Search

A novel phosphorus, nitrogen-containing compound, poly(4, 4′-diaminodiphenyl methane phenyl dichlorophosphate) (PDMPD) with high thermal stability was synthesized. The PDMPD was then incorporated into polystyrene (PS) to be used as halogen-free flame retardant. Moreover, small amounts of two boron-containing compounds, Zinc borate (ZnB) and boron phosphate (BP) were combined with PDMPD,to explore effective flame-retardant formulations for PS. The flammability and the thermal properties of the composites were evaluated using limiting oxygen index (LOI) test, microscale combustion calorimeter (MCC) and thermogravimetric analysis (TGA) respectively. A Fourier transform infrared (FTIR) spectroscopy coupled with a thermogravimetric analyzer (TG-IR) was also used to study the gas phase from the degradation of PS composites. Furthermore, the char residues of the samples were investigated by scanning electron microscopy (SEM) and FTIR. The results showed that the incorporation of PDMPD can significantly decrease the flammability of virgin PS, and enhance the thermal stability at high temperature region, in both nitrogen and air atmosphere. A combination of PDMPD with small amounts of boron compounds can further decrease the flammability. [ABSTRACT FROM AUTHOR]

Two kinds of novel phosphorus-containing polyether toughening agents were synthesized and characterized by H nuclear magnetic resonance (H NMR) and Fourier transform infrared spectra (FTIR). Afterwards, a series of phenolic foams with different loadings of phosphorus-containing toughening agents were prepared. The apparent density and scanning electron microscopy (SEM) results showed that the addition of 5 wt% toughening agents increased the expansion ratio and promoted the formation of uniform cells. The limiting oxygen index (LOI) values of modified phenolic foams decreased with the increase of modifier content, but it still remained at 40% even if the amount of modifier loadings was 10 wt%. UL-94 results showed all samples can pass V0 rating, indicating the modified foams still have great flame retardance. Microscale combustion calorimetry (MCC) results indicated that the peak heat release rate (PHRR) and total heat release (THR) of the modified foams were reduced by 42% and 35%, respectively, compared to the pure phenolic foams. Moreover, the thermal stability of samples was investigated by thermogravimetric analysis (TGA). The mechanical properties were evaluated and correlated with composition and structural features. [ABSTRACT FROM AUTHOR]