Search

Studying the impregnation and distribution of oil-based preservative in dried wood is complicated as wood is a nonhomogeneous, hygroscopic and porous material, and especially of anisotropic nature. However, this study is important since it has influence on the durability of wood. To enhance the durability of thermally modified wood, a new method for preservative impregnation is introduced, avoiding the need for external pressure or vacuum. This article presents a study on preservative distribution in thermally treated Scots pine ( Pinus sylvestris L.) and Norway spruce ( Picea abies (L.) Karst.) sapwood using computed tomography scanning, light microscopy, and scanning electron microscopy. Secondary treatment of thermally modified wood was performed on a laboratory scale by impregnation with two types of preservatives, viz. Elit Träskydd (Beckers) and pine tar (tar), to evaluate their distribution in the wood cells. Preservative solutions were impregnated in the wood using a simple and effective method. Samples were preheated to 170 °C in a drying oven and immediately submerged in preservative solutions for simultaneous impregnation and cooling. Tar penetration was found higher than Beckers, and their distribution decreased with increasing sample length. Owing to some anatomical properties, uptake of preservatives was low in spruce. Besides, dry-induced interstitial spaces, which are proven important flow paths for seasoned wood, were not observed in this species. [ABSTRACT FROM AUTHOR]

Scots pine ( Pinus sylvestris L.) sapwood was impregnated with aqueous solutions of phenol formaldehyde and methylated melamine formaldehyde resins and subsequently cured in an oven. One set of specimens was cured in plastic bags to avoid drying (wet curing) while another set of samples was heated and water was allowed to freely evaporate (dry curing). Macroscopic resin distribution was investigated using X-ray densitometry and infrared spectroscopy (FTIR-ATR). During dry curing, the resins migrated to the wood surface resulting in a gradient. Wet curing resulted in even distribution of the resins because it was immobilized due to condensation and precipitation in the wood. Neither densitometry nor FTIR-ATR was found to be generally applicable for investigating resin distribution in modified wood. Wet curing resulted in low cell wall bulking as compared to dry curing, probably because resin precipitated before drying. Storing impregnated wood prior to curing under non-drying conditions ('diffusion phase') also reduced cell wall penetration and bulking. [ABSTRACT FROM AUTHOR]

Abstract  Scots pine sapwood (Pinus sylvestris L.) and Douglas fir heartwood (Pseudotsuga menziesii Franco) specimens were exposed in double layer field trials at 23 different European test sites under different exposure conditions (in total 27 test sets). The material climate in terms of wood moisture content (MC) and wood temperature was automatically monitored over a period of up to 7 years and compared with the progress of decay. The overall aim of this study was to establish dose–response relationships between climate factors and decay as a basis for the service life prediction of wood. The “Scheffer Climate Index” based on weather data collected at official meteorological stations at the different test sites poorly correlated with the corresponding decay progress and was therefore not a suitable tool for estimating site-specific decay potential. In contrast, the use of the combined material climatic parameters MC and wood temperature led to a feasible dose–response function and turned out to be a useful basis for service life prediction of wood. [ABSTRACT FROM AUTHOR]