Search

Additive manufacturing (AM) technologies have demonstrated a promising material efficiency potential in comparison to traditional material removal processes. A new directed energy deposition (DED) category AM process called wire arc additive manufacturing (WAAM) is evolving due to its benefits which include faster build rates, capacity to build large volumes, and inexpensive feedstock materials and machine tools compared to more technologically mature powder-based AM technologies. However, WAAM products present challenges like poor surface finish and lower dimensional accuracy compared to powder-based processes or machined parts, prevalence of thermal distortions, residual stresses, and defects like porosity, cracks, and humping, often requiring post-processing operations like finish machining and heat treatment. These post-processing operations add to the production cost and environmental footprint of WAAM-built parts. Therefore, considering the opportunities and challenges presented by WAAM, this paper analyses the environmental impact, production costs, and mechanical properties of WAAM parts and compares them with those achieved by laser powder bed fusion (LPBF) and traditional computer numerical control (CNC) milling. A high-strength low-alloy steel (ER70S) mechanical part with medium complexity was fabricated using WAAM. Based on the data collected during this experiment, environmental impact and cost models were built using life cycle assessment and life cycle costing methodologies. WAAM was observed to be the most environmentally friendly option due to its superior material efficacy than CNC milling and has a better energy efficiency than LPBF. Also, WAAM was the most cost-friendly option when adopted in batch production for batch sizes above 3. The environmental and cost potential of WAAM is amplified when used for manufacturing large products, resulting in significant material, emission, and cost savings. The fabricated WAAM part demonstrated good mechanical properties comparable to that of cast/forged material. The methodology and experimental data presented in this study can be used to calculate environmental impacts and costs for other products and can be helpful to manufacturers in selecting the most ecofriendly and cost-efficient manufacturing process. [ABSTRACT FROM AUTHOR]

The traditional method of manufacturing propellant tanks for rockets and spaceships involves significant amounts of forging, and machining, making it expensive and environmentally unfriendly. A novel approach for manufacturing propellant tanks that reduces the need for machining and friction stir welding processes has been presented in this paper. This approach involves manufacturing a tank half starting from a single metal plate, using innovative and advanced metal forming processes such as hot stretch forming, magnetic pulse forming, hub forming, and integrated stiffened cylinder (ISC) flow forming followed by orbital welding of two tank halves. A life cycle assessment (LCA) study was conducted in accordance with ISO 14044:2006 standard using the ReCiPe 2016 Midpoint (H) method to compare the environmental impacts of the traditional and newly developed approaches for manufacturing propellant tanks. The results of the LCA study showed that the new approach based on advanced forming technologies reduced carbon footprint by 40%, cumulative energy demand by 35%, water footprint by 17%, and materials waste by 4% compared to traditional manufacturing. The lower environmental impact of the new approach was attributed to a decrease in friction stir welding requirements due to the implementation of advanced forming techniques that enable integrated tank production. This lowered the overall energy consumption in the novel approach by a factor of 1.5 and in turn resulted in lower environmental impact compared to traditional forging and machining-based method. Furthermore, a futuristic scenario that involves in-house tank production using the novel approach with minimal transportation of inventories was also simulated. Based on the LCA results, it was seen that the newly developed approach for manufacturing propellant tanks was more environmentally friendly than the traditional approach and its environmental footprint could be further reduced by implementing the futuristic scenario with minimal transportation. This novel approach is also expected to reduce the lead time and production cost of manufacturing a propellant tank. Hence, future efforts in cost assessment and further optimization of raw material and energy usage are recommended. [ABSTRACT FROM AUTHOR]

The ocean thermal energy conversion (OTEC) systems, as renewable energy-based power plants, have the potential to play a significant role in meeting future electricity demands due to the vast expanse of the world's oceans. These systems employ the temperature difference between surface ocean waters and deep ocean waters to drive a thermodynamic cycle and produce electricity. The temperature of deep ocean waters, approximately 1000 m below the surface, is approximately 4 °C, while surface ocean temperatures typically range between 20 and 30 °C. The generated power of OTEC systems is dependent on these temperature differences and may vary with changes in surface ocean temperatures. In this study, the main focus is to find the impact of temperature variation on the failure rates of OTEC system components and the generated power output of these plants. The findings indicate that as the demand for the power system increases, its reliability decreases. In order to improve the reliability of the power system, the integration of a new generation unit, such as the close cycle OTEC power plant under investigation, could be necessary. The findings also indicate the importance of considering temperature variation in the evaluation of the reliability of such types of power plants based on renewable energy. [ABSTRACT FROM AUTHOR]