Search

The tight oil/gas reservoirs in China have showed the great exploration prospects and high production potential, with the characteristics of low porosity, low permeability, and significant heterogeneity in formation rocks. It remains a challenge to sort out the relations between reservoir wave responses and rock physical properties, and the further studies on the wave response patterns of tight reservoirs are in an urgent demand. The shear modulus and S- (shear) wave attenuation of rocks are affected by the properties of pore fluid and confining pressure. The ultrasonic wave experiments are performed on eight partially-saturated tight sandstone samples at different confining pressures, and we estimate S-wave attenuation with the spectral-ratio method. Results show that S-wave attenuation decreases with increasing confining pressure, and the water saturation case shows more loss compared to the oil saturation case, while the gas saturation case gives the lowest attenuation. We observe the S-wave relaxation peak at an intermediate water saturation for the gas-water partial-saturation case in general. S-wave attenuation increases with increasing porosity or permeability. Based on the measured rock physical properties, and combined with the Voigt–Reuss–Hill (VRH) average, differential effective medium (DEM) model and squirt-flow model, a tight rock attenuation model is proposed for analyzing the attenuation characteristics of fluid-saturated rocks at different confining pressures. The model reasonably describes the S-wave attenuation characteristics. The model predictions of S-wave attenuation show apparent pressure- and fluid-sensitivity at full saturation and partial saturation conditions. For sample TS1-19 at full saturation with different confining pressures, the S-wave peak attenuation predicted by the model ranges from 11.6 to 69.5, and decreases with confining pressure, while the relaxation frequency shifts to high frequency end. For the partial saturation condition of the sample, the predicted S-wave peak attenuation ranges from 15.5 to 39.8 at a confining pressure of 30 MPa and increases with water saturation, while the relaxation frequency shifts to low frequency end. For all the samples at 30MPa confining pressure, the predicted S-wave attenuation ranges from 5.6 to 38.6. At the full-saturation case, the predicted S-wave attenuation increases with porosity and decreases with confining pressure. For the partial saturation case, the S-wave attenuation predicted with the model and the Voigt and Reuss bounds generally increases with water saturation, whereas the experimentally-measured attenuation exhibits the peak attenuation at an intermediate saturation. [ABSTRACT FROM AUTHOR]

Tight gas sandstone reservoirs play an important role in the field of exploration and development of unconventional oil/gas resources. However, these reservoirs typically exhibit low-porosity and poor-permeability, with pore structures of strong heterogeneity comprising connected and isolated pores. The traditional rock physics models (such as the Gassmann model) are established under the assumption of fully connected pores, which cannot reasonably describe the complexity in tight reservoirs. In this regard, this work proposes a rock physics modeling approach aimed at tight sandstone reservoirs based on a reformulated Xu–White model. Specifically, the differential effective medium model and Xu–White model are combined to analyze the influences of isolated pores on the dry rock skeleton. To characterize the general effects due to the different pore types on rock elastic moduli, the volume content of connected pores is defined as a pore-connectivity parameter. The simulated annealing algorithm is applied to invert the parameter, which is treated as a weighting coefficient for correcting the wet rock elastic moduli, thereby improving the precision of rock physics modeling. The proposed approach is tested and verified by using the log data of the work area of Sichuan Basin, West China. The result shows that, compared with the conventional method, the P- and S-wave velocities predicted by the proposed method are consistent with the log data. In addition to the inversion results of the conventional petrophysical parameters, the inverted pore-connectivity parameter can be a good auxiliary attribute that assists locating potential targets for tight gas sandstone reservoirs. [ABSTRACT FROM AUTHOR]

Fracture orientation and in particular the fracture strike play an important role in guiding the accurate estimation of the orientation of in situ stress fields. Fracture strike can be extracted based on the azimuthal seismic reflection responses. Thus, the characteristics of seismic reflection responses varying with fracture strike are critical for fracture strike estimation. In this work, a set of vertical fractures with different strikes is introduced into an isotropic host matrix based on the Schoenberg linear-slip theory, and the azimuthal seismic reflection response is modeled based on the reflection/transmission analysis at a plane interface. The effect of fracture parameters, i.e., fracture density, fracture aspect ratio, and fluid infill on the seismic reflection response, is analyzed. The influences of fracture strike on the stiffness matrix are simulated, and we further discuss the impacts on the P- and S-wave velocities. The influences of fracture strike on the reflection coefficient are depicted using the rose diagram method. The proposed workflow is applied to real seismic reflection data. The method is used to estimate the fracture strike with the seismic data in the Sichuan Basin work area by assuming that all fractures are vertically oriented, and the rose diagram is obtained close to the target layer. The results show that the fracture strike predicted by the method is in good agreement with the estimation based on the well-bore imaging data. [ABSTRACT FROM AUTHOR]

The elastic stress–strain relation of deep source rocks must account for the presence of fractures and lamination due to thermally mature kerogen layers. Clay lamination describes the variation in transverse isotropy with a vertical symmetry (VTI) characteristic of shale background, and vertical fractures induce the transverse isotropy with a horizontal symmetry (HTI) perturbations. Thus, the fractured shale rock can be described as a medium with an orthorhombic symmetry in terms of effective anisotropy. We present a new workflow for calculating the elastic constants of a pressure-dependent fractured shale rock and the effects of clay lamination and microfractures. We investigate the shale fabric that can result in the orthorhombic elastic symmetry and the effect of pressure on elastic parameters, and propose an inversion methodology. Results based on well-log data show that the proposed methodology can be effectively applied to field data. [ABSTRACT FROM AUTHOR]

The acoustic properties of rocks depend on porosity, pressure, and pore fluid and also on pore geometry. Anelasticity (attenuation and velocity dispersion) is more affected by crack aspect ratio and fraction (soft pores) than by equant (stiff) pores. To study this fact, we have performed ultrasonic measurements on two dolomite samples under variable pressure and fluid content, and used the EIAS (equivalent inclusion-average stress) model to obtain the crack aspect ratio and fraction from the bulk and shear moduli of the rock. The theory has an excellent agreement with the experimental data, and the results show that the crack attributes decrease with increasing differential pressure and are higher for a stiffer fluid. In fact, the interpretation of the experiments with the model shows that crack fraction and aspect ratio increase with the bulk modulus of the fluid (water and oil). Then, by extending the theory to all frequencies, using the Zener mechanical model, we obtain the phase velocities and quality factors as a function of frequency. Our findings reveal the importance of considering differential pressure and fluid type to analyze pore geometry and rock anelasticity. [ABSTRACT FROM AUTHOR]