Search

The design and technology for the fabrication of an asymmetric stepped InAs/InAs1 –ySby/InAsSbP heterostructure with an ultimate InSb content (up to y = 0.17) in the narrow-gap active region by vapor-phase epitaxy from metal-organic compounds are developed. The electroluminescence characteristics of long-wavelength LEDs based on the proposed heterostructure, which emits in the spectral range of 4.6–5.3 μm, are studied. A linear decrease in the quantum efficiency of the electroluminescence with increasing InSb content in the active layer of the LEDs obtained is revealed. The advantage of using the asymmetric heterostructure for fabricating LEDs with a working wavelength of more than 4.5 μm is shown. [ABSTRACT FROM AUTHOR]

Layers of the GaSb1 − x As x alloy with arsenic content in the range x = 0.06–0.15 have been grown for the first time on InAs (100) substrates by metal-organic vapor-phase epitaxy. A new approach to the calculation of the band diagram of the GaSbAs alloy is suggested. It is demonstrated on the basis of magnetotransport measurements in p-GaSbAs/ p-InAs heterostructures and with the method suggested by the authors for the calculation of band diagrams for alloys in the GaSbAs system that, in the composition range under study, the GaSbAs/InAs heterojunction is a type II broken-gap heterojunction. [ABSTRACT FROM AUTHOR]

High-quality type II Ga[sub 0.83]In[sub 0.17]As[sub 0.22]Sb[sub 0.78]/InAs heterostructures based on GaSb-rich quaternary solid solutions were grown by liquid phase epitaxy on InAs(001) substrates. GaInAsSb epilayers were grown under planar two-dimensional growth conditions with abrupt and planar interfaces. The thickness of the transition layer on the Ga[sub 0.83]In[sub 0.17]As[sub 0.22]Sb[sub 0.78]/InAs interface enriched with In and Sb was 10-12 Å in perfect structures. The roughness of the upper boundary was entirely determined by the epitaxial-growth conditions and did not exceed 500 Å in structures with a layer thickness of about 2 µm. [ABSTRACT FROM AUTHOR]