, in the dry weight base of the carbon. The highest sintered density product with more than 98% was obtained by intimate dispersion of the finer carbon particles in the silicon carbide slurries. [ABSTRACT FROM AUTHOR]

Elucidates the optimum preparation conditions for aqueous pigment slurry, such as pH, apparent viscosity and dispersion, as suitable for ink jet printing in application to the decoration of whiteware. Color pigments examined; Adjustment of the pH of the slurries with tetramethyl ammonium hydroxide and nitric acid; Electrokinetic behavior of yellow pigment particles.

Application of a spindle motor using a fluid dynamic bearing (FDB) to hard disk drive (HDD) presents some technical problems. Oil leakage from FDB is one of serious problem that must be solved. In this paper, we discuss a technique used to predict oil leakage from FDB spindle motors based on results of lubrication analysis of FDBs. We conducted oil leakage measurement using FDB spindle motors differing in specifications for FDBs. Then, we analyzed the lubrication in FDBs fitted to the spindle motors used in the measurement. Analysis results were compared with oil leakage measurement results. An analysis result that showed a correlation with the amount of oil leakage was determined as an evaluation item. Use of this evaluation item makes it possible to predict the occurrence of oil leakage with a high accuracy. [ABSTRACT FROM AUTHOR]

With the increase in recording density and data transfer rate of hard disk drive (HDD), fluid dynamic bearing (FDB) motors have been introduced due to their silence and high rotation accuracy. Although lubricant plays a major role in the development of FDB motors, it is extremely difficult to perform thorough evaluation because the quantity of lubricant used in the motor is as small as several micro liters. This paper describes a lubricant evaluation method for FDBs using the time of flight secondary ion mass spectrometry (TOF-SIMS), which enables simultaneous analyses of elements and organic molecules at PPM levels in an extremely small quantity of sample. By using this method, we found that worn metal elements generated both from spindle and bearings have substantial influences on lubricant degradation. [ABSTRACT FROM AUTHOR]

Copyright of BioControl is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The vibration problems relating to living bodies have so far been studied from the perspectives of engineering physiology and psychology. This study shows the relationship between vibratory sensibility and temperature in the living body. Psychological experiments were carried out by using the vibrometer of an acoustic calibration apparatus in sine, triangular and square waves. The sensibility-threshold measurements were made using 30-700 Hz sine waves, 30-300 Hz triangular and sawtooth waves, or 30-250 Hz square waves. Each of ten subjects was kept seated. The average value of the vibratory levels, varied by ascending and descending steps, was taken as that of the threshold. As the vibrometer in the apparatus used makes a noise at frequencies greater than 250 Hz it was masked from the subject by presenting him with a different noise. The threshold curve for square waves is lower by 12·3 dB than that for sine waves at about 30Hz. The threshold curve of the 26°C sine wave was lower by 10 dB than that of the 58°C sine wave vibration near 200 Hz. For example with a sine wave, at 58°C the amplitude threshold was lowest at about 270 Hz, but at −11°C at about 200 Hz. At frequency stimulation higher than 120 Hz, as the temperature of the contact point was lowered, the amplitude threshold increased and the frequency at which the threshold curve was at a minimum shifted to a lower frequency. [ABSTRACT FROM AUTHOR]

Many studies related to human sensation have been made from the viewpoints of engineering, medical science and psychology. The problem of the quantification of sensation is of great importance and cannot be ignored, although only a few papers on this subject have appeared. This paper discusses the relationship between the recognition of shapes and the electromyogram (e.m.g.) generated in the human on the surface of the muscle involved. To observe the e.m.g., the subject was placed inside a shielded room with Ag−AgCl electrodes located at two points on the skin. The two electrodes were spaced 50 mm apart, but variations of the separation in the range 5-7 mm had no effects on the e.m.g. Three spectral peaks (100, 160, 250 Hz) for the response were obtained for each shape (sphere, tetrahedron, cube). The frequencies corresponding with the peak spectral values in the response are the same, and are independent of the forms. Shapes can therefore be characterised by the spectral forms of the forms. [ABSTRACT FROM AUTHOR]

Copyright of Medical & Biological Engineering & Computing is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Medical Electronics & Biological Engineering is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Medical & Biological Engineering (0025696X) is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Fluid-fluid levels were observed in a case of giant cavernous hemangioma on computed tomography (CT) and magnetic resonance (MR) imaging. The fluid-fluid level may be attributed to the separation of blood cells and serous fluid due to the extremely slow flow in cavernous hemangioma of the liver. [ABSTRACT FROM AUTHOR]

Background: Recently, hand skeletal maturity systems such as the Simplified Skeletal Maturity Scale (SSMS) or Thumb Ossification Composite Index (TOCI) have been introduced to attempt to prospectively predict the occurrence of peak height velocity (PHV) in adolescents. This study aims to compare the frequency of the mismatch in estimation of HV between Risser sign (RS) and SSMS/TOCI stages in adolescent idiopathic scoliosis (AIS) patients., Methods: One hundred thirty-three female patients with AIS were included. The mean age of the patients was 13.1 years. A whole spine and hand X-rays were obtained to establish skeletal maturity stage according to RS, SSMS, and TOCI systems. A mismatch resulting in overestimation (MOE) with RS compared to SSMS/TOCI was defined as the combination of RS 3-4/SSMS 3-5 or RS 3-4/TOCI 4-6, whereas a mismatch resulting in underestimation (MUE) with RS and SSMS/TOCI was defined as RS 0-1/SSMS 6-8 or RS 0-1/TOCI 7-8. Height velocity (HV) was compared between MOE/non-MOE and MUE/non-MUE groups., Results: Between RS and SSMS, the rates of the MOE and MUE groups were 4.3% and 1.7%, respectively. Between RS and TOCI, rates were 2.8% and 1.7%, respectively. With the combination of RS and SSMS stages, an estimate of HV of 5.6 cm/year in the MOE group was significantly larger than that of 2.7 cm/year in the non-MOE group, and 3.7 cm/year in the MUE group was significantly smaller than 6.9 cm/year in the non-MUE group. Likewise, with the combination of RS and TOCI stages, an estimate of HV of 5.8 cm/year in the MOE group was significantly greater that of 2.7 cm/year in the non-MOE group, and 3.7 cm/year in the MUE group was significantly smaller than 6.9 cm/year in the non-MUE group., Conclusions: These findings support the use of SSMS/TOCI as the standard for assessing HV and skeletal maturity in patients with AIS., (© 2023. The Author(s), under exclusive licence to Scoliosis Research Society.)