Search

In this work, the photocatalytic properties of thin films based on titanium oxides for application on flexible glass in photovoltaic panels were presented. Thin films were prepared by gas impulse magnetron sputtering (GIMS), where the gas injection on a target was synchronized in time with the electric pulse supplying the magnetron with the Ti target. The deposition process was carried out under various Ar/O2 atmospheres (with a content of 5–8% O2). The as-deposited TiOx films were non-stoichiometric. The influence of deposition parameters on optical properties, microstructure, hardness, and elastic modulus was examined. In addition, the dependence between the oxygen content in the sputtering atmosphere and the photocatalytic activity of the coatings was examined. The scratch resistance of the coatings and their adhesion to flexible glass were also investigated. It has been shown that the GIMS technique can be used for efficient deposition of non-stoichiometric TiOx coatings on substrates sensitive to the temperature as thin flexible glass and, at the same time, characterized by high adhesion. The TiOx-based semiconductor coatings prepared in this study can be used successfully in transparent electronics and in the construction of modern photovoltaic panels due to their photocatalytic activity, high hardness, and high level of transparency. [ABSTRACT FROM AUTHOR]

The paper presents an innovative method of solving the problem of vibration suppression during milling of large-size details. It consists in searching for the best conditions for clamping the workpiece based on a rapid modal identification of the dominant natural frequencies only and requires repetitive changes in the tightening torque of the clamping screws. Then, by estimating the minimum work of the cutting forces acting in the direction of the width of the cutting layer, it is possible to predict the best fixing of the workpiece. Application of the method does not require the creation and identification of a computational model of the process or preliminary numerical simulations. The effectiveness of this method was confirmed by the evaluation of the Root Mean Square (RMS) of the vibration level in the time domain observed during the actual face milling process. The worst results were obtained for the configuration of supports tightened with a torque of 90–110 Nm, and the best—with a torque of 50 Nm. [ABSTRACT FROM AUTHOR]

Dual-energy X-ray imaging has a vast range of application in security. Luggage inspection is an essential process for an airplane or court house security as well as securing mass events. An image of a content of some package may help to figure out if there is any dangerous object inside and avoid possibly threatening situation. As the raw X-ray images are not always easy to analyze and interpret, some image processing methods like an object detection, a frequency resolution increase or a pseudocoloring are being used. Since color can be a powerful tool to improve the usefulness of an information display, we propose pseudocoloring improvement by modifying material-based approach with edge detection to fill and sharpen color layers over the image making it easier to read and analyze. We demonstrate the effectiveness of the methods using real data, acquired from a professional dual-energy X-ray scanner. [ABSTRACT FROM AUTHOR]

Electrical and optical properties of TiO:Pd thin films deposited from Ti-Pd mosaic targets sputtered in reactive oxygen plasma have been studied. The properties were investigated for thin films with the Pd amount of 5.5 at. %, 8.4 at. % and 23 at. %. Based on resistivity measurements a drop from 10 down to almost 10Ωcm has been recorded when the Pd amount was varied from 5.5 at. % to 23 at. %, respectively. Moreover, it was shown that doping with different amounts of Pd results in the possibility of obtaining both types of electrical conduction: n-type for the TiO with 5.5 at. % and 8.4 at. % of Pd and p-type for the TiO with 23 at. % of Pd thin films. From optical measurements it has been found that as the Pd amount was increased the transmission through the thin films was reduced and position of the fundamental absorption edge was shifted toward a longer wavelength range of up to 600 nm. The optical band gap was calculated for direct and indirect transitions from optical absorption spectra. Structural properties were characterized by X-ray diffraction (XRD) and atomic force microscopy (AFM). The XRD patterns displayed occurrence of the crystalline, TiO-rutile for lower Pd amounts (5.5 at. %, 8.4 at. %), while the TiO:Pd (23 at. %) thin films displayed XRD-amorphous behaviour. Images obtained from AFM displayed dense, nanocrystalline structure with homogenous distribution of crystallites. Additionally performed secondary ion mass spectroscopy investigation confirmed homogenous distribution of Pd in the whole thickness of the prepared thin films. [ABSTRACT FROM AUTHOR]