Search

Tight gas sandstone reservoirs play an important role in the field of exploration and development of unconventional oil/gas resources. However, these reservoirs typically exhibit low-porosity and poor-permeability, with pore structures of strong heterogeneity comprising connected and isolated pores. The traditional rock physics models (such as the Gassmann model) are established under the assumption of fully connected pores, which cannot reasonably describe the complexity in tight reservoirs. In this regard, this work proposes a rock physics modeling approach aimed at tight sandstone reservoirs based on a reformulated Xu–White model. Specifically, the differential effective medium model and Xu–White model are combined to analyze the influences of isolated pores on the dry rock skeleton. To characterize the general effects due to the different pore types on rock elastic moduli, the volume content of connected pores is defined as a pore-connectivity parameter. The simulated annealing algorithm is applied to invert the parameter, which is treated as a weighting coefficient for correcting the wet rock elastic moduli, thereby improving the precision of rock physics modeling. The proposed approach is tested and verified by using the log data of the work area of Sichuan Basin, West China. The result shows that, compared with the conventional method, the P- and S-wave velocities predicted by the proposed method are consistent with the log data. In addition to the inversion results of the conventional petrophysical parameters, the inverted pore-connectivity parameter can be a good auxiliary attribute that assists locating potential targets for tight gas sandstone reservoirs. [ABSTRACT FROM AUTHOR]

In recent years, the Yanchang shale-oil formations of the Ordos Basin are rich in reserves with complex lithology and structure characteristics, low porosity and low permeability, and weak anomalies for oil and water discriminations, have been the key targets of unconventional oil/gas resource exploration and development in the relevant areas. The joint acoustic-electrical (AE) properties can be used to interpret reservoir lithology, mineralogy, pore structure, and fluid saturation. To conduct tests of thin section analysis, X-ray diffraction, and ultrasonic and electrical experiments at different pressures and saturation degrees, cores from the shale-oil formations in the Q area of the basin are collected. The variations in AE properties with respect to clay content, porosity, pressure (microfracture), and saturation are analyzed. The experimental results indicate that the rock physics behaviors of sandstones with different clay contents vary significantly. The AE properties of clean sandstones are basically dependent on the microfractures (pressure), while for muddy sandstones, the clay content is an important factor affecting the responses. The target reservoir consists of interbedded sandstone and shale layers. The AE equivalent medium equations and the Gurevich theory are applied to establish the joint models for the different lithologies and simulate the variations in AE properties with respect to fluid type, pore structure, and mineral components. The three-dimensional joint templates of clean and muddy sandstones, as well as shale, are developed based on the elastic and electrical attributes and then calibrated using the experimental and well-log data. The reservoir properties are estimated with the templates and validated by the log data. The results indicate that the joint templates based on lithology characteristics can effectively characterize the properties of interbedded sandstone and shale layers. Furthermore, the combined application of AE data provides more beneficial information for the assessment of rock properties, leading to precise estimates that conform with the actual formation conditions. [ABSTRACT FROM AUTHOR]

The wave-induced local fluid flow mechanism is relevant to the complex heterogeneity of pore structures in rocks. The analysis of the local fluid flow mechanism is useful for accurately describing the wave propagation characteristics in reservoir rocks. In the exploration and production of hydrocarbon reservoirs, the real stratum may be partially saturated with a multi-phase fluid mixture in general. Therefore, it is of great significance to investigate the wave velocity dispersion and attenuation features in relation to pore structures and fluids. In this work, the characteristics of fabric microstructures are obtained on the basis of pressure dependency of dry rock moduli using the effective medium theory. A novel anelasticity theoretical model for the wave propagation in a partially-saturated medium is presented by combining the extended Gurevich squirt-flow model and White patchy-saturation theory. Numerical simulations are used to analyze wave propagation characteristics that depend on water saturation, external patchy diameter, and viscosity. We consider a tight sandstone from the Qingyang area of the Ordos Basin in west China and perform ultrasonic measurements under partial saturation states and different confining pressures, where the basic properties of the rock are obtained at the full gas saturation. The comparison of experimental data and theoretical modeling results shows a fairly good agreement, indicating that the new theory is effective. [ABSTRACT FROM AUTHOR]

We simulate the effects of diagenesis, cementation and compaction on the elastic properties of shales and sandstones with four different petro-elastic theories and a basin-evolution model, based on constant heating and sedimentation rates. We consider shales composed of clay minerals, mainly smectite and illite, depending on the burial depth, and the pore space is assumed to be saturated with water at hydrostatic conditions. Diagenesis in shale (smectite/illite transformation here) as a function of depth is described by a fifth-order kinetic equation, based on an Arrhenius reaction rate. On the other hand, quartz cementation in sandstones is based on a model that estimates the volume of precipitated quartz cement and the resulting porosity loss from the temperature history, using an equation relating the precipitation rate to temperature. Effective pressure effects (additional compaction) are accounted for using the Athy equation and the Hertz–Mindlin model. The petro-elastic models yield similar seismic velocities, despite the different levels of complexity and physics approaches, with increasing density and seismic velocities as a function of depth. The methodology provides a simple procedure to obtain the velocity of shales and sandstones versus temperature and pressure due to the diagenesis-cementation-compaction process. [ABSTRACT FROM AUTHOR]