Search

The delignification of sugarcane straw (SCS) was investigated using 1-ethyl-3-methylimidazolium acetate, [Emim][OAc], varying three process parameters such as temperature, residence time, and stirring rate. The maximum degree of delignification was around 63.9% at 90 °C for a stirring rate of 1400 rpm and a residence time of 5 h. The 23 full factorial statistical model was well-fitted with the experimental results. Among the 26 solid-liquid reaction mechanisms studied in this study, Zhuravlev, Lesokhin, and Templeman diffusion (i.e., shrinking core/product layer) model was found to be the most suitable model for describing the delignification mechanism of SCS using [Emim][OAc]. When compared with other process parameters, higher temperatures produced low crystalline and low thermally stable recovered cellulose-rich material with high porosity and BET surface area due to higher degree of crystalline cellulose I to amorphous cellulose II transformation. The recovered lignin was of low molecular structure with high content of phenolic OH− groups and syringyl units. The recovery of [Emim][OAc] was > 85% with no structural changes. [ABSTRACT FROM AUTHOR]

The current work focuses on the comparison of renewable choline cation-based ionic liquids (ILs) with imidazolium cation-based ILs for their delignification performance. Choline cation-based ILs removed a higher percentage of lignin (78.1–83.7% vs. 51.4–64.5%) and hemicellulose (64.7–72.8% vs. 7.1–29.9%) from sugarcane straw pre-treatment compared to imidazolium cation-based ILs. This was mainly attributed to the presence of fewer alkyl group and extra –OH group in choline cation. In general, ILs pre-treatment significantly increased the volatile matter and reduced fixed carbon in regenerated cellulose-rich material. Higher content of cellulose and higher crystallinity in the case of choline-based ILs enhanced the production of furfural and levoglucosenone from the pyrolysis of regenerated cellulose rich material. On the contrary, the presence of higher content of amorphous cellulose from imidazolium-based ILs, particularly 1-ethyl-3-methylimidazolium acetate produced γ-butyrolactone. Therefore, ILs pre-treatment can be favourable for the selective production of platform chemicals via pyrolysis route. [ABSTRACT FROM AUTHOR]

The biosolids management is becoming an increased concern for the wastewater sector in recent times due to production of large volume of biosolids, their higher processing costs and the presence of emerging contaminants. The pyrolysis of biosolids is gaining significant interest in the industry sector as well as research community over the last decade due to its ability to reduce biosolids volume, produce high-value biochar product and minimise the risk associated with contaminants. This paper aims to critically review the literature on biosolids management techniques and their current challenges, biosolids characteristics and its suitability for pyrolysis, pyrolysis product characterisation from different reactor designs and biochar application as a soil amendment, adsorbent and catalyst. The efforts have also been made to critically summarise studies on the process modelling activities and techno-economic assessments including some key pilot-scale demonstrations of recent time. The review concludes that biosolids to biochar can be an effective alternative to biosolids management; however, its commercial viability is limited in the current scenario. In the end, efforts have been made to highlight current challenges including research gaps and future perspectives in improving its commercial viability. [ABSTRACT FROM AUTHOR]

With the aim of separating cellulose-rich material from river red gum, it was pre-treated with three ionic liquids (ILs), i.e. 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]), 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) and 1-butyl-3-methylimidazolium acetate ([Bmim][OAc]) as well as with two organic solvents, i.e. methanol and ethanol. All ILs and organic solvents were able to remove more than 20% lignin. The [Emim][OAc] was found to be the most effective IL in removing lignin (i.e. 26.2 wt% lignin was removed) amongst all pre-treatment studies. Noticeable structural differences were observed in the cellulose-rich materials obtained from IL and organic solvent pre-treatments and several analytical instruments such as XRD, FTIR, TGA and SEM were employed for their detailed understandings. ILs, in contrast to organic solvents, produced porous and low crystalline cellulose-rich material. This was believed to be due to the transformation of crystalline cellulose I to amorphous cellulose II during IL pre-treatment. The exciting findings of producing high porosity and low crystallinity cellulose-rich material along with the removal of lignin using IL treatment have the potential to transform the future bio-processing and bio-refining industry. More than 80% IL recovery was achieved in this investigation. A minor structural alteration was observed in the recovered [Bmim][Cl] while no structural change was observed in the recovered [Emim][OAc] and [Bmim][OAc], and this was confirmed by FTIR spectroscopic analyses. This establishes the recyclability and reusability of ILs in the cost effective pre-treatment of biomass. [ABSTRACT FROM AUTHOR]