Search

Copyright of Arthroskopie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: The Latarjet procedure is traditionally used to treat chronic anterior shoulder instability associated with glenoid bone loss. However, few series have analyzed outcomes in a female-only population. The objective of this study was to evaluate the clinical and radiological outcomes of a Latarjet bone block in this specific population. Methods: This single-center retrospective study included 15 women (mean age 35 ± 11.3; 19–60) reviewed with a minimum follow-up of 2 years. The procedure was performed using the open bone block screw technique (n = 7) or by arthroscopy with cortical button (n = 8). Clinical evaluation was based on active range of motion measurements, Rowe and Walch–Duplay scores, and subjective shoulder value (SSV). Radiographic analysis explored bone block healing at the last follow-up. Results: At a mean follow-up of 48 months (32–86), no recurrence was reported. The mean Rowe score was 91 points (70–100), Walch–Duplay 90 points (60–100), and SSV 87% (70–100). The active mobilities reached 169° (± 9°) in elevation, 57° (± 15°) in external rotation at side, and 89° (± 6°) in abduction. The return-to-sport rate was 91%. Five patients experienced persistent anterior pain, with screws requiring hardware removal in 2 (p = 0.02). Radiological assessment detected one case of nonunion (7%). Conclusion: Women treated with the Latarjet procedure experienced satisfactory midterm clinical outcomes. The arthroscopic technique using cortical button fixation seems to avoid residual anterior pain requiring hardware removal. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this systematic review is to report complications, graft failure, fixation methods, rehabilitation protocol, clinical and patient-reported outcomes, and return to sports with the use of quadriceps tendon graft with the bone block (QT-B) and without bone block (QT-S). Methods: According to the PRISMA guidelines a comprehensive search was performed across PubMed/MEDLINE, Scopus, EMBASE, and Cochrane Library databases from inception until April 2022. Only prospective studies using quadriceps tendon autograft with a minimum of 20 patients were considered for inclusion. The outcome measures extracted from the studies were the KT-1000, Lysholm score, Subjective and Objective IKDC, Tegner, Marx Score, complications, failures and/or revision surgery, and rate of return to sports. Cochrane risk of bias and MINORS tool were used for the risk of bias assessment of all included studies. Results: A total of 13 studies were included, consisting of 5 randomized controlled trials, 6 cohort studies, 1 case–control and 1 case series. A total of 484 patients received QT-S in 6 studies of which 224 (46.2%) were males and 212 (43.8%) females with a mean age of 21.5 ± 7.5 (range 14–58). While 243 patients received QT-B in 7 studies of which 167 (68.7%) were males and 76 (31.3%) females with a mean age of 28.9 ± 4.5 (range: 18–49). The studies analyzed had a mean MINORS score of 14.6 (range, 12–19). Both QT-B and QT-S for ACL reconstruction reported satisfactory results in terms of patient-reported outcome measures. Although, a slightly higher anterior laxity was found with the QT-S than with the QT-B. Conclusion: Quadriceps tendon with a bone block (QT-B) or without bone block (QT-S) for ACL reconstruction is supported by current literature. Both grafts are safe and viable options for ACL reconstruction with comparable clinical outcomes, complications and revision rates. Level of evidence: Level IV. Registration: PROSPERO-CRD42022347134; https://www.crd.york.ac.uk/prospero/ [ABSTRACT FROM AUTHOR]

Copyright of Obere Extremitat is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: In terms of a highly atrophic maxilla, bone augmentation still remains very challenging. With the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) for allogeneic bone blocks, a new method for the treatment of bone deficiencies was created. This case report demonstrates the successful use of two specially designed and CAD/CAM manufactured allogeneic bone blocks for a full arch reconstruction of a highly atrophic maxilla with an all-on-six concept. Case presentation: We report the case of a 55-year-old male patient with a highly atrophic maxilla and severe bone volume deficiencies in horizontal and vertical lines. In order to treat the defects, the surgeon decided to use a combination of two allogeneic bone blocks and two sinus floor augmentations. The bone blocks were fabricated from the data of a cone beam computed tomography (CBCT) using CAD/CAM technology. After the insertion of the two bone blocks and a healing period of 7 months, six dental implants were placed in terms of an all-on-six concept. The loading of the implants took place after an additional healing time of 7 months with a screw-retained prosthetic construction and with a milled titanium framework with acrylic veneers. Conclusion: The presented procedure shows the importance of the precise design of CAD/CAM manufactured allogeneic bone blocks for the successful treatment of a highly atrophic maxilla. Proper soft-tissue management is one of the key factors to apply this method successfully. [ABSTRACT FROM AUTHOR]

Purpose: Glenoid augmentation using free bone blocks for anterior shoulder instability has been proposed as an alternative to or bail-out for the Latarjet procedure. The purpose of this investigation was to systematically review and compare outcomes of patients undergoing glenoid augmentation using free bone block autografts versus allografts.Methods: A systematic review using PubMed, MEDLINE, Embase, and the Cochrane Library databases was performed in line with the PRISMA statement. Studies reporting outcomes of patients treated with free bone block procedures for anterior shoulder instability with minimum 2-year follow-up were included. Random effects modelling was used to compare patient-reported outcomes, return to sports, recurrent instability, non-instability related complications, and development of arthritis between free bone block autografts and allografts.Results: Eighteen studies comprising of 623 patients met the inclusion criteria for this investigation. There were six studies reporting on the use of allografts (of these, two used distal tibial, three iliac crest, and one femoral head allograft) in 173 patients and twelve studies utilizing autografts (of these, ten used iliac crest and two used free coracoid autograft) in 450 patients. Mean age was 28.7 ± 4.1 years for the allograft group and 27.8 ± 3.8 years for the autograft group (n.s). Mean follow-up was 98 months in autograft studies and 50.8 months for allograft studies (range 24-444 months, n.s). Overall mean increase in Rowe score was 56.2 with comparable increases between autografts and allografts (n.s). Pooled recurrent instability rates were 3% (95% CI, 1-7%; I2 = 77%) and did not differ between the groups (n.s). Arthritic progression was evident in 11% of autografts (95% CI, 2-27%; I2 = 90%) and 1% (95% CI, 0-8%; I2 = 63%) of allografts (n.s). The overall incidence of non-instability related complications was 5% (95% CI, 2-10%; I2 = 81%) and was similar between the groups (n.s). Pooled return to sports rate was 88% (95% CI, 76-96%; I2 = 76%).Conclusion: Glenoid augmentation using free bone block autograft or allograft in the setting of recurrent anterior shoulder instability with glenoid bone loss is effective and safe. Outcomes and complication incidence using autografts and allografts were comparable. Due to the high degree of heterogeneity in the data and outcomes reported in available studies, which consist primarily of retrospective case series, future prospective trials investigating long-term outcomes using free bone block autograft versus allograft for anterior shoulder instability with glenoid bone loss are warranted.Level Of Evidence: IV. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to evaluate the union rate and risk factors for delayed union in the early postoperative period after an arthroscopic Latarjet with double-button fixation.Method: In a retrospective study, postoperative CT scans at 3 months were analysed following an arthroscopic Latarjet with double-button fixation used to treat anterior shoulder instability. Healing of the bone block, its position in the sagittal and coronal planes, and the contact area graft/scapula were analysed.Results: Ninety-eight CT scans (98 patients) were included. The rate of healing at 3 months was 63/98 (64%) and four grafts clearly migrated. The position was perfectly flush to the glenoid rim in 67% and under the equator in 96%. The mean contact graft/scapula area was 135 mm 2 (4-420). In multivariate analysis, the risk of non-union at 3 months was associated with tobacco consumption (p = 0.001, aOR = 12.17 95% CI [2.62-56.49]), absence of preoperative glenoid bone defect (p = 0.003, aOR = 8.06 95% CI [2.06-31.56]), and a contact area graft/scapula less than 120 mm 2 (p = 0.010, aOR = 5.25 95% CI [1.50-18.40]). Among 31 non-united grafts, 93% definitively healed on CT scan at 1 year, leaving an overall rate of 93% of united grafts at last follow-up.Conclusions: The rate of union at 3 months after an arthroscopic Latarjet with double-button fixation was 64%, reaching 93% at 1 year. This procedure should be carefully indicated in case of tobacco use or instability without glenoid bone defect, especially when the shoulder is exposed to high-energy trauma in the early phase after surgery. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to compare outcomes of arthroscopic tricortical iliac crest autograft and allograft bone blocks for recurrent traumatic anterior shoulder instability in terms of bone resorption, union and recurrent instability and assess which one is a better graft choice. Patients and methods: Twenty-two consecutive patients treated for recurrent traumatic anterior shoulder instability that required reconstruction with bone block were included in the study. Surgical reconstruction was carried out arthroscopically with contoured tricortical iliac crest autograft or allograft. At follow-up, patients were assessed for Oxford Shoulder Instability Score (OSIS), recurrent dislocation, apprehension testing, complications, and 3-dimensional computed tomography (CT) for resorption and union rate at a mean of 10.89 months. Results: There were 10 patients in the allograft group with a median age of 27.7 years and a mean follow-up of 26.6 months. In the autograft group, there were 12 patients with a median age of 29 years and a mean follow-up of 28.7 months. The OSIS increased in both groups but was significantly higher in the autograft group (54.1 vs 48.2, p = 0.02). There were 2 failures in each group but no hardware complications. Allograft had higher resorption rate in comparison (75% in allograft vs 40% in autograft) and higher non-union rate (62.5% in allograft vs 16.5% in autograft). Conclusion: This study demonstrated that both tricortical iliac crest autograft and allograft can improve shoulder instability symptoms. However, the results suggest that autograft may lead to significantly improved instability score, higher union rate and less bone resorption. Level of evidence: IV, retrospective study. [ABSTRACT FROM AUTHOR]

Introduction: The coracoid block technique described by Latarjet was modified by Patte and Walch in order to increase the glenoid surface. Saragaglia further modified this technique and described a minimally invasive approach which allows faster post-operative recovery. The aim of this study was to evaluate the medium-term functional and radiological results of this technique.Methods: This is a single surgeon cohort of 40 shoulders in 38 patients (32 men, 6 women) with an average age of 34.5 years operated on between January and December 2014. The skin incision was 3 to 6 cm long allowing the bony block to be passed under the subscapularis tendon without sectioning it and to be placed in lying position. The bone block was fixed with a 6.5 cancellous screw or a 7.0 cannulated screw.Results: At an average follow-up of 48 months, there were no recurrent dislocations. The average WOSI score was 42, the average Constant score was 95 corrected to 97% and the average SSV was 97. Visual analogue scores were 0 at rest and 0.6 with activity. The bone block healed in 92.5% of cases. It was flush with the edge of the glenoid in 84% of cases, lateralised in 10% and medialised in 6% of cases. Mean internal rotation power was 12 kg in the operated shoulder compared with 9 kg in the non-operated shoulder.Conclusion: The treatment of recurrent anterior shoulder instability by mini invasive Latarjet gives excellent medium-term functional results. The rate of recurrent dislocation in this series was zero and internal rotation power was well preserved. This is an excellent alternative to arthroscopic procedures which are yet to demonstrate their superiority over open surgery. [ABSTRACT FROM AUTHOR]

An environmentally friendly method of osteoplastic material production is proposed for reconstructive surgery needs based on treatment of xenogeneic bone matrix with supercritical carbon dioxide. The method provides the best extraction of lipids and fatlike substances at minimum cost of extracting agent and processing time; it allows the significant reduction of costs and facilitates the manufacture of surgical implants. The advantages of the obtained material in comparison with the known commercial analogue are demonstrated by in vitro experiments on the cellular model. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study was to correlate the bone block graft position, its dimension, its reabsorption and its integration with clinical outcome in patients operated on for recurrent anterior shoulder instability.Methods: Twenty-four patients affected by recurrent anterior shoulder dislocation and operated on using the Latarjet procedure were enrolled in this study. At 6 and 24 months, patients were evaluated with the following scales: ROWE, WOSI, Oxford instability score, UCLA, DASH and Constant score. Patients underwent two postoperative CT scans: immediately after surgery (T0) and at 24 months post-op (T1).Results: At 24 months, none of the 24 patients reported further episodes of dislocation. Clinically at the final follow-up, we found excellent results in all the evaluation scales. Mean reduction in bone graft from T0 to T1 was 42% of the overall volume; similarly reduction in the overall surface was 29.3%; decrease in length, width and depth was, respectively, 3.4, 2.2 and 1.0 mm; all these parameters decreased significantly (p < 0.05). No correlations were found between radiological parameters and clinical and functional outcomes.Conclusions: The results confirm that a lack of integration or a significant reabsorption of the graft is present in the Latarjet procedure, but they do not significantly affect the clinical and functional results. [ABSTRACT FROM AUTHOR]

Purpose: Posterior shoulder dislocation is often associated with bone defects. Surgical treatment is often necessary to address these lesions. The aim of the present systematic review was to analyse the available literature concerning bone block procedures in the treatment of bone deficiencies following posterior dislocation. In addition, the methodology of the articles has been evaluated through the Coleman methodology score.Methods: A systematic review of the literature was performed using the keywords "posterior shoulder instability", "posterior shoulder dislocation", "bone loss", "bone defect", "bone block", and "bone graft" with no limit regarding the year of publication. All English-language articles were evaluated using the Coleman methodology score.Results: Fifty-four articles were identified, and 13 articles met inclusion criteria. The initial cohort included 208 shoulders, and 182 were reviewed at an average follow-up of 72.7 months (±55.2). The average Coleman score was 57.2 (±8.0). The most lacking domains were the size of study population, the type of study, and the procedure for assessing outcomes. All the articles showed an increase in the outcome scores. Radiographic evaluation revealed degenerative changes such as osteoarthritis and graft lysis in most of the series.Conclusions: This review confirms the lack of studies with good methodological quality. However, bone grafting is a reliable option since significant improvement in all scores is reported. Although a low incidence of recurrence is generally described, there are concerns that the results may deteriorate over time as evidenced by graft lysis and glenohumeral osteoarthritis in up to one-third of patients.Level Of Evidence: Systematic review, Level IV. [ABSTRACT FROM AUTHOR]

Recurrent anterior instability of the glenohumeral joint has long been an arduous problem to solve surgically, owing to its difficulty to the need to restore both osseous and dynamic constraints in the unstable shoulder. Biomechanical studies have indicated that glenoid bone loss shortens the safe arc through which the glenoid can resist axial forces; in these cases, a soft tissue repair alone may be insufficient to maintain stability. Clinical studies have confirmed that major bone loss is associated with an unfavourable outcome. The benefits of using arthroscopic procedures for surgical stabilization of the shoulder include smaller incisions and less soft tissue dissection, better access for repair and, potentially, the maximum respect for the undamaged anatomical structures. The biggest disadvantage of arthroscopic procedures until recently was the inability to successfully treat a significant bone defect. Over the last 10 years, several new arthroscopic techniques have been developed, providing new surgical options for successfully treating soft tissues and bony lesions in anterior-inferior glenohumeral instability. Level of evidence V. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study was to analyse the learning curve and complication rate of the open Latarjet procedure.Methods: The first 68 Latarjet procedures performed by a single surgeon for chronic anterior shoulder instability were reviewed retrospectively. The standard open surgical technique was followed faithfully during each procedure. Post-operative complications were taken from patient medical records. Post-operative evaluation consisted of clinical and radiological assessments.Results: The rate of early (<3 months) clinical complications was 7.4 % (5.9 % haematoma, 1.5 % neurological deficit), and the delayed complication rate was 7.3 %. Early complication rate, duration of surgery (mean 65 min; 35-135) and hospital stay (mean 3 days; 1-4) were significantly reduced as experience increased (respectively; P = 0.03, ρ = - 0.3; P = 0.009, ρ = - 0.3; P < 0.0001, ρ = - 0.6). On the radiographs, the bone block was healed and in perfect position in 87 % of cases, with no effect of surgical experience (P = 0.3, ρ = 0.1). The rate of complications on radiographs was 17 %: 11 % partial lysis, 2 % complete lysis and 4 % non-union. No recurrence of instability was found after an average follow-up of 21 months.Conclusion: Despite a high rate of post-operative complications, the morbidity of Latarjet procedure remains low. A surgeon's experience significantly affects the surgery duration and the occurrence of early complications. The main radiological complication is partial lysis of the bone block. After a short learning curve, the clinical outcomes of the Latarjet procedure appear to be satisfactory and reproducible.Level Of Evidence: IV. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of the study is to identify the safe zone in which the surgeon can place the screws for fixation of the coracoid graft during the Latarjet procedure to avoid injuries of the suprascapular nerve with the shoulder in internal and external rotation. Methods: The dissection on twelve fresh-frozen shoulders was performed according to a standard posterior approach to the gleno-humeral joint. The suprascapular nerve and its branches for the infraspinatus muscle were identified at the spinoglenoid notch region. Then, the distance between the glenoid and the suprascapular nerve at the spinoglenoid notch region was measured by using a ruler with the shoulder at 90° internal rotation and at 90° of external rotation. Results: The median distance between the glenoid and the suprascapular nerve was 12 mm (range 6-15 mm) with the shoulder at 90° of internal rotation and 19 mm (range 11-23 mm) with the shoulder at 90° of external rotation. The distance between the glenoid and the suprascapular nerve was statistically significantly greater with the shoulder at 90° of external rotation than 90° of internal rotation ( P = 0.002). Conclusions: The suprascapular nerve is furthest away from the glenoid with the shoulder at 90° of external rotation. Therefore, the placement of screws in external rotation of the humerus during glenoid bone block procedures likely reduces the risk of iatrogenic injuries of the suprascapular nerve. [ABSTRACT FROM AUTHOR]

Copyright of Obere Extremitat is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: The purpose of the study was to determine the biomechanical status of the different components of the Latarjet procedure. The anterior capsule reconstruction with the transferred coracoacromial ligament (CAL) and the necessity of an intact subscapularis tendon were of particular interest. We hypothesized that the anterior capsule reconstruction will have a significant effect and that the Latarjet procedure will lose its stabilizing effect if the subscapularis tendon is torn. Methods: Stability testing of 12 human shoulder specimens was performed. After testing of the intact joint, a combined anterior glenoid and capsule defect was set arthroscopically. Then the Latarjet procedure was performed using an open approach and tested with and without loading of the conjoint tendons (10 N). Afterwards, the specimens were distributed into two groups and the Latarjet technique was reduced stepwise: dissection of the CAL, dissection of the conjoint tendons (group A); reduction of the coracoid segment, dissection of the subscapularis tendon (group B). Biomechanical testing was performed for each condition in two positions: 60° of glenohumeral abduction with neutral rotation and with 60° of external rotation; each with a passive humerus load of 30 N in the anterior, inferior and anteroinferior direction. Results: The Latarjet technique with load applied to the conjoint tendons significantly reduced translation compared with the defect condition for all tested positions in all directions. In group A, the CAL-dissection led to a significant increase of anterior translation (+5.0 mm, p = 0.003) and inferior translation (+7.3 mm, p = 0.025) in neutral rotation and of anterior translation in 60° of external rotation (+4.4 mm, p = 0.034). In group B, the reduction of the coracoid bone down to the coracoid tip resulted in a significant increase of only the anterior translation in abduction and 60° of external rotation (+4.5 mm, p = 0.05). In contrast, the detachment of the subscapularis tendon led to a significant increase of translation in all testing positions except the inferior direction in the neutral rotation. Conclusions: We found the anterior capsule reconstruction to represent a significant contribution to the stabilizing effect of the Latarjet procedure, whereas a deficiency of the subscapularis tendon eliminates its effect. Clinical relevance: We recommend to perform the Latarjet technique with an anterior capsule reconstruction (e.g. CAL transfer) and with a transfer of the coracoid bone block rather than a transposition of the coracoid tip. Furthermore, we were able to show that an intact subscapularis tendon is a necessary prerequisite for a reliable stabilization. [ABSTRACT FROM AUTHOR]

The purpose of this study is twofold: to present an arthroscopic method for treating anterior–inferior glenohumeral instability, and to evaluate its feasibility in a cadaveric model. This arthroscopic technique was performed in ten fresh frozen cadaver shoulder specimens. Quality of the results following the procedure were evaluated subjectively by assessing how the bone block graft was placed respect glenoid rim. We also evaluated adjacent axillary nerve and the neuro-vascular structures medial to the coracoid. We had six ‘good’ results, two ‘fair’ results, and two ‘poor’ results. The present study indicates that an anterior bone graft procedure for treating anterior bone defects of the glenoid in anterior inferior shoulder instability can be successfully performed. The worst results occurred during our first five procedures, suggesting a learning curve. However, the learning curve doesn’t appear to be steep, as the good results gained in the last five procedures confirm. [ABSTRACT FROM AUTHOR]

Current techniques for tibial graft fixation in four tunnels double bundle (DB) anterior cruciate ligament (ACL) reconstruction are by means of two interference screws or by extracortical fixation with a variety of different implants. We introduce a new alternative tibial graft fixation technique for four tunnels DB ACL reconstruction without hardware. About 3.5 to 5.5 cm bone cylinder with a diameter of 7 mm is harvested from the anteromedial (and posterolateral) tibial bone tunnel (s) with a core reamer. The anteromedial (AM) and posterolateral (PL) hamstring tendon grafts (or alternatively tendon allografts) are looped over an extracortical femoral fixation device and cut in length according to the total femorotibial bone tunnel length. The distal 3 cm of each, the AM- and PL bundle graft are armed with two strong No. 2 nonresorbable sutures and the four suture ends of each graft are tied to each other over the 2 cm wide cortical bone bridge between the tibial AM and PL bone tunnel. In addition the AM- and/or PL bone block which was harvested at the beginning of the procedure is re-impacted into the two tibial bone tunnels. A dorsal splint is used for the first two postoperative weeks and physiotherapy is started the second postoperative day. The technique is applicable for four tunnels DB ACL reconstruction in patients with good tibial bone quality. The strong fixation technique preserves important tibial bone stock and avoids the use of tibial hardware which knows disadvantages. It does increase tendon to bone contact and tendon-to-bone healing and does reduce implant costs to those of a single bundle (SB) ACL reconstruction. Revision surgery may be facilitated significantly but the technique should not be used when bony defects are present. In case of insufficient bone bridge fixation or bone blocks hardware fixation can be applied as usual. [ABSTRACT FROM AUTHOR]