Search

Background: Comminuted fractures of the coronoid process significantly compromise the stability and function of the elbow joint. Reconstruction of the coronoid process with a prosthesis has been suggested as an alternative to restore the architecture. The purpose of this study was to investigate the strength and stability of various methods for the fixation of a coronoid prosthesis by finite element analysis.Materials and Methods: A coronoid prosthesis was designed based on the morphological information from computed tomography images acquired from 64 subjects in whom the top 40% of the coronoid process height was replaced. Four methods for the fixation of the prosthesis were suggested: (1) a double 2.0-mm fixation bolt, anterior to posterior; (2) a double 2.5-mm fixation bolt, anterior to posterior; (3) a single 4.0-mm fixation bolt, posterior to anterior; (4) a single 4.5-mm fixation bolt, posterior to anterior. The integrated prosthesis-bone constructs were analyzed via the finite element analysis of 10 simulated proximal ulna models with loading applied along the axis of the humerus and with three different elbow flexion angles (30°, 90°, and 130°). The maximum principal stress and the total deformation were quantified and compared.Results: A coronoid prosthesis was developed. The maximum principal stress of the fixation bolts occurred around the neck of the fixation bolt. For a comparison of the strengths of the four fixation methods, the maximum principal stress was the lowest for fixation using a single 4.5-mm fixation bolt. The value of the maximum principal stress significantly decreased with increased elbow flexion angle for all fixation methods. The maximum deformation of the fixation bolts occurred at the head of the fixation bolt. For a comparison of the maximum deformations in the four fixation methods, the maximum deformation was the lowest for fixation using a single 4.5-mm fixation bolt. The value of the maximum deformation significantly decreased with increased elbow flexion angle for all fixation methods.Conclusions: The present study suggested that fixation of a coronoid prosthesis with a single 4.5-mm fixation bolt from posterior to anterior is an excellent option in terms of the strength and stability. Level of Evidence Experimental study. [ABSTRACT FROM AUTHOR]

Purpose: The primary intent of total knee arthroplasty is the restoration of normal knee kinematics, with ligamentous constraint being a key influential factor. Displacement of the joint line may lead to alterations in ligament attachment sites relative to knee flexion axis and variance of ligamentous constraints on tibiofemoral movement. This study aimed to investigate collaterals strains and tibiofemoral kinematics with different joint line levels.Methods: A previously validated knee model was employed to analyse the change in length of the collateral ligaments and tibiofemoral motion during knee flexion. The models shifted the joint line by 3 and 5 mm both proximally and distally from the anatomical level. The data were captured from full extension to flexion 135°.Results: The elevated joint line revealed a relative increase in distance between ligament attachments for both collateral ligaments in comparison with the anatomical model. Also, tibiofemoral movement decreased with an elevation in the joint line. Conversely, lowering the joint line led to a significant decrease in distance between ligament attachments, but greater tibiofemoral motion.Conclusion: Elevation of the joint line would strengthen the capacity of collateral ligaments for knee motion constraint, whereas a distally shifted joint line might have the advantage of improving tibiofemoral movement by slackening the collaterals. It implies that surgeons can appropriately change the joint line position in accordance with patient's requirement or collateral tensions. A lowered joint line level may improve knee kinematics, whereas joint line elevation could be useful to maintain knee stability.Level Of Evidence: V. [ABSTRACT FROM AUTHOR]

Purpose: Actions requiring deep knee flexion, such as kneeling and squatting, are challenging to perform after total knee replacement (TKR), though many manufactures emphasize that their knee prostheses could safely achieve high flexion. Little is known about the patellofemoral kinematics during deep flexion. This study aimed to track the movement of the patella during kneeling and squatting through dynamic computational simulation. Methods: A validated knee model was used to analyse the patellar kinematics after TKR, including shifting, tilting and rotation. The data were captured from full extension to 135° of knee flexion. For kneeling, an anterior force of 500 N was applied perpendicularly on the tibial tubercle as the knee flexed from 90° to 135°. For squatting, a ground reaction force was applied through the tibia from full extension to 135° of flexion. Results: This study found that patellar shifting and rotation in kneeling were similar to those while squatting. However, during kneeling, the patella had a greater medial tilt and showed signs of abrupt patellar tilt owning to an external force being concentrated on the tibial tubercle. Conclusions: In terms of squatting and kneeling movements, the latter is a more strenuous action for the patellofemoral joint after TKR due to the high forces acting on the tibial tubercle. It is suggested that overweight patients or those requiring high flexion should try to avoid kneeling to reduce the risk of the polyethylene wear. Further modification of trochlear geometry may be required to accommodate abrupt changes in patellar tilting. Level of evidence: II. [ABSTRACT FROM AUTHOR]

Purpose: Implantation of prosthetic tibio-femoral components in hyperextension is a well-established and effective procedure, but whether prosthetic orientation in the sagittal plane has any effects on the postoperative kinematics remains unclear. The purpose of this study is to explore how the aforementioned hyperextension affects knee kinematics.Methods: Validated computational dynamic TKA models were established. Based on representative literatures and actual operation specifications, femoral and tibial components were assembled with 0° or 5° of hyperextension. Dynamic data, including the timing of cam-post engagement, anterioposterior femoral translation and tibial axial rotation coupling with knee flexion, were recorded for analysis.Results: 5° of femoral component hyperextension delayed cam-post engagement by an angle of 2°. Nevertheless, a 5° posterior slope of the tibial component resulted in a 38° delay in engagement. Comparing this with the femoral component at the same angle of hyperextension, the tibial component could more evidently assist in the prevention of paradoxical femoral anterior translation and the promotion of tibial internal rotation through early flexion.Conclusion: Tibio-femoral components in hyperextension did significantly alter postoperative kinematics, especially for the tibial component. These results suggest that the degree of tibial posterior slope cutting should be more highly scrutinized intraoperatively.Level Of Evidence: II. [ABSTRACT FROM AUTHOR]