Search

Purpose: Various pathologies of the lumbosacral junction require fusion of the L5/S1 segment. However, pseudarthroses, which often come along with sacral screw loosening, are problematic. The aim of the present investigation was to elaborate the morphological features of the L5/S1 segment to define a so-called "safe zone" for bi- or tricortical screw placement without risking a damage of the iliac vessels. Methods: A total of one hundred computed tomographies of the pelvis were included in this investigation. On axial and sagittal slices, pedicle morphologies, the prevertebral position of the iliac vessels, the spinal canal and the area with the largest bone density were analyzed. Results: Beginning from the entry point of S1-srews iliac vessels were located at an average angle of 7° convergence, the spinal canal at 38°. Bone density was significantly higher centrally with a mean value of 276 Hounsfield Units compared to the area of the Ala ossis sacri. The largest intraosseous screw length could be achieved at an angle of 25°. The average pedicle width was 20 mm and the pedicle height 13 mm. Conclusions: A "safe-zone" for bicortical screw placement at S1 with regard to the course of the iliac vessels could be defined between 7° and 38° convergence. Regarding the area offering the largest bone density and the maximal possible screw length, a convergence of 25° is recommended at S1 to reduce the incidence of screw loosening. Screw diameter, as a further influence factor on screw holding, is limited by pedicle height not pedicle width. [ABSTRACT FROM AUTHOR]

Introduction: Lumbar and lumbosacral spinal fusion is an established procedure for the treatment of degenerative spondylolisthesis. However, the impact of reduction in the affected segment and of improvement in the radiological sagittal parameters on the clinical outcome remains unclear. Purpose of the study is to analyze the correlation between the radiological sagittal parameters and clinical outcome after lumbar spinal fusion in low-grade degenerative spondylolisthesis.Materials and Methods: In a monocentric prospective, clinical study, patients with low-grade degenerative spondylolisthesis of a single lumbar segment have been included. All patients received a lumbar spinal fusion according to the pathology of the treated segment. Patients attended clinical and radiological follow-up examination 1 and 2 years postoperatively. Clinical outcome was assessed using the Core Outcome Measurement Index (COMI), the Oswestry Disability Index (ODI) and the EuroQol 5D. The sagittal spinopelvic radiological parameters, sagittal rotation and anterior displacement of the affected segment and lumbar lordosis were assessed. The correlation between the sagittal radiological parameters and clinical outcome was analyzed using Spearman-Rho bi-serial test.Results: Sixty-two patients (35 female and 27 male) with an average age of 59.3 years were included in the study. All patients completed the follow-up examinations. Significant improvement in COMI, ODI and EuroQol 5D scores was shown in all follow-up examinations. Significant reduction in the anterior displacement was measured postoperatively, which was preserved during the follow-up. However, no correlation could be demonstrated between reduction in anterior displacement and improvement in clinical outcome. Nonetheless, correlation between correction of sagittal rotation and clinical outcome was shown.Conclusions: Reduction in anterior displacement of the affected segment in the surgical treatment of low-grade degenerative spondylolisthesis does not have an impact on the clinical outcome. [ABSTRACT FROM AUTHOR]

Copyright of Der Unfallchirurg is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Der Unfallchirurg is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: The technique of pedicle screw stabilization is finding increasing popularity for use in the cervical spine. Implementing anterior transpedicular screws (ATPS) in cervical spine offers theoretical advantages compared to posterior stabilization. The goal of the current study was the development of a new setting for navigated insertion of ATPS, combining the advantage of reduced invasiveness of an anterior approach with the technical advantages of navigation.Methods: 20 screws were implanted in levels C3 to C6 of four cervical spine models (SAWBONES(®) Cervical Vertebrae with Anterior Ligament) with the use of 3D fluoroscopy navigation system [Arcadis Orbic 3D, Siemens and VectorVision fluoro 3D trauma software (BrainLAB)]. The accuracy of inserted screws was analyzed according to postoperative CT scans and following the modified Gertzbein and Robbins classification.Results: 20 anterior pedicle screws were placed in four human cervical spine models. Of these, eight screws were placed in C3, two screws in C4, six screws in C5, and four screws in C6. 16 of 20 screws (80 %) reached a grade 1 level of accuracy according to the modified Gertzbein and Robbins Classification. Three screws (15 %) were grade 2, and one screw (5 %) was grade 3. Grade 4 and 5 positions were not evident. Summing grades 1 and 2 together as "good" positions, 95 % of the screws achieved this level. Only a single screw did not fulfill these criteria.Conclusion: The setting introduced in this study for navigated insertion of ATPS into cervical spine bone models is well implemented and shows excellent results, with an accuracy of 95 % (Gertzbein and Robbins grade 2 or better). Thus, this preliminary study represents a prelude to larger studies with larger case numbers on human specimens. [ABSTRACT FROM AUTHOR]

Ignicoccus hospitalis, a hyperthermophilic, chemolithoautotrophic Crenarchaeon, is the host of Nanoarchaeum equitans. Together, they form an intimate association, the first among Archaea. Membranes are of fundamental importance for the interaction of I. hospitalis and N. equitans, as they harbour the proteins necessary for the transport of macromolecules like lipids, amino acids, and cofactors between these organisms. Here, we investigated the protein inventory of I. hospitalis cells, and were able to identify 20 proteins in total. Experimental evidence and predictions let us conclude that 11 are soluble cytosolic proteins, eight membrane or membrane-associated proteins, and a single one extracellular. The quantitatively dominating proteins in the cytoplasm (peroxiredoxin; thermosome) antagonize oxidative and temperature stress which I. hospitalis cells are exposed to at optimal growth conditions. Three abundant membrane protein complexes are found: the major protein of the outer membrane, which might protect the cell against the hostile environment, forms oligomeric complexes with pores of unknown selectivity; two other complexes of the cytoplasmic membrane, the hydrogenase and the ATP synthase, play a key role in energy production and conversion. [ABSTRACT FROM AUTHOR]