Search

The term gruitbeer is used to describe an alcoholic beverage, which in some aspects was similar to beer. It was produced during the Middle Ages in the Lowlands (until about the 1600 s). Its characteristic attribute was the gruit substance, which was used in its production. The most widely accepted theory states that gruit was a mixture of spices, analogous to hops, which served only to impart sensory characteristics. However, gruit may have served to enhance the fermentation process and was essential for obtaining proper beer. It may have been a mixture of spices, wort, and grain shells. The role of grain shells may have been to provide fermentative organisms. The purpose of this research was to evaluate the possibility of obtaining beer by spontaneous fermentation methods, using a recreated version of gruit substance. For this purpose, a historical recipe was used, from which a malt "porridge" was obtained. The porridge was enriched with spices which could have been historically used, along with wheat or barley grains. The grains were used to be a source of microflora. The prepared gruit substance was added to the 8.3% (w/w) beer wort, yielding a wort extract of 11.3–11.6% (w/w) (depending on the variant), and a fermentation process was conducted. The resulting beers contained 4.29–4.63% (v/v) of alcohol and had a relatively low pH level (3.42–3.55). The results indicate that the examined approach could have been applied in the historical production of the gruit beer. [ABSTRACT FROM AUTHOR]

The aim of the paper was to determine the potential of using grape pulp, marc and must in the beer production process. Samples were fermented using non-Saccharomyces yeasts (Dekkera bruxellensis 3429, Metschnikowia pulcherrima MG970690), while Saccharomyces cerevisiae Safale US-05 was used as a control. Grape marc was obtained by pressing grape must. The grape marc, must and pulp were pasteurized and, together with wort, volumetrically introduced into fermentation flasks for fermentation. Mass changes taking place during the process were analyzed. Real extract, alcohol content, free amino nitrogen (FAN) content, titratable acidity, pH, color, organic acid profile and content of sugars were determined in obtained beers. The addition of grape marc, must and pulp increased the value of most of the tested parameters. It did not adversely affect the fermentation process. This offers the possibility of using grape marc, must and pulp in the brewing industry, even with the use of non-Saccharomyces yeast monocultures. [ABSTRACT FROM AUTHOR]

The aim of the paper was to determine the potential of using grape must and unconventional yeasts in the beer production process. Samples were fermented using non-Saccharomyces yeasts (Dekkera bruxellensis 3429, Wickerhamomyces anomalus MG971261, Kluyveromyces lactis MG971263), and Saccharomyces cerevisiae Safale US-05 was used as a control. Grape must was pasteurized and, together with wort, volumetrically introduced into fermentation flasks for fermentation. Mass changes taking place during the process were analyzed. Real extract, alcohol content, free amino nitrogen (FAN) content, titratable acidity, color, and sugar profile were determined in obtained beers. The obtained results have proven that the tested non-Saccharomyces yeasts can adapt to fermentation conditions, just like S. cerevisiae Safale US-05, and can be used to produce beer-wine hybrid alcoholic beverages. The yeast K. lactis MG971263 produced a greater amount of alcohol in beers compared to other yeast strains. There were no significant differences in the color of the obtained beers and in the degree of FAN utilization during the fermentation process. The unconventional yeasts used are capable of producing beers without and with the addition of grape must with parameters similar to beers obtained using S. cerevisiae Safale US-05. [ABSTRACT FROM AUTHOR]

The aim of the paper was to determine potential of using grape pulp, marc and must in the beer production process. Samples were fermented using non-Saccharomyces yeasts (Dekkera bruxellensis 3429, Metschnikowia pulcherrima MG970690) and Saccharomyces cerevisiae Safale US-05 was used as a control. Grape marc was obtained by pressing grape must with a press. Subsequently, the grape marc, must and pulp were pasteurized and, together with wort, volumetrically introduced into fermentation flasks for fermentation. Mass changes taking place during the process were analyzed. Real extract, alcohol, free amino nitrogen (FAN) content, pH, color, sugars and organic acid profile were determined in obtained beers. The research has shown that the yeasts Dekkera bruxellensis 3429 fermented similarly to Saccharomyces cerevisiae Safale US-05. The yeast D. bruxellensis 3429 produced more alcohol in the finished beers in most cases and assimilated more FAN than M. pulcherrima MG970690. The D. bruxellensis 3429 strain most effectively used L-malic acid. [ABSTRACT FROM AUTHOR]

Beer has been enjoyed by consumers for years. Today, hops are inextricably associated with this beverage. Although they have been the subject of research for decades, knowledge of their bittering components and interactions during the beer production process is still incomplete. Current literature clearly indicates that the bitterness experienced in beer comes from a much wider range of compounds than just iso-α-acids. Although compounds that can be classified into β-acids, humulinones, hulupones, hard resins, and polyphenols are characterized by lower levels of bitterness and are present in hops in lower quantities than α-acids, they might determine, together with them, the final level of bitterness in beer. Unlike α-acids, the influence of compounds from these groups, their transformations, changes in their content during the beer production process and factors that affect their final concentration in beer have not yet been thoroughly studied. In case of α-acids, it is known that factors, such as chemical composition of wort, its extract and pH, amount of hops added and α-acids' content, boiling time, and temperature at which hops were added influence the level of bitterness. This phenomenon is further complicated when dry hopping is used. Due to the presence of humulinones, polyphenols, and α-acids, a relatively simple spectrophotometric determination of IBU can give erroneous results. IBU determination, especially in dry-hopped beers, should be coupled with HPLC analysis, taking into account appropriate bitterness coefficients. [ABSTRACT FROM AUTHOR]

The paper discusses the influence of the oak chips addition on physicochemical properties of beer. The research material consisted of wort and beer after the fermentation, brewed in the English porter style. Medium toasted oak chips, from two varieties of an oak tree (French and American), were used. Variants without the addition of oak chips were used as control samples. The research was conducted for three periods: after 18 days, 2, and 3 months. The samples containing oak chips were characterized by higher fermentation efficiency, compared to beers without the addition of chips. Titratable acidity increased with aging time in beers containing the chips. Alcohol content decreased after 3 months in all samples. Increased amounts of oak chips and aging time, resulted in greater free amino nitrogen utilization. Prolonging the storage time of the beer with the addition of oak chips changed the profile of volatile components in the beverages. [ABSTRACT FROM AUTHOR]

Biodiversity of native yeasts, especially in winemaking, has hidden potential. In order to use the value of non-Saccharomyces strains in wine production and to minimise the possibility of its deterioration, it is necessary to thoroughly study the yeast cultures present on grape fruits and in grape must, as well as their metabolic properties. The aim of the study was to characterise the yeast microbiota found during spontaneous fermentation of grape musts obtained from grape varieties 'Rondo', 'Regent' and 'Johanniter'. Grapes from two vineyards (Srebrna Góra and Zadora) located in southern Poland were used for the research. Succession of subsequent groups of yeasts was observed during the process. Metschnikowia pulcherrima yeasts were identified both at the beginning and the end of the process. Hanseniaspora uvarum, Wickerhamomyces onychis and Torulaspora delbrueckii strains were also identified during the fermentation. Torulaspora delbrueckii and Wickerhamomyces onychis strains were identified only in grape musts obtained from grapes of the Zadora vineyard. These strains may be characteristic of this vineyard and shape the identity of wines formed in it. Our research has provided specific knowledge on the biodiversity of yeast cultures on grapes and during their spontaneous fermentation. The research results presented indicate the possibility of using native strains for fermentation of grape musts, allowing to obtain a product with favourable chemical composition and sensory profile. [ABSTRACT FROM AUTHOR]

The aim of the study was the physicochemical characterization of wines produced using indigenous yeasts isolated from spontaneously fermented grape musts, obtained from cold climate grapes. Saccharomyces cerevisiae MH020215 and Nakawazaea ishiwadae MG971259 yeast strains were used in this study. The musts obtained from white and red grapes of Johanniter and regent varieties were used as a fermentation raw material. In the produced wines, content of ethyl alcohol, total extract, sugars, free amino nitrogen was analyzed, along with determination of total and volatile acidity and volatile compounds profile. Additionally, organoleptic evaluation was performed. Wines obtained with native S. cerevisiae MH020215 strains were characterized with more favorable enological properties. Synthesis of desirable volatile compounds, especially esters, contributed to the creation of desirable aromatic profile of those wines. Moreover, those beverages contained higher levels of carbonyl compounds (especially acetaldehyde) and lower methanol content. Wines obtained using N. ishiwadae MG971259 cultures were represented by high total acidity level and substantial fusel alcohol content (mainly butanol, propanol), which resulted in an unfavorable sensory profile of the product. [ABSTRACT FROM AUTHOR]

The international competitiveness of the wine sector and consumer demands for the unique wine styles pose challenges in improving the fermentation process. The basis of proper alcoholic fermentation is knowledge about how individual yeast strains interact with the aroma, taste and color of wine, what results in possibility to select species used as starter cultures. To use the value of non-Saccharomyces yeast strains in wine production and to minimize the possibility of wine deterioration, it is necessary to precisely recognize the yeast cultures present on the fruit of the vine and in grape must, as well as their metabolic properties. The aim of the study was to determine the oenological properties of yeasts isolated from spontaneously fermented grape musts obtained from cool climate grapes. For this purpose, Zweigelt grape must was fermented with yeast monocultures. Alcohol, extract, sugars, glycerol, total acidity and free amine nitrogen were analyzed in the obtained wines. Poor fermentation properties of yeast strains results in obtaining wines with relatively large amounts of residual sugars and low alcohol. A decrease in overall acidity was noted in sets with the participation of M. pulcherrima MG971264, while in other tests the opposite trend was observed. Although some microorganisms have the ability to assimilate organic acids found in wine, they are not able to carry out fermentation or they do it inefficiently. Solution to this problem may, therefore, be use of mixed cultures of noble and non-Saccharomyces yeast, what effectively reduce the concentration of organic acids, while not adversely affecting the organoleptic characteristics of the drink. [ABSTRACT FROM AUTHOR]

In brewing industry, adjuncts may replace malt, but they may also represent a raw material for brewing beer demonstrating different, specific organoleptic qualities. Triticale grain may give good quality malts, characterised by high extraction capacity, high diastatic power and short saccharification time. The purpose of the research was to determine the impact of triticale malt application on physiochemical composition and profile of volatile compounds in beer. In fermented wort, the content of ethyl alcohol, extract, sugars, general acidity, colour, haze, free aminonitrogen and volatile compound profile (GC-SPME) was determined. Beers produced from the triticale malt or with use of a malt mixture were characterised by higher acidity and lower ethyl acetate butanol and isoamyl alcohol. The worts analysed in the process demonstrated parameters normative for pale malts. The triticale malt may be an alternative for barley malt. [ABSTRACT FROM AUTHOR]